中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 6683.3-2023 石油及相关产品 测量方法与结果精密度 第3部分:试验方法已发布精密度数据的监测和验证(中英文版) Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods |
|||
GB/Z 17626.33-2023 电磁兼容 试验和测量技术 第33部分:高功率瞬态参数测量方法(中英文版) Electromagnetic compatibility - Testing and measurement techniques - Part 33: Measurement methods for high power transient parameters |
|||
GB/T 41312.2-2023 化工用设备渗透性检测方法 第2部分:纤维增强热固性塑料设备(中英文版) Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment |
|||
GB/T 13465.12-2023 不透性石墨材料试验方法 第12部分:导热系数(中英文版) Test methods for impermeable graphite materials Part 12: Thermal conductivity |
|||
GB/T 43413-2023 无损检测 红外热成像检测 热弹性应力测量方法通则(中英文版) Non-destructive testing Infrared thermal imaging testing General rules for thermoelastic stress measurement methods |
|||
GB/T 41312.3-2023 化工用设备渗透性检测方法 第3部分:塑料及其衬里设备(中英文版) Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment |
|||
GB/T 33643-2022 无损检测? 声发射泄漏检测方法(中英文版) Non-destructive testing—Test methods for leak detection by means of acoustic emission |
|||
GB/T 42287-2022 高电压试验技术 电磁和声学法测量局部放电(中英文版) High Voltage Test Techniques Electromagnetic and Acoustic Methods for Partial Discharge Measurements |
|||
GB/T 42140-2022 信息技术 云计算 云操作系统性能测试指标和度量方法(中英文版) Information technology; Cloud computing; Cloud operating system performance testing indicators and measurement methods |
|||
GB/T 1038.1-2022 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分:差压法(中英文版) Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method |
|||
GB/T 1038.2-2022 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分:等压法(中英文版) Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method |
|||
GB/T 15972.31-2021 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength |
|||
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版) Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|||
GB/T 20485.43-2021 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准(中英文版) Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation |
|||
GB/T 20485.32-2021 振动与冲击传感器校准方法 第32部分:谐振测试 用冲击激励测试加速度计的频率和相位响应(中英文版) Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation |
|||
GB/T 15972.47-2021 光纤试验方法规范 第47部分:传输特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - Macrobending loss |
|||
GB/T 9966.9-2021 天然石材试验方法 第9部分:通过测量共振基本频率测定动力弹性模数(中英文版) Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency |
|||
GB/T 15972.34-2021 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版) Specifications for optical fibre test methods—Part 34:Measurement methods and test procedures for mechanical characteristics—Fibre curl |
|||
GB/T 15972.10-2021 光纤试验方法规范 第10部分:测量方法和试验程序 总则(中英文版) Specifications for optical fibre test methods-Part 10:Measurement methods and test procedures-General and guidance |
|||
GB/T 15972.20-2021 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods-Part 20:Measurement methods and test procedures for dimensions- Fibre geometry |
|||
GB/T 15972.42-2021 光纤试验方法规范 第42部分:传输特性的测量方法和试验程序 波长色散(中英文版) Specifications for optical fibre test methods—Part 42:Measurement methods and test procedures for transmission characteristics—Chromatic dispersion |
|||
GB/T 15972.30-2021 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test |
|||
GB/T 15972.41-2021 光纤试验方法规范 第41部分:传输特性的测量方法和试验程序 带宽(中英文版) Specifications for optical fibre test methods-Part 41:Measurement methods and test procedures for transmission characteristics-Bandwidth |
|||
GB/T 15972.43-2021 光纤试验方法规范 第43部分:传输特性的测量方法和试验程序 数值孔径(中英文版) Specifications for optical fibre test methods—Part 43: Measurement methods and test procedures for transmission characteristics—Numerical aperture |
|||
GB/T 15972.54-2021 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照(中英文版) Specifications for optical fibre test methods—Part 54:Measurement methods and test procedures for environmental characteristics—Gamma irradiation |
|||
GB/T 15972.45-2021 光纤试验方法规范 第45部分:传输特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods—Part 45:Measurement methods and test procedures for transmission characteristics—Mode field diameter |
|||
GB/T 5095.2507-2021 电子设备用机电元件 基本试验规程及测量方法 第25-7部分:试验25g:阻抗、反射系数和电压驻波比(VSWR)(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) |
|||
GB/T 5095.2505-2021 电子设备用机电元件 基本试验规程及测量方法 第25-5部分:试验25e:回波损耗(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5:Test 25e: Return loss |
|||
GB/T 5095.2504-2021 电子设备用机电元件 基本试验规程及测量方法 第25-4部分:试验25d:传输时延(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay |
|||
GB/T 5095.2503-2021 电子设备用机电元件 基本试验规程及测量方法 第25-3部分:试验25c:上升时间衰减(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation |
|||
GB/T 5095.2502-2021 电子设备用机电元件 基本试验规程及测量方法 第25-2部分:试验25b:衰减(插入损耗)(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss) |
|||
GB/T 5095.2501-2021 电子设备用机电元件 基本试验规程及测量方法 第25-1部分:试验25a:串扰比(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio |
|||
GB/T 5095.2307-2021 电子设备用机电元件 基本试验规程及测量方法 第23-7部分:屏蔽和滤波试验 试验23g:连接器的有效转移阻抗(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors |
|||
GB/T 5095.2304-2021 电子设备用机电元件 基本试验规程及测量方法 第23-4部分:屏蔽和滤波试验 试验23d:时域内传输线的反射(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain |
|||
GB/T 5095.2303-2021 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method |
|||
GB/T 6113.104-2021 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements |
|||
GB/T 15972.32-2021 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical characteristics—Coating strippability |
|||
GB/T 15972.49-2021 光纤试验方法规范 第49部分:传输特性的测量方法和试验程序 微分模时延(中英文版) Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission characteristics—Differential mode delay |
|||
GB/T 12967.1-2020 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分:耐磨性的测定(中英文版) Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance |
|||
GB/T 5095.2509-2020 电子设备用机电元件 基本试验规程及测量方法 第25-9部分:信号完整性试验 试验25i:外来串扰(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk |
|||
GB/T 5095.2506-2020 电子设备用机电元件 基本试验规程及测量方法 第25-6部分:试验25f:眼图和抖动(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6:Test 25f:Eye pattern and jitter |
|||
GB/T 38446-2020 微机电系统(MEMS)技术 带状薄膜抗拉性能的试验方法(中英文版) Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films |
|||
GB/T 39585-2020 光电测量 配光测试系统的性能要求和检测方法(中英文版) Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 37617-2019 纳滤膜表面Zeta电位测试方法 流动电位法(中英文版) Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential measurement |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 24218.15-2018 纺织品 非织造布试验方法 第15部分:透气性的测定(中英文版) Textiles—Test methods for nonwovens—Part 15: Determination of air permeability |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 6113.105-2018 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分:无线电骚扰和抗扰度测量设备-5MHz~18GHz天线校准场地和参考试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
|||
GB/T 15972.44-2017 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods—Part 44: Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength |
|||
GB/T 18271.3-2017 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验(中英文版) Process measurement and control devices—General methods and procedures for evaluating performance—Part 3: Tests for the effects of influence quantities |
|||
GB/T 18271.2-2017 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验(中英文版) Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions |
|||
GB/T 519-2017 充气轮胎物理性能试验方法(中英文版) Test methods for measuring physical properties of pneumatic tyres |
|||
GB/T 33643-2017 无损检测 声发射泄漏检测方法(中英文版) Non-destructive testing—Test methods for leak detection by means of acoustic emission |
|||
GB/T 33580-2017 橡胶塑料挤出机能耗检测方法(中英文版) Testing and measuring methods of energy consumption for rubber and plastics extruder |
|||
GB/T 16601.4-2017 激光器和激光相关设备 激光损伤阈值测试方法 第4部分:检查、探测和测量(中英文版) Lasers and laser-related equipment—Test methods for laser-induced damage threshold—Part 4: Inspection,detection and measurement |
|||
GB/T 33393-2016 鞋类 整鞋试验方法 稳态条件下热阻和湿阻的测定(中英文版) Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions |
|||
GB/T 6113.104-2016 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分: 无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements |
|||
GB/T 15972.48-2016 光纤试验方法规范 第48部分:传输特性和光学特性的测量方法和试验程序 偏振模色散(中英文版) Specifications for optical fibre test methods—Part 48: Measurement methods and test procedures for transmission and optical characteristics—Polarization mode dispersion |
|||
GB/T 13277.3-2015 压缩空气 第3部分:湿度测量方法(中英文版) Compressed air—Part 3: Test methods for measurement of humidity |
|||
GB/T 32361-2015 分离膜孔径测试方法 泡点和平均流量法(中英文版) Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test |
|||
GB/T 31969-2015 灯用稀土三基色荧光粉试验方法 荧光粉二次特性的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps—Measurement of phosphors application character |
|||
GB/T 21223.1-2015 老化试验数据统计分析导则 第1部分:建立在正态分布试验结果的平均值基础上的方法(中英文版) Guide for the statistical analysis of ageing test data—Part 1: Methods based on mean values of normally distributed test results |
|||
GB/T 5594.7-2015 电子元器件结构陶瓷材料性能测试方法 第7部分:透液性测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 7: Test method for liquid permeability |
|||
GB/T 5594.3-2015 电子元器件结构陶瓷材料性能测试方法 第3部分:平均线膨胀系数测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 3: Test method for mean coefficient of linear expansion |
|||
GB/T 31248-2014 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法(中英文版) Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions |
|||
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
|||
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
|||
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
GB/T 17626.24-2012 电磁兼容 试验和测量技术 HEMP传导骚扰保护装置的试验方法(中英文版) Electromagnetic compatibility - Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance |
|||
GB/T 27693-2011 工业车辆安全 噪声辐射的测量方法(中英文版) Safety of industrial trucks - Test methods for measuring noise emissions |
|||
GB/T 27903-2011 电梯层门耐火试验 完整性、隔热性和热通量测定法(中英文版) Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux |
|||
GB/T 27694-2011 工业车辆安全 振动的测量方法(中英文版) Safety of industrial trucks - Test methods for measuring vibration |
|||
GB/T 26681-2011 地面数字电视标准测试发射机技术要求和测量方法(中英文版) Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television |
|||
GB/T 26682-2011 地面数字电视标准测试接收机技术要求和测量方法(中英文版) Technical requirements and methods of measurement for standard testing receiver of digital terrestial television |
|||
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
|||
GB/Z 6113.405-2010 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模替换试验方法的使用条件(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
|||
GB/T 6616-2009 半导体硅片电阻率及硅薄膜薄层电阻测试方法 非接触涡流法(中英文版) Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge |
|||
GB/T 1553-2009 硅和锗体内少数载流子寿命测定光电导衰减法(中英文版) Test methods for minority carrier lifetime in bulk germanium and silicon by measurement of photoconduetivity decay |
|||
GB/T 15972.55-2009 光纤试验方法规范 第55部分:环境性能的测量方法和试验程序-氢老化(中英文版) Specifications for optical fibre test methods - Part 55: Measurement methods and test procedures for environmental characteristics-hydrogen aging |
|||
GB/T 24196-2009 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则(中英文版) Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
|||
GB/T 4909.2-2009 裸电线试验方法 第2部分:尺寸测量(中英文版) Test methods for bare wires - Part 2: Measurement of dimensions |
|||
GB/T 14625.5-2008 篮球、足球、排球、手球试验方法 第5部分:圆周长、圆周差的测量(中英文版) Test methods for basketball, football, volleyball and handball - Part 5: Measurement of circumference and its variation |
|||
GB/T 14625.2-2008 篮球、足球、排球、手球试验方法 第2部分:反弹高度测定方法(中英文版) Test methods for basketball, football, volleyball and handball - Part 2: The measurement of bouncing altitude |
|||
GB/T 14625.1-2008 篮球、足球、排球、手球试验方法 第1部分:圆度测定方法(中英文版) Test methods for basketball, football, volleyball and handball - Part 1: The measurement of roundness |
|||
GB/T 7106-2008 建筑外门窗气密、水密、抗风压性能分级及检测方法(中英文版) Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors |
|||
GB/T 17548-2008 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南(中英文版) Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards |
|||
GB/T 2951.11-2008 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
|||
GB/T 2951.13-2008 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test |
|||
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|||
GB/T 519-2008 充气轮胎物理性能试验方法(中英文版) Test methods for measuring physical properties of pneumatic tyres |
|||
GB/T 12967.2-2008 铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus |
|||
GB/T 12967.1-2008 铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性(中英文版) Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus |
|||
GB/T 5262-2008 农业机械 试验条件测定方法的一般规定(中英文版) Agricultural machinery testing conditions-general rules for measuring methods |
|||
GB/T 15972.10-2008 光纤试验方法规范 第10部分:测量方法和试验程序 总则(中英文版) Specifications for optical fibre test methods - Part 10: Measurement methods and test procedures - General and guidance |
|||
GB/T 15972.30-2008 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验(中英文版) Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test |
|||
GB/T 15972.20-2008 光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版) Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry |
|||
GB/T 15972.40-2008 光纤试验方法规范 第40部分:传输特性和光学特性的测量方法和试验程序 衰减(中英文版) Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation |
|||
GB/T 15972.50-2008 光纤试验方法规范 第50部分:环境性能的测量方法和试验程序 恒定湿热(中英文版) Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) |
|||
GB/T 15972.45-2008 光纤试验方法规范 第45部分:传输特性和光学特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter |
|||
GB/T 15972.31-2008 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|||
GB/T 15972.32-2008 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|||
GB/T 15972.34-2008 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲(中英文版) Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl |
|||
GB/T 15972.41-2008 光纤试验方法规范 第41部分:传输特性和光学特性的测量方法和试验程序 带宽(中英文版) Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth |
|||
GB/T 15972.42-2008 光纤试验方法规范 第42部分:传输特性和光学特性的测量方法和试验程序 波长色散(中英文版) Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion |
|||
GB/T 15972.21-2008 光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数(中英文版) Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry |
|||
GB/T 15972.22-2008 光纤试验方法规范 第22部分:尺寸参数的测量方法和试验程序 长度(中英文版) Specifications for optical fibre test methods - Part 22: Measurement methods and test procedures for dimensions - Length measurement |
|||
GB/T 15972.46-2008 光纤试验方法规范 第46部分:传输特性和光学特性的测量方法和试验程序 透光率变化(中英文版) Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance |
|||
GB/T 15972.47-2008 光纤试验方法规范 第47部分:传输特性和光学特性的测量方法和试验程序 宏弯损耗(中英文版) Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss |
|||
GB/T 15972.49-2008 光纤试验方法规范 第49部分:传输特性和光学特性的测量方法和试验程序-微分模时延(中英文版) Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay |
|||
GB/T 15972.51-2008 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热(中英文版) Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat |
|||
GB/T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版) Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
|||
GB/T 15972.53-2008 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水(中英文版) Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion |
|||
GB/T 15972.54-2008 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照(中英文版) Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental characteristics - Gamma irradiation |
|||
GB/T 15972.44-2008 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长(中英文版) Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength |
|||
GB/T 15972.43-2008 光纤试验方法规范 第43部分:传输特性和光学特性的测量方法和试验程序 数值孔径(中英文版) Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture |
|||
GB/T 6113.105-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz~1000MHz天线校准用试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz |
|||
GB/T 778.3-2007 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第3部分:试验方法和试验设备(中英文版) Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment |
|||
GB/Z 6113.401-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分: 不确定度、统计学和限值建模 标准化的EMC试验不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests |
|||
GB 20936.1-2007 可燃性气体探测用电气设备 第1部分:通用要求和试验方法(中英文版) Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirement and test methods |
|||
GB/T 19922-2005 硅片局部平整度非接触式标准测试方法(中英文版) Standard test methods for measuring site flatness on silicon wafers by noncontact scanning |
|||
GB/T 19388-2003 轿车轮胎滚动周长试验方法(中英文版) Test methods of measuring rolling circumference for passenger car tyres |
|||
GB/T 6982-2003 软包装容器透湿度试验方法(中英文版) Test methods for water vapor permeability of flexible containers |
|||
GB/T 18902-2002 超高频测距仪性能要求和测试方法(中英文版) Performance requirements and test methods for UHF measuring distance equipment(MDE) |
|||
GB/T 18271.3-2000 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验(中英文版) Process measurement and control devices--General methods and procedures for evaluating performance--Part 3:Tests for the effects of influence quantities |
|||
GB/T 18271.2-2000 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验(中英文版) Process measurement and control devices--General methods and procedures for evaluating performance--Part 2:Tests under reference conditions |
|||
GB/T 8554-1998 电子和通信设备用变压器和电感器 测量方法及试验程序(中英文版) Transformers and inductors for use in electronic and telecommunication equipment--Measuring methodsand test procedures |
|||
GB/T 5095.3-1997 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests |
|||
GB/T 5095.11-1997 电子设备用机电元件 基本试验规程及测量方法 第11部分:气候试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 11:Climatic tests |
|||
GB/T 5095.1-1997 电子设备用机电元件 基本试验规程及测量方法 第1部分:总则(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuringmethods--Part 1:General |
|||
GB/T 5095.12-1997 电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering |
|||
GB/T 5095.2-1997 电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination,electrical continuity and contact resistance tests,insulationtests and voltage stress tests |
|||
GB/T 5095.4-1997 电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests |
|||
GB/T 5095.5-1997 电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components),static load tests(fixed components),endurance tests and overload tests |
|||
GB/T 5095.6-1997 电子设备用机电元件 基本试验规程及测量方法 第6部分:气候试验和锡焊试验(中英文版) Electromechanical components for electronic equipment--Basic testing proceduresand measuring methods--Part 6:Climatic tests and soldering tests |
|||
GB/T 5095.7-1997 电子设备用机电元件 基本试验规程及测量方法 第7部分:机械操作试验和密封性试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 7:Mechanical operating tests and sealing tests |
|||
GB/T 5095.8-1997 电子设备用机电元件 基本试验规程及测量方法 第8部分:连接器、接触件及引出端的机械试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8:Connector tests(mechanical)and mechanical tests on contacts and terminations |
|||
GB/T 5095.9-1997 电子设备用机电元件 基本试验规程及测量方法 第9部分:杂项试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9:Miscellaneous tests |
|||
GB/T 5095.15-1997 电子设备用机电元件 基本试验规程及测量方法 第15部分:接触件和引出端的机械试验 第八篇:试验15h接触件固定机构耐工具使用性(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application |
|||
GB/T 15479-1995 工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法(中英文版) Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments |
|||
GB/T 5441.10-1985 通信电缆试验方法 同轴对展开长度测量 正弦波法(中英文版) Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method |
|||
GB/T 5441.9-1985 通信电缆试验方法 工频条件下理想屏蔽系数试验(中英文版) Test methods for communication cable--Test for ideal screening factor measured at power frequency |
找到:144條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |