中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 42125.14-2023 测量、控制和实验室用电气设备的安全要求 第14部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
|||
GB/Z 43280-2023 医学实验室 测量不确定度评定指南(中英文版) Medical Laboratory Measurement Uncertainty Assessment Guide |
|||
GB/T 42125.19-2022 测量、控制和实验室用电气设备的安全要求 第19部分:电动控制阀门执行器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves |
|||
GB/T 21919-2022 检验医学 运行参考测量程序的校准实验室的能力要求(中英文版) Laboratory medicine - Competence requirements for calibration laboratories operating reference measurement procedures |
|||
GB/T 42125.10-2022 测量、控制和实验室用电气设备的安全要求 第10部分:绝缘电阻测量和介电强度试验设备的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric strength test equipment |
|||
GB/T 42020-2022 实验室电源特性的测量规范(中英文版) Specifications for measurement of laboratory power supply characteristics |
|||
GB/T 18268.32-2022 测量、控制和实验室用的电设备 电磁兼容性要求 第32部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 特定电磁环境的工业应用(中英文版) Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu |
|||
GB/T 18268.31-2022 测量、控制和实验室用的电设备 电磁兼容性要求 第31部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 一般工业应用(中英文版) Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera |
|||
GB/T 8421-2020 农业轮式拖拉机 驾驶员座椅 传递振动的实验室测量(中英文版) Agricultural wheeled tractors—Operator's seat—Laboratory measurement of transmitted vibration |
|||
GB 4793.4-2019 测量、控制和实验室用电气设备的安全要求 第4部分:用于处理医用材料的灭菌器和清洗消毒器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement,control and laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
|||
GB/T 17213.14-2018 工业过程控制阀 第8-2部分:噪声的考虑 实验室内测量液动流流经控制阀产生的噪声(中英文版) Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves |
|||
GB/T 20441.2-2018 电声学 测量传声器 第2部分:采用互易技术对实验室标准传声器声压校准的原级方法(中英文版) Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique |
|||
GB/T 22159.5-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分:弹性支撑件低频平动动刚度的驱动点测量方法(中英文版) Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
|||
GB/T 22159.4-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第4部分:弹性非支撑件平动动刚度(中英文版) Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
|||
GB/T 19889.18-2017 声学 建筑和建筑构件隔声测量 第18部分:建筑构件雨噪声隔声的实验室测量(中英文版) Acoustics—Measurement of sound insulation in buildings and of building elements—Part 18: Laboratory measurement of sound generated by rainfall on building elements |
|||
GB/T 17213.8-2015 工业过程控制阀 第8-1部分:噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声(中英文版) Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves |
|||
GB/T 32241-2015 植物保护机械 喷雾飘移的实验室测量方法 风洞试验(中英文版) Equipment for crop protection—Methods for the laboratory measurement of spray drift—Wind tunnels |
|||
GB/T 31014-2014 声学 水声目标强度测量实验室方法(中英文版) Acoustics―Laboratory methods of underwater target strength measurement |
|||
GB/T 31004.3-2014 声学 建筑和建筑构件隔声声强法测量 第3部分:低频段的实验室测量(中英文版) Acoustics―Measurement of sound insulation in buildings and of building elements using sound intensity―Part 3: Laboratory measurements at low frequencies |
|||
GB/T 31004.1-2014 声学 建筑和建筑构件隔声声强法测量 第1部分:实验室测量(中英文版) Acoustics―Measurement of sound insulation in buildings and of building elements using sound intensity―Part 1: Laboratory measurements |
|||
GB/Z 30993-2014 测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式(中英文版) Safety requirements for electrical equipment for measurement, control, and laboratory use―Conformity verification report for GB 4793.1-2007 |
|||
GB/Z 30249-2013 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series |
|||
GB 4793.9-2013 测量、控制和实验室用电气设备的安全要求 第9部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use―Part 9: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
|||
GB/T 19277.2-2013 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量(中英文版) Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test |
|||
GB/T 22159.2-2012 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分:弹性支撑件平动动刚度的直接测量方法(中英文版) Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
|||
GB/T 22159.1-2012 声学与振动 弹性元件振动-声传递特性实验室测量方法 第1部分:原理与指南(中英文版) Acoustics and vibration-Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1 : Principles and guidelines |
|||
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
|||
GB/T 18268.22-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第22部分:特殊要求 低压配电系统用便携式试验、测量和监控设备的试验配置、工作条件和性能判据(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 22: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low |
|||
GB/T 18268.1-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第1部分:通用要求(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
|||
GB/T 18268.25-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第25部分:特殊要求 接口符合IEC61784-1, CP3/2的现场装置的试验配置、工作条件和性能判据(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 25: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/ |
|||
GB/T 18268.21-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第21部分:特殊要求 无电磁兼容防护场合用敏感性试验和测量设备的试验配置、工作条件和性能判据(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 21: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected |
|||
GB/T 18268.24-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第24部分:特殊要求 符合IEC 61557-8的绝缘监控装置和符合IEC 61557-9的绝缘故障定位设备的试验配置、工作条件和性能判据(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 24: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and fo |
|||
GB/T 18268.26-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第26部分:特殊要求 体外诊断(IVD)医疗设备(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 26: Particular requirements - In vitro diagnostic (IVD) medical equipment |
|||
GB/T 18268.23-2010 测量、控制和实验室用的电设备 电磁兼容性要求 第23部分:特殊要求 带集成或远程信号调理变送器的试验配置、工作条件和性能判据(中英文版) Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 23: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
|||
GB/T 25516-2010 声学 管道消声器和风道末端单元的实验室测量方法 插入损失、气流噪声和全压损失(中英文版) Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units loss, fiow noise and total pressure loss |
|||
GB/T 20441.3-2010 电声学 测量传声器 第3部分:采用互易技术对实验室标准传声器的自由场校准的原级方法(中英文版) Electroacoustics - Measurement microphone - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
|||
GB/T 20441.1-2010 电声学 测量传声器 第1部分:实验室标准传声器规范(中英文版) Electroacoustics - Measurement microphones - Part 1: Specifications for laboratory standard microphones |
|||
GB 4793.7-2008 测量、控制和实验室用电气设备的安全要求 第7部分:实验室用离心机的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 7: Particular requirements for laboratory centrifuges |
|||
GB 4793.6-2008 测量、控制和实验室用电气设备的安全要求 第6部分:实验室用材料加热设备的特殊要求(中英文版) Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials |
|||
GB 4793.5-2008 测量、控制和实验室用电气设备的安全要求 第5部分:电工测量和试验用手持探头组件的安全要求(中英文版) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 5: Safety requirements for hand-held probe assemblies for electrical measurement and test |
|||
GB 4793.3-2008 测量、控制和实验室用电气设备的安全要求 第3部分:实验室用混合和搅拌设备的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Particular requirements for laboratory equipment for mixing and stirring |
|||
GB 4793.2-2008 测量、控制和实验室用电气设备的安全要求 第2部分:电工测量和试验用手持和手操电流传感器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2: Particular requirements for hand-held and hand-manipulated cruuent sensors for electrical test and measurement |
|||
GB/T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分:弹性支撑件平动动刚度的间接测量方法(中英文版) Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|||
GB/T 21919-2008 检验医学 参考测量实验室的要求(中英文版) Laboratory medicine - Requirements for reference measurement laboratories |
|||
GB 4793.8-2008 测量、控制和试验室用电气设备的安全要求 第2-042部分:使用有毒气体处理医用材料及供试验室用的压力灭菌器和灭菌器的专用要求(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials,and for laboratory processes |
|||
GB 4793.1-2007 测量、控制和实验室用电气设备的安全要求 第1部分:通用要求(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 1: General requirements |
|||
GB/T 20468-2006 临床实验室定量测定室内质量控制指南(中英文版) Guideline for internal quality control for quantitative measurements in clinical laboratory |
|||
GB/T 19889.8-2006 声学 建筑和建筑构件隔声测量 第8部分:重质标准楼板覆面层撞击声改善量的实验室测量(中英文版) Acoustics―Measurement of sound insulation in buildings and of building elements―Part 8 :Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
|||
GB/T 19889.10-2006 声学 建筑和建筑构件隔声测量 第10部分: 小建筑构件空气声隔声的实验室测量(中英文版) Acoustics―Measurement of sound insulation in buildings and of building elements―Part 10:Laboratory measurements of airborne sound insulation of small building elements |
|||
GB/T 19889.6-2005 声学 建筑和建筑构件隔声测量 第6部分:楼板撞击声隔声的实验室测量(中英文版) Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:Laboratory measurements of impact sound insulation of floors |
|||
GB/T 19889.3-2005 声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量(中英文版) Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements |
|||
GB/T 19889.1-2005 声学 建筑和建筑构件隔声测量 第1部分:侧向传声受抑制的实验室测试 设施要求(中英文版) Acoustics-Measurement of sound insulation in buildings and of building elements-Part 1:Requirements for laboratory test facilities with suppressed flanking transmission |
|||
GB/T 19513-2004 声学 规定实验室条件下办公室屏障声衰减的测量(中英文版) Acoustics--Measurement ofoffice screen sound attenuation under specific laboratory conditions |
|||
GB/T 8940.2-2002 纸浆亮度(白度)试样的制备(中英文版) Pulp--Preparation of laboratory sheets for the measurement of brightness |
|||
GB/T 18699.1-2002 声学 隔声罩的隔声性能测定 第1部分:实验室条件下测量(标示用)(中英文版) Acoustics--Determination of sound insulation performances of enclosures--Part 1:Measurements under laboratory conditions (for declaration purposes) |
|||
GB 4793.4-2001 测量、控制及实验室用电气设备的安全 实验室用处理医用材料的蒸压器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement,control and laboratory use--Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process |
|||
GB/T 8421-2000 农业轮式拖拉机 驾驶座传递振动的试验室测量与限值(中英文版) Laboratory measurement and limits of operator’s seat transmitted vibration for agricultural wheeled tractors |
|||
GB/T 17213.8-1998 工业过程控制阀 第8部分:噪声的考虑 第1节:实验室内测量空气动力流流经控制阀产生的噪声(中英文版) Industrial-process control valves--Part 8:Noise considerations--Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves |
|||
GB/T 16405-1996 声学 管道消声器无气流状态下插入损失测量 实验室简易法(中英文版) Acoustics--Measurement of insertion loss of ducted silencers without flow--Laboratory survey method |
找到:59條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |