中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 33521.31-2023 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第31部分:建筑物内人体暴露评价的现场测量指南(中英文版) Mechanical vibrations - Ground-induced structure-borne noise and ground-borne vibrations from rail systems - Part 31: Guidelines for field measurements for the assessment of human exposure in buildings |
|||
GB/T 18779.3-2023 产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于测量不确定度表述达成共识的指南(中英文版) Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment - Part 3: Guidance on reaching consensus on the expression of measurement uncertainty |
|||
GB/T 18779.2-2023 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分:GPS测量、测量设备校准和产品验证中的测量不确定度评估指南(中英文版) Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification |
|||
GB/T 43517-2023 物理环境的人类工效学 通过环境调查(物理量测量和人的主观评价)对环境进行评估(中英文版) Ergonomics of the physical environment Assessment of the environment through environmental surveys (measurements of physical quantities and subjective human evaluations) |
|||
GB/Z 6113.404-2023 无线电骚扰和抗扰度测量设备和测量方法规范 第4-4部分:不确定度、统计学和限值建模 投诉的统计和保护无线电业务的限值计算模型(中英文版) Specification for radio disturbance and immunity measuring equipment and measurement methods Part 4-4: Uncertainty, statistics and limit value modeling Statistics of complaints and limit value calculation model for the protection of radio services |
|||
GB/T 43248-2023 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法(中英文版) Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz |
|||
GB/T 41311.1-2022 声学 描述船舶水下噪声的量及其测量方法 第1部分:用于比对目的的深水精密测量要求(中英文版) Acoustics - Describe the quantity of underwater noise from ships and methods of measurement - Part 1: Requirements for precision measurements in deep water for comparison purposes |
|||
GB/T 24622-2022 绝缘子表面憎水性测量导则(中英文版) Guidance on the measurement of hydrophobicity of insulator surfaces |
|||
GB/T 8446.2-2022 电力半导体器件用散热器? 第2部分:热阻和流阻测量方法(中英文版) Heat sinks for power semiconductor devices—Part 2: Measurement methods of thermal resistance and inlet-outlet fluid pressure drop |
|||
GB/T 27430-2022 测量不确定度在合格评定中的作用(中英文版) The Function of Measurement Uncertainty in Conformity Assessment |
|||
GB/T 41914.2-2022 微细气泡技术 微细气泡使用和测量通则 第2部分:微细气泡属性分类(中英文版) Microbubble technology General rules for the use and measurement of microbubbles Part 2: Classification of microbubble properties |
|||
GB/T 28784.5-2022 机械振动 船舶振动测量 第5部分:客船和商船适居性振动测量、评价和报告准则(中英文版) Mechanical vibration - Measurement of vibration in ships - Part 5: Guidelines for the measurement, evaluation and reporting of vibration for the habitability of passenger and merchant ships |
|||
GB/T 41914.1-2022 微细气泡技术 微细气泡使用和测量通则 第1部分:术语(中英文版) Fine bubble technology - General rules for the use and measurement of fine bubbles - Part 1: Terminology |
|||
GB/T 19668.7-2022 信息技术服务 监理 第7部分:监理工作量度量要求(中英文版) Information technology services—Supervision—Part 7: Requirements for the measurement of supervision workload |
|||
GB/T 40346-2021 植物保护机械 水平喷杆喷雾机潜在喷雾漂移试验台测量方法(中英文版) Equipment for crop protection—Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench |
|||
GB/T 33521.32-2021 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分:大地的动态性能测量(中英文版) Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground |
|||
GB/T 20728-2021 封闭管道中流体流量的测量 科里奥利流量计的选型、安装和使用指南(中英文版) Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters |
|||
GB/T 18703-2021 机械振动与冲击 手传振动 手套掌部振动传递率的测量与评价(中英文版) Mechanical vibration and shock—Hand-arm vibration—Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
|||
GB/T 40071-2021 纳米技术 石墨烯相关二维材料的层数测量 光学对比度法(中英文版) Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Optical contrast method |
|||
GB/T 17934.1-2021 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第1部分:参数与测量方法(中英文版) Graphic technology-Process control for the production of half-tone colour separations,proof and production prints-Part 1:Parameters and measurement methods |
|||
GB/T 40069-2021 纳米技术 石墨烯相关二维材料的层数测量 拉曼光谱法(中英文版) Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Raman spectroscopy method |
|||
GB/T 21548-2021 光通信用高速直接调制半导体激光器的测量方法(中英文版) Methods of measurement of the high speed semiconductor lasers directly modulated for optical fiber communication systems |
|||
GB/T 20833.4-2021 旋转电机 绕组绝缘 第4部分:绝缘电阻和极化指数测量(中英文版) Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index |
|||
GB/T 20833.1-2021 旋转电机 绕组绝缘 第1部分:离线局部放电测量(中英文版) Rotating electrical machines—The winding insulation—Part 1:Off-line partial discharge measurements |
|||
GB/T 41204-2021 纳米技术 纳米物体表征用测量技术矩阵(中英文版) Nanotechnologies -- Measurement technique matrix for the characterization of nano-objects |
|||
GB/T 41105.3-2021 无损检测? X射线管电压的测量和评价 第3部分:能谱法(中英文版) Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method |
|||
GB/T 41105.2-2021 无损检测? X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查(中英文版) Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method |
|||
GB/T 41105.1-2021 无损检测 X射线管电压的测量和评价 第1部分:分压法(中英文版) Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method |
|||
GB/T 32483.2-2021 灯控制装置的效率要求 第2部分:高压放电灯(荧光灯除外) 控制装置效率的测量方法(中英文版) Energy performance of lamp controlgear—Part 2:Controlgear for high intensity discharge lamps(excluding fluorescent lamps)—Method of measurement to determine the efficiency of controlgear |
|||
GB/T 38852.2-2020 工业过程测量控制和自动化 系统评估中系统特性的评定 第2部分:评估方法学(中英文版) Industrial-process measurement, control and automation—Evaluation of system properties for the purpose of system assessment—Part 2: Assessment methodology |
|||
GB/T 39042-2020 电工钢单片磁性能测试 H线圈法(中英文版) Measurement of the magnetic properties of electrical steels by means of a single sheet tester—H-coil method |
|||
GB/T 38852.1-2020 工业过程测量控制和自动化 系统评估中系统特性的评定 第1部分:术语和基本概念(中英文版) Industrial-process measurement, control and automation—Evaluation of system properties for the purpose of system assessment—Part 1: Terminology and basic concepts |
|||
GB/T 38737-2020 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法(中英文版) Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production |
|||
GB/T 39643-2020 产品几何技术规范(GPS) 长度测量中温度影响引入的系统误差和测量不确定度来源(中英文版) Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
|||
GB/T 18779.6-2020 产品几何技术规范(GPS) 工件与测量设备的测量检验 第6部分:仪器和工件接受/拒收的通用判定规则(中英文版) Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
|||
GB/T 24635.4-2020 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第4部分:应用仿真技术评估特定任务的测量不确定度(中英文版) Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation |
|||
GB/T 24635.1-2020 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第1部分:概要和计量特性(中英文版) Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics |
|||
GB/T 10910-2020 农业轮式拖拉机和田间作业机械 驾驶员全身振动的测量(中英文版) Agricultural wheeled tractors and field machinery—Measurement of whole-body vibration of the operator |
|||
GB/T 19703-2020 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求(中英文版) In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation |
|||
GB 15744-2019 摩托车和轻便摩托车燃油消耗量限值及测量方法(中英文版) The limits and measurement methods of fuel consumption for motorcycles and mopeds |
|||
GB/T 38437-2019 用抽拉或旋转方式测量铁磁材料样品磁偶极矩的方法(中英文版) Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
|||
GB/T 16789-2019 比长基线测量规范(中英文版) Specifications of the baseline measurements |
|||
GB/T 18655-2018 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法(中英文版) Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers |
|||
GB/T 22319.11-2018 石英晶体元件参数的测量 第11部分:采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法(中英文版) Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction |
|||
GB/T 18502-2018 临界电流测量 银和/或银合金包套Bi-2212和Bi-2223氧化物超导体的直流临界电流(中英文版) Critical current measurement—DC critical current of Ag-and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
|||
GB/T 11048-2018 纺织品 生理舒适性 稳态条件下热阻和湿阻的测定(蒸发热板法)(中英文版) Textiles-Physiological effects-Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) |
|||
GB/T 35935-2018 动物毛纤维平均直径与分布试验方法 激光扫描纤维直径分析法(中英文版) Measurement of the mean and distribution of animal fibre diameter—Laserscan fibre diameter analysis method |
|||
GB/T 36611-2018 力学性能测量 Ag和/或Ag合金包套Bi-2223和Bi-2212复合超导体室温拉伸试验方法(中英文版) Mechanical properties measurement—Room temperature tensile test of Ag-and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
|||
GB/T 7341.5-2018 电声学 测听设备 第5部分:耳声阻抗/导纳的测量仪器(中英文版) Electroacoustics—Audiometric equipment—Part 5: Instruments for the measurement of aural acoustic impedance/admittance |
|||
GB/T 27419-2018 测量不确定度评定和表示 补充文件1: 基于蒙特卡洛方法的分布传播(中英文版) Guide to the evaluation and expression of uncertainty in measurement—Supplement 1: Propagation of distributions using a Monte Carlo method |
|||
GB/T 13338-2018 工业燃料炉热平衡测定与计算基本规则(中英文版) Basic rules for the measurement and calculation of thermal equilibrium of fuel-fired furnace in industry |
|||
GB/T 36969-2018 纳米技术-原子力显微术测定纳米薄膜厚度的方法(中英文版) Nanotechnology—Method for the measurement of the nanofilm-thickness by atomic force microscopy |
|||
GB/T 36982-2018 节目分配网络ASI数字光端机接口技术要求和测量方法(中英文版) Interface technical requirements and measurement methods of the digital optical line terminal used in program distribution network |
|||
GB/T 20441.2-2018 电声学 测量传声器 第2部分:采用互易技术对实验室标准传声器声压校准的原级方法(中英文版) Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
|||
GB/T 22159.5-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分:弹性支撑件低频平动动刚度的驱动点测量方法(中英文版) Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
|||
GB/T 22159.4-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第4部分:弹性非支撑件平动动刚度(中英文版) Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
|||
GB/T 34326-2017 表面化学分析 深度剖析 AES和XPS深度剖析时离子束对准方法及其束流或束流密度测量方法(中英文版) Surface chemical analysis—Depth profiling—Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS |
|||
GB/T 34579-2017 等离子显示设备150kHz~30MHz辐射骚扰限值和测量方法(中英文版) Methods of measurement and limits for radiated disturbances from plasma display panel equipment in the frequency range 150kHz to 30MHz |
|||
GB/T 34184-2017 红外光学玻璃红外折射率测试方法 偏折角法(中英文版) Test method for infrared refractive index of infrared optical glass—The deflection angle measurement |
|||
GB/T 25102.7-2017 电声学 助听器 第7部分:助听器生产、供应和交货时质量保证的性能特性测量(中英文版) Electroacoustics—Hearing aids—Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes |
|||
GB/T 25498.5-2017 电声学 人头模拟器和耳模拟器 第5部分:测量助听器和以插入方式与人耳耦合的耳机用2cm3声耦合器(中英文版) Electroacoustics—Simulators of human head and ear—Part 5:2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts |
|||
GB/T 7343-2017 无源EMC滤波器件抑制特性的测量方法(中英文版) Methods of measurement of the suppression characteristics of passive EMC filtering devices |
|||
GB/T 18271.3-2017 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验(中英文版) Process measurement and control devices—General methods and procedures for evaluating performance—Part 3: Tests for the effects of influence quantities |
|||
GB/Z 33902-2017 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法(中英文版) Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods |
|||
GB/T 33981-2017 高压交流断路器声压级测量的标准规程(中英文版) Standard practice for the measurement of sound pressure levels on high-voltage alternating current circuit-breakers |
|||
GB/T 8753.1-2017 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分:酸浸蚀失重法(中英文版) Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1:Measurement of the loss of mass after immersion in acid solution(s) |
|||
GB/T 19346.1-2017 非晶纳米晶合金测试方法 第1部分:环形试样交流磁性能(中英文版) Amorphous and nanocrystalline alloys measurement methods—Part 1:AC magnetic properties by the use of ring specimens |
|||
GB/T 28784.4-2017 机械振动 船舶振动测量 第4部分:船舶推进装置振动的测量和评价(中英文版) Mechanical vibration—Measurement of vibration on ships—Part 4: Measurement and evaluation of vibration of the ship propulsion machinery |
|||
GB/T 27418-2017 测量不确定度评定和表示(中英文版) Guide to the evaluation and expression of uncertainty in measurement |
|||
GB/T 12193-2017 移动通信调频接收机测量方法(中英文版) Methods of measurement for receivers employing F3E or G3E emission used in the mobile services |
|||
GB/Z 35140-2017 用差压装置测量流体流量 GB/T 2624范围之外的孔板、喷嘴和文丘里管的使用指南(中英文版) Measurement of fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624 |
|||
GB/T 12192-2017 移动通信调频发射机测量方法(中英文版) Methods of measurement for transmitters employing F3E or G3E emissions used in the mobile services |
|||
GB/T 33466.1-2016 硬聚氯乙烯管材 差示扫描量热法(DSC) 第1部分:加工温度的测量(中英文版) Rigid PVC pipes—Differential scanning calorimetry(DSC) method—Part 1: Measurement of the processing temperature |
|||
GB/T 33393-2016 鞋类 整鞋试验方法 稳态条件下热阻和湿阻的测定(中英文版) Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions |
|||
GB/T 20216-2016 纸浆和纸 有效残余油墨浓度(ERIC值)的测定 红外线反射率测量法(中英文版) Pulp and paper—Determination of the effective residual ink concentration (ERIC number)—Infrared reflectance measurement |
|||
GB/T 32483.1-2016 灯控制装置的效率要求 第1部分:荧光灯控制装置 控制装置线路总输入功率和控制装置效率的测量方法(中英文版) Energy performance of lamp controlgear—Part 1: Controlgear for fluorescent lamps—Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear |
|||
GB/T 32592-2016 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证(中英文版) Railway applications—Current collection systems—Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
|||
GB/T 32577-2016 轨道交通有人环境中电子和电气设备产生的磁场强度测量方法(中英文版) Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure |
|||
GB/T 32483.3-2016 灯控制装置的效率要求 第3部分:卤钨灯和LED模块 控制装置效率的测量方法(中英文版) Energy performance of lamp controlgear—Part 3: Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear |
|||
GB/T 20833.1-2016 旋转电机 旋转电机定子绕组绝缘 第1部分:离线局部放电测量(中英文版) Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 1: Off-line partial discharge measurements |
|||
GB/T 29023.2-2016 超声法颗粒测量与表征 第2部分:线性理论准则(中英文版) Measurement and characterization of particles by acoustic method—Part 2: Guidelines for linear theory |
|||
GB/T 20833.2-2016 旋转电机 旋转电机定子绕组绝缘 第2部分:在线局部放电测量(中英文版) Rotating electrical machines—The stator winding insulation of rotating electrical machines—Part 2: On-line partial discharge measurements on |
|||
GB/T 32241-2015 植物保护机械 喷雾飘移的实验室测量方法 风洞试验(中英文版) Equipment for crop protection—Methods for the laboratory measurement of spray drift—Wind tunnels |
|||
GB/T 4830-2015 工业自动化仪表 气源压力范围和质量(中英文版) Pressure range and quality of air supply for the industrial process measurement and control instruments |
|||
GB/T 32134-2015 羊毛颜色测定方法(中英文版) Method for the measurement of colour of raw wool |
|||
GB/T 32106-2015 塑料 在水性培养液中最终厌氧生物分解能力的测定 通过测量生物气体产物的方法(中英文版) Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production |
|||
GB/T 31885-2015 船舶和海上技术 大型游艇 涂层外观的测量和评估(中英文版) Ships and marine technology—Large yachts—Measurement and assessment of the visual appearance of coatings |
|||
GB/T 7274-2015 电子管极间电容测试方法(中英文版) Methods for the measurement of direct inter-electrode capacitances of electronic tubes and valves |
|||
GB/T 31556.2-2015 包装袋 尺寸描述和测量方法 第2部分:热塑性软质薄膜袋(中英文版) Packaging sacks—Description and method of measurement for dimension— Part 2:Sacks made from thermoplastic flexible film |
|||
GB/T 9869-2014 橡胶胶料 硫化特性的测定 圆盘振荡硫化仪法(中英文版) Rubber―Measurement of vulcanization characteristics with the oscillating disc curemeter |
|||
GB/T 31248-2014 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法(中英文版) Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions |
|||
GB/T 31113-2014 胶粘剂抗流动性试验方法(中英文版) Measurement of the resistance to flow for adhesive |
|||
GB/T 14790.2-2014 机械振动 人体暴露于手传振动的测量与评价 第2部分:工作场所测量实用指南(中英文版) Mechanical vibration―Measurement and evaluation of human exposure to hand-transmitted vibration―Part 2: Practical guidance for measurement at the workplace |
|||
GB/Z 30249-2013 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series |
|||
GB/T 30025-2013 起重机 起重机及其部件质量的测量(中英文版) Cranes - Measurement of the mass of a crane and its components |
|||
GB/T 19277.2-2013 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量(中英文版) Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test |
|||
GB/T 29787-2013 辐射防护仪器 测量环境中光子和中子辐射的移动式仪器(中英文版) Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment |
|||
GB/T 50076-2013 室内混响时间测量规范(中英文版) Code for measurement of the reverberation time in rooms |
|||
GB/T 29628-2013 永磁(硬磁)脉冲测量方法指南(中英文版) Guides for methods of measurement of the magnetic properties of permanent(magnetically hard)materials by pulsed field magnetometry |
|||
GB/T 9573-2013 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法(中英文版) Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
|||
GB/T 29088-2012 金属和合金的腐蚀 双环电化学动电位再活化测量方法(中英文版) Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method |
|||
GB/T 29293-2012 LED筒灯性能测量方法(中英文版) Measurement methods of the performance for LED downlights |
|||
GB/T 29305-2012 新的和老化后的纤维素电气绝缘材料粘均聚合度的测量(中英文版) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
|||
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
|||
GB/T 22159.2-2012 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分:弹性支撑件平动动刚度的直接测量方法(中英文版) Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
|||
GB/T 12079-2012 X射线管光电性能测试方法(中英文版) Measurements of the photoelectric properties for X-ray tubes |
|||
GB/T 28880-2012 无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定(中英文版) Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments |
|||
GB/T 28910-2012 原油流变性测定方法(中英文版) The measurement method of crude oil rheological properties |
|||
GB/T 6379.3-2012 测量方法与结果的准确度(正确度与精密度) 第3部分:标准测量方法精密度的中间度量(中英文版) Accuracy(trueness and precision) of measurement methods and results - Part 3:Intermediate measures of the precision of a standard measurement method |
|||
GB/T 11374-2012 热喷涂涂层厚度的无损测量方法(中英文版) Thermal spraying coating - Nondestructive methods for measurement of thickness |
|||
GB/T 2900.90-2012 电工术语 电工电子测量和仪器仪表 第4部分:各类仪表的特殊术语(中英文版) Electrotechnical terminology - Electrical and electronic measurements and measuring instruments - Part 4: Specific terms according to the type of instruments |
|||
GB/T 28470-2012 工业过程测量和控制系统用电动和气动模拟计算器性能评定方法(中英文版) Methods of evaluating the performance of electrical and pneumatic analogue computing unit for use in industrial process measurement and control systems |
|||
GB/T 26155.2-2012 工业过程测量和控制系统用智能电动执行机构 第2部分:性能评定方法(中英文版) Intelligent electrical actuators for industrial-process measurement and control systems - Part 2:Methods of evaluating the performance |
|||
GB/T 25749.5-2012 机械安全 空气传播的有害物质排放的评估 第5部分:测量不带导管出口的空气净化系统质量分离效率的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
|||
GB/T 25749.6-2012 机械安全 空气传播的有害物质排放的评估 第6部分:测量带导管出口的空气净化系统质量分离效率的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
|||
GB/T 25749.8-2012 机械安全 空气传播的有害物质排放的评估 第8部分:测量污染物浓度参数的室内法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter |
|||
GB/T 25749.7-2012 机械安全 空气传播的有害物质排放的评估 第7部分:测量污染物浓度参数的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter |
|||
GB/T 27756-2011 pH值测定用玻璃电极(中英文版) Glass electrodes for the measurement of pH value |
|||
GB/T 27846-2011 化学品 黏度测定Hoppler落球式黏度计法(中英文版) Chemicals - Measurement of viscosity using the Hoppler falling-ball viscometer |
|||
GB/T 27698.7-2011 热交换器及传热元件性能测试方法 第7部分:空冷器噪声测定(中英文版) Test method for the performance of heat exchangers and heat exchange element - Part 7: Measurement of noise from air-cooled heat exchangers |
|||
GB/T 9029-2011 录放音设备抖晃测量方法(中英文版) Methods of the measurement of speed fluctuations in sound recording and reproducing equipment |
|||
GB/T 27763-2011 声学 评价工作间声学性能的空间声场分布曲线的测量方法及参量表述(中英文版) Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
|||
GB/T 27761-2011 热重分析仪失重和剩余量的试验方法(中英文版) Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers |
|||
GB/T 27759-2011 流体流量测量 不确定度评定程序(中英文版) Measurement of fluid flow - Procedures for the evaluation of uncertainties |
|||
GB/T 27757-2011 pH值测定用参比电极(中英文版) Reference electrodes for the measurement of pH value |
|||
GB/T 27598-2011 照相化学品 无机物中微量元素的分析 电感耦合等离子体原子发射光谱(ICP-AES)法(中英文版) Photographic chemicals - Measurement methods of the trace elements in the inorganic compounds - Inductively coupled plasma atomic emission spectrometry (ICP-AES) |
|||
GB/T 27502-2011 电导率测量用校准溶液制备方法(中英文版) Preparation method of reference solutions for the measurement of conductivity |
|||
GB/T 27500-2011 pH值测定用复合玻璃电极(中英文版) Combined glass electrodes for the measurement of pH value |
|||
GB/T 4959-2011 厅堂扩声特性测量方法(中英文版) Methods of measurement for the characteristics of sound reinforcement in auditoria |
|||
GB 14023-2011 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法(中英文版) Vehicles, boats and internal combustion engine - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
|||
GB/T 26812-2011 离子选择电极校准溶液制备方法(中英文版) Preparation method of reference solutions for the measurement of ion selective electrodes |
|||
GB/Z 26157.7-2010 测量和控制数字数据通信 工业控制系统用现场总线 类型2:ControlNet和EtherNet/IP规范 第7部分:设备行规(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 2: ControlNet and EtherNet/IP specification - Part 7: Device profiles |
|||
GB/T 25927-2010 工业自动化仪表盘 盘面布置图的绘制方法(中英文版) Industrial-process measurement and control instrument panels - Methods of drawing the arrangement plan of panel area |
|||
GB/T 25926-2010 工业自动化仪表盘 接线接管图的绘制方法(中英文版) Industrial-process measurement and control instrument panels - Methods of drawing the wiring and piping diagrams |
|||
GB/T 26156.2-2010 工业过程测量和控制系统用智能调节器 第2部分:性能评定方法(中英文版) Intelligent adjusters for industrial-process measurement and control systems - Part 2: Methods of evaluating the performance |
|||
GB/T 26179-2010 光源的光谱辐射度测量(中英文版) The spectroradiometric measurement of light sources |
|||
GB/T 26257-2010 手柄电话助听器耦合技术要求和测量方法(中英文版) The requirements of hearing aids compatibility and measurement methods for telephone handset |
|||
GB/T 26271-2010 地面数字电视接收设备亮度与色差信号重合度技术要求及测量方法(中英文版) Technology requirements and measurement methods for the coincidence of luminance and color difference signal of terrestrial digital TV receiver equipment |
|||
GB/T 25885-2010 羊毛纤维平均直径及其分布试验方法 激光扫描仪法(中英文版) Measurement of the mean and distribution of fibre diameter for wool - The laserscan fiber diameter analyser |
|||
GB/T 25964-2010 石油和液体石油产品 采用混合式油罐测量系统测量立式圆筒形油罐内油品体积、密度和质量的方法(中英文版) Petroleum and liquid petroleum products - Determination of volume,density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems |
|||
GB/T 25749.4-2010 机械安全 空气传播的有害物质排放的评估 第4部分:测量排气系统捕获效率的示踪法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system |
|||
GB/T 18655-2010 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法(中英文版) Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
|||
GB/T 25749.3-2010 机械安全 空气传播的有害物质排放的评估 第3部分:测量给定污染物排放率的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
|||
GB/T 25753.2-2010 真空技术 罗茨真空泵性能测量方法 第2部分:零流量压缩比的测量(中英文版) Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput |
|||
GB/T 25758.5-2010 无损检测 工业X射线系统焦点特性 第5部分:小焦点和微焦点X射线管的有效焦点尺寸的测量方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes |
|||
GB/T 25749.2-2010 机械安全 空气传播的有害物质排放的评估 第2部分:测量给定污染物排放率的示踪气体法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
|||
GB/T 20441.3-2010 电声学 测量传声器 第3部分:采用互易技术对实验室标准传声器的自由场校准的原级方法(中英文版) Electroacoustics - Measurement microphone - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
|||
GB/T 25256-2010 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法(中英文版) Optical functional films - Release film - The measurement of peeling force at 180°angle and subsequent adhesion |
|||
GB/T 25134-2010 锻压制件及其模具三维几何量光学检测规范(中英文版) Optical measurement specification of 3D geometry for forgings/stampings and the dies |
|||
GB/T 13930-2010 水环真空泵和水环压缩机 气量测定方法(中英文版) Methods for the measurement of volume flow of gas of water-ring vacuum pumps and compressors |
找到:303條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |