中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB 18279-2023 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes |
 |
|
|
|
GB/T 19212.1-2023 变压器、电抗器、电源装置及其组合的安全 第1部分：通用要求和试验（中英文版） Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests |
|
|
|
|
GB/T 43119-2023 自动驾驶封闭测试场地建设技术要求（中英文版） Technical requirements for the construction of closed test sites for autonomous driving |
|
|
|
|
GB/T 42663-2023 钢铁行业水足迹评价要求（中英文版） Water footprint assessment requirements for the steel industry |
|
|
|
|
GB/T 42803-2023 婴童用品 母婴室配套用品通用技术要求（中英文版） Baby and child products General technical requirements for accessories for mother and child room |
|
|
|
|
GB/T 18433-2023 航空货运保温集装箱热性能要求（中英文版） Thermal Performance Requirements for Air Freight Insulated Containers |
|
|
|
|
GB/T 42561-2023 信息技术 系统间远程通信和信息交换 实时以太网适配时间敏感网络技术要求（中英文版） Information technology - Telecommunications and information exchange between systems - Real-time Ethernet adapted to technical requirements for time-sensitive networks |
|
|
|
|
GB/T 41638.3-2023 塑料 生物基塑料的碳足迹和环境足迹 第3部分：过程碳足迹 量化要求与准则（中英文版） Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints |
|
|
|
|
GB/T 42545-2023 核电厂橡胶衬里工程腐蚀控制全生命周期通用要求（中英文版） General requirements for the whole life cycle of corrosion control of rubber lining engineering in nuclear power plants |
|
|
|
|
GB/T 42507-2023 从业人员信用档案建设与管理要求（中英文版） Requirements for the construction and management of employees' credit files |
|
|
|
|
GB/T 42412-2023 基于工业云平台的个性化定制技术要求（中英文版） Technical requirements for personalized customization based on the industrial cloud platform |
|
|
|
|
GB/T 42383.4-2023 智能制造 网络协同设计 第4部分：面向全生命周期设计要求（中英文版） Intelligent Manufacturing Network Collaborative Design Part 4: Design Requirements for the Whole Life Cycle |
|
|
|
|
GB/T 42125.14-2023 测量、控制和实验室用电气设备的安全要求 第14部分：实验室用分析和其他目的自动和半自动设备的特殊要求（中英文版） Safety requirements for electrical equipment for measurement, control and laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
|
|
|
|
GB/T 19510.209-2023 光源控制装置 第2-9部分：放电灯（荧光灯除外）用电磁控制装置的特殊要求（中英文版） Light source control devices Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (other than fluorescent lamps) |
|
|
|
|
GB/T 43629.1-2023 生物技术 核酸合成 第1部分：合成寡核苷酸的生产和质量控制要求（中英文版） Biotechnology Nucleic acid synthesis Part 1: Production and quality control requirements for synthetic oligonucleotides |
|
|
|
|
GB/T 19510.212-2023 光源控制装置 第2-12部分：放电灯（荧光灯除外）用直流或交流电子镇流器的特殊要求（中英文版） Light source control devices Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (other than fluorescent lamps) |
|
|
|
|
GB/T 37190-2023 管道腐蚀控制工程全生命周期 通用要求（中英文版） General requirements for the entire life cycle of pipeline corrosion control projects |
|
|
|
|
GB/T 33314-2023 腐蚀控制工程全生命周期 通用要求（中英文版） General requirements for the entire life cycle of corrosion control projects |
|
|
|
|
GB/T 10067.101-2023 电热和电磁处理装置基本技术条件 第101部分：真空电热和电磁处理装置的通用要求（中英文版） Basic technical conditions for electrothermal and electromagnetic treatment devices Part 101: General requirements for vacuum electrothermal and electromagnetic treatment devices |
|
|
|
|
GB/T 19510.201-2023 光源控制装置 第2-1部分: 启动装置(辉光启动器除外)的特殊要求（中英文版） Light source control devices Part 2-1: Special requirements for starting devices (other than glow starters) |
|
|
|
|
GB/T 43429-2023 人感染病原微生物与样本保藏通用要求（中英文版） General requirements for the preservation of pathogenic microorganisms and samples for human infections |
|
|
|
|
GB/T 27651-2023 防腐木材的使用分类和要求（中英文版） Classification and requirements for the use of anticorrosive wood |
|
|
|
|
GB/T 43371-2023 系留气球安全性通用要求（中英文版） General requirements for safety of tethered balloons |
|
|
|
|
GB/T 41529-2022 用于老年人生活辅助的智能家电系统 通用安全要求（中英文版） Smart home appliance systems for life assistance for the elderly General safety requirements |
|
|
|
|
GB/T 41527-2022 家用和类似用途服务机器人安全通用要求（中英文版） General requirements for the safety of domestic and similar service robots |
|
|
|
|
GB/T 41584-2022 压水堆核电厂装料前热态性能试验要求（中英文版） Requirements for thermal state performance test before fuel loading in pressurized water reactor nuclear power plant |
|
|
|
|
GB/T 7966-2022 声学 超声功率测量 辐射力天平法及其要求（中英文版） Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements |
|
|
|
|
GB/T 41311.1-2022 声学 描述船舶水下噪声的量及其测量方法 第1部分：用于比对目的的深水精密测量要求（中英文版） Acoustics - Describe the quantity of underwater noise from ships and methods of measurement - Part 1: Requirements for precision measurements in deep water for comparison purposes |
|
|
|
|
GB/T 41303-2022 塔式太阳能热发电站吸热器技术要求（中英文版） Technical requirements for heat absorbers in tower solar thermal power stations |
|
|
|
|
GB 9706.222-2022 医用电气设备 第2-22部分：外科、整形、治疗和诊断用激光设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment - Part 2-22: Particular requirements for the basic safety and essential performance of laser equipment for surgical, orthopedic, therapeutic and diagnostic use |
|
|
|
|
GB/T 42178-2022 空间站气闸舱进出货物接口要求（中英文版） Requirements for the interface of cargo entering and exiting the space station airlock |
|
|
|
|
GB/T 42145-2022 政府网站网页电子文件管理系统建设要求（中英文版） Requirements for the construction of government website webpage electronic document management system |
|
|
|
|
GB/T 14536.3-2022 电自动控制器 第3部分：电动机热保护器的特殊要求（中英文版） Electric automatic controllers - Part 3: Particular requirements for motor thermal protectors |
|
|
|
|
GB 9706.275-2022 医用电气设备 第2-75部分：光动力治疗和光动力诊断设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnostic equipment |
|
|
|
|
GB 9706.283-2022 医用电气设备 第2-83部分：家用光治疗设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of household phototherapy equipment |
|
|
|
|
GB 9706.290-2022 医用电气设备 第2-90部分：高流量呼吸治疗设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment - Part 2-90: Particular requirements for the basic safety and essential performance of high-flow respiratory therapy equipment |
|
|
|
|
GB/T 41761-2022 湿法脱硫系统耐蚀材料全生命周期技术要求（中英文版） Technical requirements for the whole life cycle of corrosion-resistant materials in wet desulfurization system |
|
|
|
|
GB/T 19668.7-2022 信息技术服务 监理 第7部分：监理工作量度量要求（中英文版） Information technology services—Supervision—Part 7: Requirements for the measurement of supervision workload |
|
|
|
|
GB/T 42063-2022 锐器伤害保护 要求与试验方法 一次性使用皮下注射针、介入导管导引针和血样采集针的锐器伤害保护装置（中英文版） Sharps injury protection requirements and test methods - Sharps injury protection devices for disposable hypodermic needles, interventional catheter guide needles and blood sample collection needles |
|
|
|
|
GB/T 23718.7-2022 机器状态监测与诊断 人员资格与人员评估的要求 第7部分：热成像（中英文版） Machine condition monitoring and diagnostics - Requirements for personnel qualification and assessment - Part 7: Thermal imaging |
|
|
|
|
GB/T 42053-2022 船舶与海洋技术 船用起重机 使用与维护要求（中英文版） Ships and marine technology - Requirements for the use and maintenance of marine cranes |
|
|
|
|
GB/T 32070-2022 土方机械 物体监测系统及其可视辅助装置 性能要求和试验（中英文版） Earth-moving machinery - Object monitoring systems and their visual aids - Performance requirements and tests |
|
|
|
|
GB 9706.229-2021 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators |
|
|
|
|
GB 40558-2021 固体散装货物海运安全技术要求（中英文版） The safety requirements for marine shipping solid bulk cargoes |
|
|
|
|
GB 9706.216-2021 医用电气设备 第2-16部分：血液透析、血液透析滤过和血液滤过设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment |
|
|
|
|
GB 9706.208-2021 医用电气设备 第2-8部分：能量为10kV至1MV 治疗X射线设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment –Part 2-8: Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV |
|
|
|
|
GB 9706.243-2021 医用电气设备 第2-43部分：介入操作X射线设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
|
|
|
|
GB 9706.265-2021 医用电气设备 第2-65部分：口内成像牙科X射线机的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
|
|
|
|
GB/T 40350-2021 家居用聚氯乙烯人造革通用技术要求（中英文版） General technical requirements for homeuse polyvinyl chloride artificial leather |
|
|
|
|
GB/T 4214.15-2021 家用和类似用途电器噪声测试方法 储热式室内加热器的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for electric thermal storage room heaters |
|
|
|
|
GB/T 4214.13-2021 家用和类似用途电器噪声测试方法 吸油烟机及其他烹饪烟气吸排装置的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for range hoods and other cooking fume extractors |
|
|
|
|
GB 9706.229-2021 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-29:Particular requirements for the basic safety and essential performance of radiotherapy simulators |
|
|
|
|
GB 9706.216-2021 医用电气设备 第2-16部分：血液透析、血液透析滤过和血液滤过设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment |
|
|
|
|
GB 9706.208-2021 医用电气设备 第2-8部分：能量为10kV至1MV 治疗X射线设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-8:Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV |
|
|
|
|
GB 40558-2021 固体散装货物海运安全技术要求（中英文版） The safety requirements for marine shipping solid bulk cargoes |
|
|
|
|
GB/T 22576.2-2021 医学实验室 质量和能力的要求 第2部分：临床血液学检验领域的要求（中英文版） Medical laboratories-Requirements for quality and competence- Part 2:Requirements in the field of clinical hematological examination |
|
|
|
|
GB/T 40133-2021 餐厨废油资源回收和深加工技术要求（中英文版） Technical requirements for recycling and further processing of waste cooking oil from restaurant |
|
|
|
|
GB/T 40199-2021 城市园林废弃物资源回收和深加工技术要求（中英文版） Technical requirements for resource recovery and further processing of urban garden waste |
|
|
|
|
GB/T 22576.4-2021 医学实验室 质量和能力的要求 第4部分：临床化学检验领域的要求（中英文版） Medical laboratories-Requirements for quality and competence- Part 4:Requirements in the field of clinical chemistry examination |
|
|
|
|
GB/T 22576.5-2021 医学实验室 质量和能力的要求 第5部分：临床免疫学检验领域的要求（中英文版） Medical laboratories-Requirements for quality and competence- Part 5:Requirements in the field of clinical immunology examination |
|
|
|
|
GB/T 22576.7-2021 医学实验室 质量和能力的要求 第7部分：输血医学领域的要求（中英文版） Medical laboratories—Requirements for quality and competence—Part 7：Requirements in the field of transfusion medicine |
|
|
|
|
GB/T 22576.3-2021 医学实验室 质量和能力的要求 第3部分：尿液检验领域的要求（中英文版） Medical laboratories-Requirements for quality and competence-Part 3:Requirements in the field of urine examination |
|
|
|
|
GB/T 22576.6-2021 医学实验室 质量和能力的要求 第6部分：临床微生物学检验领域的要求（中英文版） Medical laboratories—Requirements for quality and competence—Part 6: Requirements in the field of clinical microbiological examination |
|
|
|
|
GB/T 15000.7-2021 标准样品工作导则 第7部分：标准样品生产者能力的通用要求（中英文版） Directives for the work of reference materials—Part 7:General requirements for the competence of reference material producers |
|
|
|
|
GB/T 40089-2021 石油和天然气工业用钢丝绳 最低要求和验收条件（中英文版） Steel wire ropes for the petroleum and natural gas industries—Minimum requirements and terms of acceptance |
|
|
|
|
GB/T 16903-2021 标志用图形符号表示规则 公共信息图形符号的设计原则与要求（中英文版） Rules for the presentation of graphical symbols for use on signs -- Design principles and requirements for public information graphical symbols |
|
|
|
|
GB/T 12668.901-2021 调速电气传动系统 第9-1部分：电气传动系统、电机起动器、电力电子设备及其传动应用的生态设计 采用扩展产品法（EPA）和半解析模型（SAM）制定电气传动设备能效标准的一般要求（中英文版） Adjustable speed electrical power drive systems—Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications—General requirements for setting energy efficiency standards for power driven equipment using the |
|
|
|
|
GB/T 39802-2021 城镇供热保温材料技术条件（中英文版） Technical requirements for thermal insulation material of urban heat-supplying |
|
|
|
|
GB/T 39900-2021 道路交通信号控制系统通用技术要求（中英文版） General technical requirements for the road traffic signal control system |
|
|
|
|
GB/T 4214.8-2021 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求（中英文版） Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these |
|
|
|
|
GB/T 41006-2021 汽车用聚氨酯合成革通用技术条件（中英文版） General technical requirements for polyurethane synthetic leather used for vehicle |
|
|
|
|
GB 9706.213-2021 医用电气设备 第2-13部分：麻醉工作站的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-13: Particular requirements for the basics safety and essential performance of an anaesthetic workstation |
|
|
|
|
GB 9706.218-2021 医用电气设备 第2-18部分：内窥镜设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-18:Particular requirements for the basic safety and essential performance of endoscopic equipment |
|
|
|
|
GB 9706.236-2021 医用电气设备 第2-36部分：体外引发碎石设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy |
|
|
|
|
GB 9706.225-2021 医用电气设备 第2-25部分：心电图机的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
|
|
|
|
GB 9706.202-2021 医用电气设备 第2-2部分：高频手术设备及高频附件的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
|
|
|
|
GB 9706.224-2021 医用电气设备 第2-24部分：输液泵和输液控制器的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
|
|
|
|
GB/T 40890-2021 教学用玻璃仪器一般质量要求和试验方法（中英文版） General quality requirements and test methods for the teaching vitreous equipment |
|
|
|
|
GB 9706.226-2021 医用电气设备 第2-26部分：脑电图机的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs |
|
|
|
|
GB/T 40864-2021 柔性交流输电设备接入电网继电保护技术要求（中英文版） Technical requirements for relaying protection of flexible alternating current transmission equipment connecting to the system |
|
|
|
|
GB/T 40858-2021 太阳能光热发电站集热管通用要求与测试方法（中英文版） General requirements and test methods for receivers of solar thermal power plants |
|
|
|
|
GB 9706.219-2021 医用电气设备 第2-19部分：婴儿培养箱的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-19:Particular requirements for the basic safety and essential performance of infant incubators |
|
|
|
|
GB 9706.227-2021 医用电气设备 第2-27部分：心电监护设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
|
|
|
|
GB/T 40616-2021 村镇光伏发电站集群控制系统仿真测试技术要求（中英文版） Technical requirements for simulation test of control system functions of the rural photovoltaic power station cluster |
|
|
|
|
GB 9706.254-2020 医用电气设备 第2-54部分：X射线摄影和透视设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
|
|
|
|
GB 9706.263-2020 医用电气设备 第2-63部分: 口外成像牙科X射线机基本安全和基本性能专用要求（中英文版） Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
|
|
|
|
GB 9706.205-2020 医用电气设备 第2-5部分：超声理疗设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
|
|
|
|
GB/T 38930-2020 民用轻小型无人机系统抗风性要求及试验方法（中英文版） Requirements and test methods of the capability of wind resistance for civil small and light unmanned aircraft system |
|
|
|
|
GB/T 38864-2020 干部网络培训 课程共建共享通用要求（中英文版） Online training for leadership—General requirements for the co-construction and sharing of courses |
|
|
|
|
GB/T 38997-2020 轻小型多旋翼无人机飞行控制与导航系统通用要求（中英文版） General requirements for the flight control and navigation system of small and light multi-rotor unmanned aircraft |
|
|
|
|
GB/T 38985-2020 陶瓷液体色料性能技术要求（中英文版） The character requirements for ceramic liquid pigments |
|
|
|
|
GB/T 38996-2020 民用轻小型固定翼无人机飞行控制系统通用要求（中英文版） General requirements for the flight control system of civil small and light fixed wing unmanned aircraft |
|
|
|
|
GB 9706.203-2020 医用电气设备 第2-3部分：短波治疗设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
|
|
|
|
GB 9706.237-2020 医用电气设备 第2-37部分：超声诊断和监护设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
|
|
|
|
GB/T 2893.5-2020 图形符号 安全色和安全标志 第5部分：安全标志使用原则与要求（中英文版） Graphical symbols—Safety colours and safety signs—Part 5: Principles and requirements for the use of safety signs |
|
|
|
|
GB/T 38701-2020 供应链安全管理体系 对供应链安全管理体系审核认证机构的要求（中英文版） Security management systems for the supply chain—Requirements for bodies providing audit and certification of supply chain security management systems |
|
|
|
|
GB/T 12706.4-2020 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第4部分:额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)电力电缆附件试验要求（中英文版） Power cables with extruded insulation and their accessories for rated voltages from l kV (Um=1.2 kV) up to 35 kV(Um=40.5 kV)—Part 4:Test requirements on accessories for cables with rated voltages from 6 kV(Um=7.2 kV) up to 35 kV(Um=40.5 kV) |
|
|
|
|
GB/T 38678-2020 浅层地热能利用通用技术要求（中英文版） General technical requirements for shallow geothermal energy utilization |
|
|
|
|
GB/T 38702-2020 供应链安全管理体系 实施供应链安全、评估和计划的最佳实践 要求和指南（中英文版） Security management systems for the supply chain—Best practices for implementing supply chain security, assessments and plans—Requirements and guidance |
|
|
|
|
GB/T 38693-2020 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 热电式熄火保护装置（中英文版） Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Thermoelectric flame supervision controls |
|
|
|
|
GB/T 38595-2020 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 机械式温度控制装置（中英文版） Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Mechanical thermostats |
|
|
|
|
GB 9706.245-2020 医用电气设备 第2-45部分：乳腺X射线摄影设备和乳腺摄影立体定位装置的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-45: Particular requirements for the basic safety and essential performance of mammographie X-ray equipment and mammographie stereotactic devices |
|
|
|
|
GB 9706.244-2020 医用电气设备 第2-44部分：X射线计算机体层摄影设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-44:Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
|
|
|
|
GB 9706.228-2020 医用电气设备 第2-28部分：医用诊断X射线管组件的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
|
|
|
|
GB 9706.217-2020 医用电气设备 第2-17部分：自动控制式近距离治疗后装设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment |
|
|
|
|
GB 9706.211-2020 医用电气设备 第2-11部分：γ射束治疗设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment |
|
|
|
|
GB 9706.201-2020 医用电气设备 第2-1部分：能量为1MeV至50MeV电子加速器基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV |
|
|
|
|
GB/T 19212.24-2020 变压器、电抗器、电源装置及其组合的安全 第24部分：建筑工地用变压器和电源装置的特殊要求和试验（中英文版） Safety of transformers, reactors, power supply units and combinations thereof—Part 24：Particular requirements and test for transformers and power supply units for construction sites |
|
|
|
|
GB/T 19212.11-2020 变压器、电抗器、电源装置及其组合的安全 第11部分：高绝缘水平分离变压器和输出电压超过1 000 V的分离变压器的特殊要求和试验（中英文版） Safety of transformers, reactors, power supply units and combinations thereof—Part 11: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
|
|
|
|
GB/T 39260.2-2020 用例方法 第2部分：用例模板、参与方清单和需求清单的定义（中英文版） Use case methodology—Part 2：Definition of the templates for use cases,actor list and requirements list |
|
|
|
|
GB/T 39226-2020 磁约束聚变大电流变流系统集成测试要求（中英文版） Requirements on the integrated test for high power converter system of magnetic confinement fusion |
|
|
|
|
GB/T 32855.2-2020 先进自动化技术及其应用 制造业企业过程互操作性建立要求 第2部分：评价企业互操作性成熟度模型（中英文版） Advanced automation technologies and their applications—Requirements for establishing manufacturing enterprise process interoperability—Part 2: Maturity model for assessing enterprise interoperability |
|
|
|
|
GB/T 19703-2020 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求（中英文版） In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation |
|
|
|
|
GB/T 39332-2020 高精度齿轮抗疲劳制造通用技术要求（中英文版） General requirements for the anti-fatigue manufacturing of precision gears |
|
|
|
|
GB/T 22380.2-2019 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers |
|
|
|
|
GB/T 37325-2019 船舶生产企业能源综合管控通用要求（中英文版） General requirements of energy consumption synthetic control for shipbuilding enterprises |
|
|
|
|
GB/T 37472-2019 潜水器母船升沉补偿系统通用要求（中英文版） General requirements for heave compensation system of submersible mothership |
|
|
|
|
GB/T 37582-2019 海洋工程装备腐蚀控制工程全生命周期要求（中英文版） Requirements for corrosion control engineering in the life cycle of the marine engineering equipment |
|
|
|
|
GB/T 37976-2019 物联网 智慧酒店应用 平台接口通用技术要求（中英文版） Internet of things—Smart hotel application—General technical requirements of the platform interface |
|
|
|
|
GB/T 38023-2019 机械手表机心零部件的精饰要求（中英文版） Finishing requirements for parts and assemblies of the mechanical watch movements |
|
|
|
|
GB/T 22380.3-2019 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves |
|
|
|
|
GB/T 27025-2019 检测和校准实验室能力的通用要求（中英文版） General requirements for the competence of testing and calibration laboratories |
|
|
|
|
GB/T 22380.2-2019 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers |
|
|
|
|
GB/T 22380.3-2019 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves |
|
|
|
|
GB/T 27025-2019 检测和校准实验室能力的通用要求（中英文版） General requirements for the competence of testing and calibration laboratories |
|
|
|
|
GB/T 37985-2019 机动车电子标识密钥管理系统技术要求（中英文版） Technical requirements for key management system for the elictronic identification of motor vehicle |
|
|
|
|
GB/T 36302-2018 电子商务信用 自营型网络零售平台信用管理体系要求（中英文版） E-commerce credit—Requirements of integrity management system for the seller-managed retailing transaction platform |
|
|
|
|
GB/T 9816.3-2018 热熔断体 第3部分：易融合金感温型热熔断体的特殊要求（中英文版） Thermal-links—Part 3：Particular requirements for fusible-alloy-temperature-sensing thermal-links |
|
|
|
|
GB/T 35010.6-2018 半导体芯片产品 第6部分：热仿真要求（中英文版） Semiconductor die products—Part 6: Requirements for concerning thermal simulation |
|
|
|
|
GB/T 13145-2018 冷藏集装箱堆场技术管理要求（中英文版） Specification and management requirements of the stacking yard for refrigerated containers |
|
|
|
|
GB/T 36116-2018 村镇光伏发电站集群控制系统功能要求（中英文版） Requirements for the control system function of the rural photovoltaic power station cluster |
|
|
|
|
GB/T 36574-2018 产业园区废气综合利用原则和要求（中英文版） Principles and requirements for the comprehensive utilization of exhaust gases in industrial park |
|
|
|
|
GB/T 36304-2018 电子商务信用 第三方网络零售平台信用管理体系要求（中英文版） E-commerce credit—Requirements of integrity management system for the 3rd part online retailing platform |
|
|
|
|
GB/T 37168-2018 建筑施工机械与设备-混凝土和砂浆制备机械与设备安全要求（中英文版） Building construction machinery and equipment－Machinery and plants for the preparation of concrete and mortar safety requirements |
|
|
|
|
GB/Z 21099.6-2018 过程控制用功能块（FB）和电子设备描述语言（EDDL） 第6部分：满足现场设备工程工具对集成现场总线设备的需求（中英文版） Function blocks(FB) for process control and electronic device description language(EDDL)—Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices |
|
|
|
|
GB/T 36674-2018 公共机构能耗监控系统通用技术要求（中英文版） General technical requirements for the energy construction monitoring system in public institutions |
|
|
|
|
GB/T 37214-2018 陶瓷外墙砖通用技术要求（中英文版） The requirements for external ceramic tiles |
|
|
|
|
GB/T 37081-2018 接入网技术要求-10Gbit/s-以太网无源光网络(10G-EPON)（中英文版） Technical requirements for access network—10Gbit/s ethernet passive optical network (10G-EPON) |
|
|
|
|
GB/T 37083-2018 接入网技术要求-EPON系统互通性（中英文版） Technical requirements for access network—Interoperability of ethernet passive optical network（EPON）system |
|
|
|
|
GB/T 8196-2018 机械安全-防护装置-固定式和活动式防护装置的设计与制造一般要求（中英文版） Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards |
|
|
|
|
GB/T 37278-2018 建立非疫产地和非疫生产点的要求（中英文版） Requirements for the establishment of pest free places of production and pest free production sites |
|
|
|
|
GB/T 9816.2-2018 热熔断体 第2部分：有机物感温型热熔断体的特殊要求（中英文版） Thermal-links—Part 2：Particular requirements for organic-temperature-sensing thermal-links |
|
|
|
|
GB/T 34846-2017 LED道路/隧道照明专用模块规格和接口技术要求（中英文版） Classification and interface technical requirements of the specialized modules for LED road/tunnel lighting |
|
|
|
|
GB/T 12655-2017 卷烟纸基本性能要求（中英文版） The basic performance requirements of cigarette paper |
|
|
|
|
GB/T 17993-2017 汽车综合性能检验机构能力的通用要求（中英文版） General requirements for the competence of automotive multiple-function inspection agency |
|
|
|
|
GB 13094-2017 客车结构安全要求（中英文版） The safety requirements for bus construction |
|
|
|
|
GB/T 1303.5-2017 电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板（中英文版） Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins |
|
|
|
|
GB/T 34578-2017 火力发电厂热工仪表与执行装置运行维护与试验技术规程（中英文版） Technical requirements for operation,maintenance and test of instrumentation and actuating equipment in thermal power plant |
|
|
|
|
GB/T 7676.7-2017 直接作用模拟指示电测量仪表及其附件 第7部分：多功能仪表的特殊要求（中英文版） Direct acting indicating analogue electrical measuring instruments and their accessories—Part 7：Special requirements for multi-function instruments |
|
|
|
|
GB/T 22517.4-2017 体育场地使用要求及检验方法 第4部分：合成面层篮球场地（中英文版） Technical requirements and test methods for sports fields—Part 4: Synthetic surface for basketball |
|
| 找到:435條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
