中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43073-2023 气动 测量排气消声器声压级的试验方法(中英文版) Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers |
|||
GB/T 3251-2023 铝及铝合金产品压缩试验方法(中英文版) Compression test methods for aluminum and aluminum alloy products |
|||
GB/T 29918-2023 稀土系储氢合金 压力-组成等温线(PCI)的测试方法(中英文版) Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys |
|||
GB/T 42655-2023 连续纤维增强陶瓷基复合材料高温压缩性能试验方法(中英文版) Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites |
|||
GB/T 42910-2023 无机胶粘剂高温压缩剪切强度试验方法(中英文版) Test method for high temperature compression shear strength of inorganic adhesives |
|||
GB/T 42900-2023 金属材料 高应变速率高温压缩试验方法(中英文版) High strain rate and high temperature compression test method for metallic materials |
|||
GB/T 42610-2023 高压氢气瓶塑料内胆和氢气相容性试验方法(中英文版) Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder |
|||
GB/T 42191-2023 MEMS压阻式压力敏感器件性能试验方法(中英文版) MEMS piezoresistive pressure sensitive device performance test method |
|||
GB/T 43549-2023 鞋类 鞋垫试验方法 静态压缩变形(中英文版) Footwear - Test methods for insoles - Static compression deformation |
|||
GB/T 1964-2023 多孔陶瓷 室温压缩强度试验方法(中英文版) Porous ceramics - Test method for compressive strength at room temperature |
|||
GB/T 1927.11-2022 无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain |
|||
GB/Z 41506-2022 液压传动 金属承压壳体的疲劳压力试验 评价方法(中英文版) Hydraulic transmission - Fatigue pressure test for metal pressure shells - Evaluation method |
|||
GB/T 1927.13-2022 无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定(中英文版) Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity |
|||
GB/T 1453-2022 夹层结构或芯子平压性能试验方法(中英文版) Test method for flat compressive properties of sandwich structures or cores |
|||
GB/T 41955-2022 聚合物基复合材料多向层合板无开孔压缩试验方法(中英文版) Non-opening compression test method for multidirectional laminates of polymer matrix composites |
|||
GB/T 13477.23-2022 建筑密封材料试验方法 第23部分:人工加速气候老化下拉伸-压缩循环后耐久性的测定(中英文版) Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering |
|||
GB/T 12085.23-2022 光学和光子学 环境试验方法 第23部分:低压与低温、大气温度、高温或湿热综合试验(中英文版) Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat |
|||
GB/T 1038.2-2022 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分:等压法(中英文版) Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method |
|||
GB/T 1038.1-2022 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分:差压法(中英文版) Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method |
|||
GB/T 21239-2022 纤维增强塑料层合板冲击后压缩性能试验方法(中英文版) Test method for compressive properties of fiber reinforced plastic laminates after impact |
|||
GB/T 41872-2022 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法(中英文版) Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method |
|||
GB/T 15623.3-2022 液压传动 电调制液压控制阀 第3部分:压力控制阀试验方法(中英文版) Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves |
|||
GB/T 42057-2022 潜水器及其承压设备压力试验方法(中英文版) Pressure test methods for submersibles and their pressure equipment |
|||
GB/T 41753-2022 密封胶人工气候老化下拉压循环耐久性试验方法(中英文版) Test method for artificial weathering pull-down compression cycle durability of sealants |
|||
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版) Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|||
GB/T 40406-2021 炭素材料压缩静态弹性模量和泊松比测定方法(中英文版) Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression |
|||
GB/T 1454-2021 夹层结构侧压性能试验方法(中英文版) Test method for edgewise compressive properties of sandwich constructions |
|||
GB/T 39794.1-2021 金属屋面抗风掀性能检测方法 第1部分:静态压力法(中英文版) Test method for wind uplift resistance of metal roof -- Part 1: Static pressure method |
|||
GB/T 39748.7-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分:称重法测定压力作用下的吸液量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure |
|||
GB/T 39794.2-2021 金属屋面抗风掀性能检测方法 第2部分:动态压力法(中英文版) Test method for wind uplift resistance of mental roof—Part 2:Dynamic pressure method |
|||
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|||
GB/T 13277.7-2021 压缩空气? 第7部分:活性微生物含量测量方法(中英文版) Compressed air -- Part 7:Test method for viable microbiological contaminant content |
|||
GB/T 13277.6-2021 压缩空气 第6部分:气态污染物含量测量方法(中英文版) Compressed air -- Part 6:Test methods for gaseous contaminant content |
|||
GB/T 41055-2021 预应力钢筒混凝土管无损检测(远场涡流电磁法)技术要求(中英文版) Technical requirements for nondestructive testing (electromagnetic method based on remote field eddy current) on prestressed concrete cylinder pipe |
|||
GB/T 16900.4-2020 图形符号表示规则 第4部分:对象相关性测试方法(中英文版) Rules for the presentation of graphical symbols—Part 4: Methods for testing symbol referent association |
|||
GB/T 16900.2-2020 图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols—Part 2: Methods for testing comprehensibility |
|||
GB/T 9966.1-2020 天然石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验(中英文版) Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
|||
GB/T 39709-2020 动车组玻璃、车窗耐静压及车窗密封性能试验方法(中英文版) Test methods of multiple units glass, windiows static pressure and windiows sealing performance |
|||
GB/T 39379-2020 无压热塑性塑料管道系统 水密性试验方法(中英文版) Thermoplastics piping systems for non-pressure applications—Test method for watertightness |
|||
GB/T 15330-2020 压敏胶粘带水渗透率试验方法(中英文版) Test method for water penetration rate of pressure-sensitive tapes |
|||
GB/T 35465.4-2020 聚合物基复合材料疲劳性能测试方法 第4部分:拉-压和压-压疲劳(中英文版) Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue |
|||
GB/T 39383-2020 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法(中英文版) Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints |
|||
GB/T 15331-2020 压敏胶粘带水蒸气透过率试验方法(中英文版) Test method for water vapor transmission rate of pressure-sensitive tapes |
|||
GB/T 23711.1-2019 塑料衬里压力容器试验方法 第1部分:电火花试验(中英文版) Test method for pressure vessels lined with plastics—Part 1:Spark testing |
|||
GB/T 13277.5-2019 压缩空气 第5部分:油蒸气及有机溶剂测量方法(中英文版) Compressed air—Part 5: Test methods for oil vapour and organic solvent content |
|||
GB/T 32065.14-2019 海洋仪器环境试验方法 第14部分:振动试验(中英文版) Environmental test methods for oceanographic instruments—Part 15:Hydrostatic pressure test |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 21839-2019 预应力混凝土用钢材试验方法(中英文版) Test methods of steel for prestressing concrete |
|||
GB/T 37825-2019 建筑玻璃均布静载模拟风压试验方法(中英文版) Test method for simulating wind pressure resistance of building glass under the uniform static loads |
|||
GB/T 1431-2019 炭素材料耐压强度测定方法(中英文版) The test method for compressive strength of carbon materials |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.8-2019 塑料衬里压力容器试验方法 第8部分:耐高电阻试验(中英文版) Test method for pressure vessels lined with plastics—Part 8:High-resistance testing |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 36580-2018 船舶螺旋桨空泡脉动压力模型试验方法(中英文版) Test method of model propeller for cavitation observation and pressure fluctuation measurement |
|||
GB/T 36230-2018 数控闭式多连杆压力机 性能要求与试验方法(中英文版) CNC Straight-side link-drive press—Performance requirements and test methods |
|||
GB/T 6881.2-2017 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法(中英文版) Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room |
|||
GB/T 30475.3-2017 压缩空气过滤器 试验方法 第3部分:颗粒(中英文版) Filters for compressed air—Test methods—Part 3: Particulates |
|||
GB/T 34559-2017 碳/碳复合材料压缩性能试验方法(中英文版) Test method for compressive property of C/C composites |
|||
GB/T 9252-2017 气瓶压力循环试验方法(中英文版) Method for pressure cycling test of gas cylinders |
|||
GB/T 34544-2017 小型燃料电池车用低压储氢装置安全试验方法(中英文版) Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles |
|||
GB 26149-2017 乘用车轮胎气压监测系统的性能要求和试验方法(中英文版) Performance requirements and test methods of tire pressure monitoring system for passenger cars |
|||
GB/T 34619-2017 容积式制冷剂压缩机容积流量试验方法(中英文版) Test method for volumetric flow of positive displacement refrigerant compressors |
|||
GB/T 30475.4-2017 压缩空气过滤器 试验方法 第4部分:水(中英文版) Filters for compressed air—Test methods—Part 4: Water |
|||
GB/T 3854-2017 增强塑料巴柯尔硬度试验方法(中英文版) Test method for hardness of reinforced plastics by means of a Barcol impresser |
|||
GB/T 33896-2017 分离膜外壳循环压力试验方法(中英文版) Test method for cyclic pressure of membrane housing |
|||
GB/T 33922-2017 MEMS压阻式压力敏感芯片性能的圆片级试验方法(中英文版) Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances |
|||
GB/T 24218.16-2017 纺织品 非织造布试验方法 第16部分:抗渗水性的测定(静水压法)(中英文版) Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) |
|||
GB/T 8243.6-2017 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test |
|||
GB/T 33614-2017 三维编织物及其树脂基复合材料压缩性能试验方法(中英文版) Test method for compression properties of 3D braided fabric and its polymer matrix composites |
|||
GB/T 33488.1-2017 化工用塑料焊接制承压设备检验方法 第1部分:总则(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements |
|||
GB/T 33488.3-2017 化工用塑料焊接制承压设备检验方法 第3部分:射线检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination |
|||
GB/T 33488.2-2017 化工用塑料焊接制承压设备检验方法 第2部分:外观检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination |
|||
GB/T 33488.4-2017 化工用塑料焊接制承压设备检验方法 第4部分:超声检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination |
|||
GB/T 5169.21-2017 电工电子产品着火危险试验 第21部分:非正常热 球压试验方法(中英文版) Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method |
|||
GB/T 14513.1-2017 气动 使用可压缩流体元件的流量特性测定 第1部分:稳态流动的一般规则和试验方法(中英文版) Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow |
|||
GB/T 5170.10-2017 环境试验设备检验方法 第10部分:高低温低气压试验设备(中英文版) Inspection methods for environmental testing equipments—Part 10:Combined high and low temperature/low air pressure testing equipments |
|||
GB/T 35160.3-2017 合成石材试验方法 第3部分:压缩强度的测定(中英文版) Test methods for agglomerated stone—Part 3:Determination of compressive strength |
|||
GB/T 33390-2016 鞋类 鞋类和鞋类部件中存在的限量物质 二甲基甲酰胺的测定(中英文版) Footwear—Critical substances potentially present in footwear and footwear components—Test method to quantitatively determine dimethylformamide in footwear materials |
|||
GB/T 5773-2016 容积式制冷剂压缩机性能试验方法(中英文版) The method of performance test for positive displacement refrigerant compressors |
|||
GB/T 32491-2016 玻璃纤维增强热固性树脂管及管件长期静水压试验方法(中英文版) Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings |
|||
GB/T 13277.2-2015 压缩空气 第2部分:悬浮油含量测量方法(中英文版) Compressed air—Part 2: Test methods for oil aerosol content |
|||
GB/T 13277.4-2015 压缩空气 第4部分:固体颗粒测量方法(中英文版) Compressed air—Part 4: Test methods for solid particle content |
|||
GB/T 13277.3-2015 压缩空气 第3部分:湿度测量方法(中英文版) Compressed air—Part 3: Test methods for measurement of humidity |
|||
GB/T 15478-2015 压力传感器性能试验方法(中英文版) Test methods of the performances for pressure transducer/sensor |
|||
GB/T 8243.13-2015 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings |
|||
GB/T 18260-2015 木材防腐剂对白蚁毒效实验室试验方法(中英文版) Method of laboratory test for toxicity of wood preservatives against termites |
|||
GB/T 25151.6-2014 尿素高压设备制造检验方法 第6部分:尿素高压设备氦渗漏试验方法(中英文版) Fabrication and inspection method for high pressure urea equipment―Part 6: Helium leakage test method for urea high pressure equipment |
|||
GB/T 30968.4-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分:开孔压缩强度试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength |
|||
GB/T 30968.2-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分:充填孔拉伸和压缩试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression |
|||
GB/T 10870-2014 蒸气压缩循环冷水(热泵)机组性能试验方法(中英文版) The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle |
|||
GB/T 30709-2014 层压复合垫片材料压缩率和回弹率试验方法(中英文版) Standard test method for compressibility and recovery of laminated composite gasket materials |
|||
GB/T 30475.1-2013 压缩空气过滤器 试验方法 第1部分:悬浮油(中英文版) Filters for compressed air―Test methods―Part 1: Oil aerosols |
|||
GB/T 30202.3-2013 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分:耐磨强度、耐压强度(中英文版) Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and compression strength |
|||
GB/T 30475.2-2013 压缩空气过滤器 试验方法 第2部分:油蒸气(中英文版) Filters for compressed air― Test methods―Part 2: Oil vapours |
|||
GB/T 30048-2013 煤泥压滤性试验方法(中英文版) Test method for characteristic of pressure filtration of slime |
|||
GB/T 30177.1-2013 过滤机性能测试方法 第1部分:加压过滤机(中英文版) Methods of perfomance testing for filters―Part 1:Press filter |
|||
GB/T 29907-2013 建筑幕墙动态风压作用下水密性能检测方法(中英文版) Test method for watertightness of curtain walls under dynamic wind pressure |
|||
GB/T 29900-2013 木材防腐剂性能评估的野外近地面试验方法(中英文版) Field test method for evaluation of wood preservatives by ground proximity decay |
|||
GB/T 4744-2013 纺织品 防水性能的检测和评价 静水压法(中英文版) Textiles - Testing and evaluation for water resistance - Hydrostatic pressure method |
|||
GB/T 29627.2-2013 电气用聚芳酰胺纤维纸板 第2部分:试验方法(中英文版) Aramid pressboard for electrical purposes - Part 2: Methods of test |
|||
GB/T 19264.2-2013 电气用压纸板和薄纸板 第2部分:试验方法(中英文版) Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
|||
GB/T 16903.3-2013 标志用图形符号表示规则 第3部分:感知性测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility |
|||
GB/T 16903.2-2013 标志用图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility |
|||
GB/T 29459.2-2012 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature |
|||
GB/T 29459.1-2012 在役承压设备金属材料小冲杆试验方法 第1部分:总则(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements |
|||
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
|||
GB/T 15623.3-2012 液压传动 电调制液压控制阀 第3部分:压力控制阀试验方法(中英文版) Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves |
|||
GB/T 8017-2012 石油产品蒸气压的测定 雷德法(中英文版) Standard test method for vapor pressure of petroleum products (Reid Method) |
|||
GB/T 27797.8-2011 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
|||
GB/T 27797.3-2011 纤维增强塑料 试验板制备方法 第3部分:湿法模塑(中英文版) Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding |
|||
GB/T 11059-2011 原油蒸气压的测定 膨胀法(中英文版) Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) |
|||
GB/T 26729-2011 农业灌溉设备 地表灌溉用聚氯乙烯(PVC)低压管 技术规范和试验方法(中英文版) Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods |
|||
GB/T 17491-2011 液压泵、马达和整体传动装置 稳态性能的试验及表达方法(中英文版) Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance |
|||
GB/T 6536-2010 石油产品常压蒸馏特性测定法(中英文版) Standard test method for distillation of petroleum products at atmospheric pressure |
|||
GB/T 5923-2010 汽车柴油机燃油滤清器试验方法(中英文版) Test methods of fuel filter for automotive compression ignition engines |
|||
GB/T 25395-2010 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法(中英文版) Equipment for vine cultivation and wine making - Grape presses - Methods of test |
|||
GB/T 25132-2010 液压过滤器 压差装置试验方法(中英文版) Hydraulic fluid power - Filters - Test method for differential pressure devices |
|||
GB/T 13929-2010 水环真空泵和水环压缩机 试验方法(中英文版) Methods of testing for water-ring vacuum pumps and compressors |
|||
GB/T 25151.3-2010 尿素高压设备制造检验方法 第3部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
|||
GB/T 25151.4-2010 尿素高压设备制造检验方法 第4部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
|||
GB/T 25151.5-2010 尿素高压设备制造检验方法 第5部分:尿素高压设备氨渗漏试验方法(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 5: Ammonia leakage test method for urea high pressure equipment |
|||
GB 12476.8-2010 可燃性粉尘环境用电气设备 第8部分: 试验方法 确定粉尘最低点燃温度的方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust |
|||
GB 12476.10-2010 可燃性粉尘环境用电气设备 第10部分:试验方法 粉尘与空气混合物最小点燃能量的测定方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures |
|||
GB 12476.9-2010 可燃性粉尘环境用电气设备 第9部分:试验方法 粉尘层电阻率的测定方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers |
|||
GB/T 24205-2009 铁矿粉 烧结试验结果表示方法(中英文版) Iron ores fines - Method for presentation the results of sintering test |
|||
GB/T 23711.4-2009 氟塑料衬里压力容器 耐真空试验方法(中英文版) Vacuum test method for pressure vessels lined with fluoroplastics |
|||
GB/T 13465.6-2009 不透性石墨管水压爆破试验方法(中英文版) Test method for hydraulic pressure bursting of impermeable graphite pipe |
|||
GB/T 23711.1-2009 氟塑料衬里压力容器 电火花试验方法(中英文版) Spark test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.3-2009 氟塑料衬里压力容器 耐高温试验方法(中英文版) High temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.5-2009 氟塑料衬里压力容器 热胀冷缩试验方法(中英文版) Expansion and contraction test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.6-2009 氟塑料衬里压力容器 压力试验方法(中英文版) Hydrostatic pressure test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.2-2009 氟塑料衬里压力容器 耐低温试验方法(中英文版) Low temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 11037-2009 船用锅炉及压力容器强度和密性试验方法(中英文版) Test method for strength and tightness of marine boiler and pressure vessel |
|||
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
|||
GB/T 9327-2008 额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求(中英文版) Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements |
|||
GB/T 3903.28-2008 鞋类 外底试验方法 压缩能(中英文版) Footwear - Test methods for outsoles - Compression energy |
|||
GB/T 14271-2008 毛绒净毛率试验方法 油压法(中英文版) Test method for the determination of scoured yield raw wool - Oil pressure method |
|||
GB/T 540-2008 耐油石棉橡胶板试验方法(中英文版) Test methods for oil-resisting compressed asbestos fibre jointing |
|||
GB/T 22307-2008 密封垫片高温抗压强度试验方法(中英文版) Standard test method for compressive strength of gaskets at elevated temperatures |
|||
GB/T 8167-2008 包装用缓冲材料动态压缩试验方法(中英文版) Testing method of dynamic compression for packaging cushioning materials |
找到:207條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |