中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 43087-2023
微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法(中英文版)
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-sectional images of layered materials
  GB/T 42553-2023
电声学 确定声级计自由场响应修正值的方法(中英文版)
Electroacoustics - Method for determining free-field response corrections for sound level meters
  GB/T 43289-2023
塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法(中英文版)
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions.
  GB/T 12966-2022
铝及铝合金电导率涡流测试方法(中英文版)
The methods for determining aluminium and aluminium alloys conductivity using eddy current
  GB/T 32877-2022
变频器供电交流电动机确定损耗和效率的特定试验方法(中英文版)
Specific test methods for determining losses and efficiency of frequency converter-fed a.c. motors
  GB/T 40407-2021
硅酸盐水泥熟料矿相X射线衍射分析方法(中英文版)
X-ray powder diffraction analysis method for determining the phases in portland cement clinker
  GB/T 40403-2021
金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法(中英文版)
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
  GB/T 40294-2021
确定电励磁同步电机参数的试验方法(中英文版)
Methods for determining electrically excited synchronous machine quantities from tests
  GB/T 40260-2021
高分子膜材料气体渗透性能测试方法(中英文版)
Test method for determining gas permeability of polymer membrane materials
  GB/T 39828-2021
陶瓷厚涂层的高温弹性模量试验方法(中英文版)
Test method for determining elastic modulus of thick ceramic coating at elevated temperature
  GB/T 41060-2021
水泥胶砂抗冻性试验方法(中英文版)
Test method for determining frost resistance of cement mortar
  GB/T 4214.10-2021
家用和类似用途电器噪声测试方法 确定和检验噪声明示值的程序(中英文版)
Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values
  GB/T 38498-2020
消毒剂金属腐蚀性评价方法(中英文版)
Evaluation method for determining metal corrosion of disinfectant
  GB/T 39528-2020
建筑幕墙面板抗地震脱落检测方法(中英文版)
Test method for determining the seismic drift causing the panels fallout from curtain wall system
  GB/T 39685-2020
陶瓷覆层结合强度试验方法(中英文版)
Test method for determining bonding strength of ceramic coatings
  GB/T 39688-2020
陶瓷涂层密度的测试方法(中英文版)
Testing method for determining density of ceramic coatings
  GB/T 39686-2020
陶瓷厚涂层的弹性模量与强度试验方法(中英文版)
Test method for determining elastic modulus and strength of thick ceramic coatings
  GB/T 39427-2020
无损检测 工业Ir192伽玛射线源尺寸测定方法(中英文版)
Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source
  GB/T 39421-2020
水泥浆静胶凝强度测定方法(中英文版)
Methods for determining the static gel strength of cement formulations
  GB/T 1741-2020
漆膜耐霉菌性测定法(中英文版)
Test method for determining the resistance of paints film to mold
  GB/T 37983-2019
晶体材料X射线衍射仪旋转定向测试方法(中英文版)
Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation
  GB/T 37977.23-2019
静电学 第2-3部分:防静电固体平面材料电阻和电阻率的测试方法(中英文版)
Electrostatics—Part 2-3:Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
  GB/T 1557-2018
硅晶体中间隙氧含量的红外吸收测量方法(中英文版)
Test method for determining interstitial oxygen content in silicon by infrared absorption
  GB/T 36260.2-2018
检出能力-第2部分:线性校准情形检出限的确定方法(中英文版)
Detection ability - Part 2: Method for determining the detection limit of linear calibration
  GB/T 25442-2018
旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版)
Standard methods for determining losses and efficiency of rotation electrical machines from tests(excluding machines for traction vehicles)
  GB/T 35804-2018
硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法(中英文版)
Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Test methods for determining the ozone concentration in laboratory test chambers
  GB/T 34862-2017
确定三相低压笼型感应电动机等值电路参数的试验方法(中英文版)
Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
  GB/T 34861-2017
确定大电机各项损耗的专用试验方法(中英文版)
Specific methods for determining separate losses of large machines from tests
  GB/T 34338-2017
真空玻璃用熔封玻璃力学性能试验方法(中英文版)
Test methods for determining mechanical properties of sealing glass for vacuum glazing
  GB/T 34641-2017
无损检测 直接热中子照相检测的像质测定方法(中英文版)
Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination
  GB/T 34210-2017
蓝宝石单晶晶向测定方法(中英文版)
Test method for determining the orientation of sapphire single crystal
  GB/T 35392-2017
无损检测 电导率电磁(涡流)测定方法(中英文版)
Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method
  GB/T 35214-2017
无机水载型木材防腐剂固着时间的确定方法(中英文版)
Standard method for determining fixation times of inorganic waterborne wood preservatives
  GB/T 33298-2016
柴油十六烷值的测定 风量调节法(中英文版)
Standard test method for determining cetane number of diesel fuels—Airflow regulation
  GB/T 33210-2016
无损检测 残余应力的电磁检测方法(中英文版)
Non-destructive testing—Test method for determining residual stresses by electromagnetic technology
  GB/T 33043-2016
人造板甲醛释放量测定大气候箱法(中英文版)
Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber
  GB/T 32877-2016
变频器供电交流感应电动机确定损耗和效率的特定试验方法(中英文版)
Specific test methods for determining losses and efficiency of converter-fed AC induction motors
  GB/T 31984-2015
光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法(TGA)(中英文版)
Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA)
  GB/T 27508-2011
70mm、35mm和16mm电影放映画面跳动和晃动等级测定方法(中英文版)
Method for determining the degree of jump and weave in 70mm、35mm and 16mm motion-picture projected images
  GB/T 26140-2010
无损检测 测量残余应力的中子衍射方法(中英文版)
Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction
  GB/T 25962-2010
高速条件下汽车轮毂轴承润滑脂漏失量测定法(中英文版)
Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions
  GB/T 25442-2010
旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版)
Standard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles)
  GB/T 1033.3-2010
塑料 非泡沫塑料密度的测定 第3部分:气体比重瓶法(中英文版)
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
  GB/T 1033.2-2010
塑料 非泡沫塑料密度的测定 第2部分:密度梯度柱法(中英文版)
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
  GB/T 23561.16-2010
煤和岩石物理力学性质测定方法 第16部分:岩石耐崩解性指数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining slake durability index of rock
  GB/T 23561.15-2010
煤和岩石物理力学性质测定方法 第15部分:岩石膨胀应力测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 15: Method for determining the swelling stress of rock
  GB/T 23561.14-2010
煤和岩石物理力学性质测定方法 第14部分:岩石膨胀率测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 14: Method for determining the swelling ratio of rock
  GB/T 23561.13-2010
煤和岩石物理力学性质测定方法 第13部分:煤和岩石点载荷强度指数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 13: Methods for determining point load strength index of coal and rock
  GB/T 23561.12-2010
煤和岩石物理力学性质测定方法 第12部分:煤的坚固性系数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 12: Method for determining coal hardiness coefficient
  GB/T 23561.11-2010
煤和岩石物理力学性质测定方法 第11部分:煤和岩石抗剪强度测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 11: Methods for determining shear strength of coal and rock
  GB/T 23561.10-2010
煤和岩石物理力学性质测定方法 第10部分:煤和岩石抗拉强度测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 10: Methods for determining tensile strength of coal and rock
  GB 12476.10-2010
可燃性粉尘环境用电气设备 第10部分:试验方法 粉尘与空气混合物最小点燃能量的测定方法(中英文版)
Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures
  GB 12476.9-2010
可燃性粉尘环境用电气设备 第9部分:试验方法 粉尘层电阻率的测定方法(中英文版)
Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers
  GB 12476.8-2010
可燃性粉尘环境用电气设备 第8部分: 试验方法 确定粉尘最低点燃温度的方法(中英文版)
Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust
  GB/T 9858-2009
片基与胶片耐折度的测定方法(中英文版)
Method for determining the folding endurance of photographic film and film base
  GB/T 12683-2009
片基与胶片拉伸性能的测定方法(中英文版)
Method for determining the tensile properties of photographic film and film base
  GB/T 1555-2009
半导体单晶晶向测定方法(中英文版)
Testing methods for determining the orientation of a semiconductor single crystal
  GB/T 24127-2009
塑料抗藻性能试验方法(中英文版)
Testing method for determining algal resistance of plastics
  GB/T 23561.4-2009
煤和岩石物理力学性质测定方法 第4部分:煤和岩石孔隙率计算方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock
  GB/T 23561.1-2009
煤和岩石物理力学性质测定方法 第1部分:采样一般规定(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 1: General requirements for sampling
  GB/T 23561.3-2009
煤和岩石物理力学性质测定方法 第3部分:煤和岩石块体密度测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock
  GB/T 23561.5-2009
煤和岩石物理力学性质测定方法 第5部分:煤和岩石吸水性测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock
  GB/T 23561.6-2009
煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 6: Methods for determining the moisture content of coal and rock
  GB/T 23561.7-2009
煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient
  GB/T 23561.8-2009
煤和岩石物理力学性质测定方法 第8部分:煤和岩石变形参数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 8: Methods for determining the deformation parameters of coal and rock
  GB/T 23561.9-2009
煤和岩石物理力学性质测定方法 第9部分:煤和岩石三轴强度及变形参数测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 9: Methods for determining the triaxial strength and deformation parameters of coal and rock
  GB/T 23561.2-2009
煤和岩石物理力学性质测定方法 第2部分:煤和岩石真密度测定方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 2: Methods for determining the true density of coal and rock
  GB/T 22689-2008
测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法(中英文版)
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
  GB/T 9861-2008
成像材料 照相胶片和相纸 照相乳剂湿抗划伤的测量方法(中英文版)
Imaging materials - Photographic film and papers - Method for determining the resistance of photographic emulsions to wet abrasion
  GB/T 13332-2008
土方机械 液压挖掘机和挖掘装载机 挖掘力的测定方法(中英文版)
Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces
  GB/T 15247-2008
微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法(中英文版)
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method
  GB/T 13305-2008
不锈钢中α-相面积含量金相测定法(中英文版)
Micrographic method for determining area content of the α-phases in stainless steels
  GB/T 1033.1-2008
塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法(中英文版)
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
  GB/T 16935.5-2008
低压系统内设备的绝缘配合 第5部分:不超过2mm的电气间隙和爬电距离的确定方法(中英文版)
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2mm
  GB/T 749-2008
水泥抗硫酸盐侵蚀试验方法(中英文版)
Test method for determining capability of resisting sulfate corrode of cement
  GB/T 2951.11-2008
电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
  GB/T 2951.13-2008
电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版)
Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test
  GB/T 12966-2008
铝合金电导率涡流测试方法(中英文版)
The method for determining aluminum alloys conductivity using eddy current
  GB/T 21970-2008
水质 组胺等五种生物胺的测定 高效液相色谱法(中英文版)
Water quality - Determiniation of putrescine,cadaverine, spermidine,spermine and histamine - High performance liquid chromatography method
  GB/T 10628-2008
气体分析 校准混合气组成的测定和校验 比较法(中英文版)
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
  GB/T 21865-2008
用半自动和自动图象分析法测量平均粒度的标准测试方法(中英文版)
Standard test methods for determining average grain size using semiautomatic and automatic image analysis
  GB/T 5018-2008
润滑脂防腐蚀性试验法(中英文版)
Standard test method for determining corrosion preventive properties of lubricating greases
  GB/T 21353-2008
漆膜抗藻性测定法(中英文版)
Test method for determining the resistance of paint film to algae
  GB/T 1741-2007
漆膜耐霉菌性测定法(中英文版)
Test method for determining the resistance of paints film to mold
  GB/T 20671.11-2006
非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi
  GB/T 20137-2006
三相笼型异步电动机损耗和效率的确定方法(中英文版)
Method for determining losses and efficiency of three-phase cage induction motors
  GB/T 20102-2006
玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法(中英文版)
Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution
  GB/T 755.2-2003
旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版)
Methods for determininglosses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
  GB/T 12162.1-2000
用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法(中英文版)
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods
  GB/T 18006.2-1999
一次性可降解餐饮具降解性能试验方法(中英文版)
Test method for determining the degradability of single use and degradable lunch container and drinking set
  GB/T 17631-1998
土工布及其有关产品 抗氧化性能的试验方法(中英文版)
Geotextiles and geotextile-related products--Test method for determining the resistance to oxidation
  GB/T 17632-1998
土工布及其有关产品 抗酸、碱液性能的试验方法(中英文版)
Geotextiles and geotextile-related products--Test method for determining the resistance to liquids of acids and bases
  GB/T 15457-1995
胶片与片基润滑度测定方法(中英文版)
Method for determining lubrication of photographic film and film base
  GB/T 15059-1994
片基膨胀率和收缩率的测定方法(中英文版)
Method for determining the water expansion and shrinkage of photographic film base
  GB/T 14573.4-1993
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第四部分:成批机器标牌值的确定和检验方法(中英文版)
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 4:Methods for stated values for batches of machines
  GB/T 14573.3-1993
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第三部分:成批机器标牌值的确定和检验简易(过渡)法(中英文版)
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 3:Simple (transition) method for determining and verifying labelled values for batches of machines
  GB/T 14573.2-1993
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第二部分:单台机器标牌值的确定和检验方法(中英文版)
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 2:Methods for stated values for individual machines
  GB/T 14573.1-1993
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第一部分:概述与定义(中英文版)
Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 1:General considerations and definitions
  GB/T 12373-1990
居住区大气中气态污染物液体吸收法的标准采样装置(中英文版)
Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
  GB/T 9863-1988
彩色反转照相胶片感光度测定方法(中英文版)
Method for determining the speed of colour reversal camera films
  GB/T 9862-1988
黑白航空照相胶片感光度和平均斜率测定方法(中英文版)
Method for determining the speed and average gradient of black-and-white aerial camera films
  GB/T 6843-1986
感光材料涂层熔点测定方法(中英文版)
Method for determining the coating melting point of photographic materials

找到:102條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1