中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 5169.34-2023 电工电子产品着火危险试验 第34部分:着火危险评定导则 起燃性 试验方法概要和相关性(中英文版) Fire hazard tests for electrical and electronic products Part 34: Guidelines for fire hazard assessment Ignitability Summary and relevance of test methods |
|||
GB/T 42610-2023 高压氢气瓶塑料内胆和氢气相容性试验方法(中英文版) Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder |
|||
GB/T 2423.24-2022 环境试验 第2部分:试验方法 试验S:模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则(中英文版) Environmental testing - Part 2: Test methods - Test S: Simulation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests |
|||
GB/T 41600-2022 汽车直线行驶稳定性试验方法(中英文版) Test method for straight-line running stability of automobiles |
|||
GB/T 41408-2022 感官分析 方法学 受控区域消费者喜好测试一般导则(中英文版) Sensory analysis methodology - General guidelines for testing consumer preferences in controlled areas |
|||
GB/T 7994.3-2022 搪玻璃设备试验方法 第3部分:耐机械冲击枪击试验(中英文版) Test methods for glass-lined equipment - Part 3: Mechanical shock resistance gunshot test |
|||
GB/T 41755-2022 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法(中英文版) Cracking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method |
|||
GB/T 41760-2022 电气石自发极化性能测试方法(中英文版) Test method for spontaneous polarization performance of tourmaline |
|||
GB/T 40467-2021 畜禽肉品质检测 近红外法通则(中英文版) Livestock and poultry meat quality testing—Guideline for near-infrared spectroscopy method |
|||
GB/T 1551-2021 硅单晶电阻率的测定 直排四探针法和直流两探针法(中英文版) Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method |
|||
GB/T 9966.16-2021 天然石材试验方法 第16部分:线性热膨胀系数的测定(中英文版) Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient |
|||
GB/T 5095.2303-2021 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method |
|||
GB/T 39748.6-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
|||
GB/T 5095.2304-2021 电子设备用机电元件 基本试验规程及测量方法 第23-4部分:屏蔽和滤波试验 试验23d:时域内传输线的反射(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain |
|||
GB/T 1001.1-2021 标称电压高于1 000V的架空线路绝缘子 第1部分:交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则(中英文版) Insulators for overhead lines with a nominal voltage above 1 000V—Part 1:Ceramic or glass insulator units for a.c.systems—Definitions,test methods and acceptance criteria |
|||
GB/T 38786-2020 镁及镁合金铸锭纯净度检验方法(中英文版) Testing method for cleanliness of magnesium and magnesium alloy ingots |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 37322-2019 汽油清净性评价 汽油机进气阀沉积物模拟试验法(中英文版) Test method for evaluating gasoline cleanliness—Simulation test of intake valve deposit (IVD) of gasoline engine |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 23711.4-2019 塑料衬里压力容器试验方法 第4部分:耐负压检验(中英文版) Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection |
|||
GB/T 23711.5-2019 塑料衬里压力容器试验方法 第5部分:冷热循环检验(中英文版) Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection |
|||
GB/T 23711.6-2019 塑料衬里压力容器试验方法 第6部分:耐压试验(中英文版) Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing |
|||
GB/T 23711.8-2019 塑料衬里压力容器试验方法 第8部分:耐高电阻试验(中英文版) Test method for pressure vessels lined with plastics—Part 8:High-resistance testing |
|||
GB/T 23711.1-2019 塑料衬里压力容器试验方法 第1部分:电火花试验(中英文版) Test method for pressure vessels lined with plastics—Part 1:Spark testing |
|||
GB/T 4060-2018 硅多晶真空区熔基硼检验方法(中英文版) Test method for boron content in polycrystalline silicon by vacuum zone-melting method |
|||
GB/T 36655-2018 电子封装用球形二氧化硅微粉中α态晶体二氧化硅含量的测试方法 XRD法(中英文版) Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method |
|||
GB/T 36159-2018 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择(中英文版) Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications |
|||
GB/T 35090-2018 无损检测 管道弱磁检测方法(中英文版) Non-destructive testing—Test method for weak magnetic testing of pipeline |
|||
GB/T 37240-2018 晶体硅光伏组件盖板玻璃透光性能测试评价方法(中英文版) Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module |
|||
GB/T 4059-2018 硅多晶气氛区熔基磷检验方法(中英文版) Test method for phosphorus content in polycrystalline silicon by zone-melting method under controlled atmosphere |
|||
GB/T 19443-2017 标称电压高于1500V的架空线路用绝缘子 直流系统用瓷或玻璃绝缘子串元件 定义、试验方法及接收准则(中英文版) Insulators for overhead lines with a nominal voltage above 1500V—Ceramic or glass insulator units for d.c. systems—Definitions,test methods and acceptance criteria |
|||
GB/T 34937-2017 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则(中英文版) Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria |
|||
GB/T 34520.3-2017 连续碳化硅纤维测试方法 第3部分:线密度和密度(中英文版) Test methods for continuous silicon carbide fiber—Part 3:Linear density and density |
|||
GB/T 34898-2017 微机电系统(MEMS)技术 MEMS谐振敏感元件非线性振动测试方法(中英文版) Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element |
|||
GB/T 34481-2017 低位错密度锗单晶片腐蚀坑密度(EPD)的测量方法(中英文版) Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices |
|||
GB/T 33648-2017 车用汽油中典型非常规添加物的识别与测定 红外光谱法(中英文版) Test method for identification and determination of specific non-regular additives in motor gasoline—Infrared spectroscopic method |
|||
GB/T 33624-2017 滚动轴承 清洁度测量及评定方法(中英文版) Rolling bearings—Test and assessment methods for cleanliness |
|||
GB/T 35472.2-2017 湿式自动变速箱摩擦元件试验方法 第2部分:SZBL型摩擦试验机使用指南(中英文版) Test method for friction element of wet automatic transmission—Part 2: SZBL type friction test machine guidelines |
|||
GB/T 35656-2017 化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法(中英文版) Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports |
|||
GB/T 35465.2-2017 聚合物基复合材料疲劳性能测试方法 第2部分:线性或线性化应力寿命(S-N)和应变寿命(ε-N)疲劳数据的统计分析(中英文版) Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data |
|||
GB/T 33014.2-2016 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第2部分:电波暗室法(中英文版) Road vehicles—Component test methods for electrical /electronic disturbances from narrowband radiated electromagnetic energy—Part 2: Absorber-lined shielded enclosure |
|||
GB/T 33014.5-2016 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第5部分:带状线法(中英文版) Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 5: Stripline |
|||
GB/T 503-2016 汽油辛烷值的测定 马达法(中英文版) Determination of the gasoline octane number—Test method for motor octane number |
|||
GB/T 5487-2015 汽油辛烷值的测定 研究法(中英文版) Determination of the gasoline octane number—Test method for research octane number |
|||
GB/T 32437-2015 家具中有害物质检测方法 总则(中英文版) Testing methods for harmful substances of furniture—General guidelines |
|||
GB/T 32278-2015 碳化硅单晶片平整度测试方法(中英文版) Test methods for flatness of monocrystalline silicon carbide wafers |
|||
GB/T 4738-2015 日用陶瓷材料耐酸、耐碱性能测定方法(中英文版) Test method for acid, alkaline resistance for ceramic materials of daily use |
|||
GB/T 5594.3-2015 电子元器件结构陶瓷材料性能测试方法 第3部分:平均线膨胀系数测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 3: Test method for mean coefficient of linear expansion |
|||
GB/T 31405-2015 管道耐蚀涂敷层高温阴极剥离试验方法(中英文版) Standard test method for cathodic disbonding of pipeline coatings subjected to elevated temperatures |
|||
GB/T 31351-2014 碳化硅单晶抛光片微管密度无损检测方法(中英文版) Nondestructive test method for micropipe density of polished monocrystalline silicon carbide wafers |
|||
GB/T 31093-2014 蓝宝石晶锭应力测试方法(中英文版) Test method for stress of monocrystalline sapphire ingot |
|||
GB/T 30867-2014 碳化硅单晶片厚度和总厚度变化测试方法(中英文版) Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers |
|||
GB/T 30866-2014 碳化硅单晶片直径测试方法(中英文版) Test method for measuring diameter of monocrystalline silicon carbide wafers |
|||
GB/T 5949-2014 透明石英玻璃气泡、气线试验方法(中英文版) Test method for bubble and air line of transparent quartz glass |
|||
GB/T 30868-2014 碳化硅单晶片微管密度的测定 化学腐蚀法(中英文版) Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching |
|||
GB/T 19519-2014 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则(中英文版) Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria |
|||
GB/T 7690.1-2013 增强材料 纱线试验方法 第1部分:线密度的测定(中英文版) Reinforcements - Test method for yarns - Part 1: Determination of linear density |
|||
GB/T 18570.6-2011 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版) Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method |
|||
GB/T 26736-2011 道路车辆 制动衬片 耐水、盐水、油和制动液性能试验方法(中英文版) Road vehicles - Brake linings - Test method for resistance to water,saline solution,oil and brake fluid |
|||
GB/T 27408-2010 实验室质量控制 非标准测试方法的有效性评价 线性关系(中英文版) Quality control in laboratories evaluating validity of non-standard test method practice for a linear relationship |
|||
GB/T 1001.2-2010 标准电压高于1000V的架空线路绝缘子 第2部分:交流系统用绝缘子串及绝缘子串组 定义、试验方法和接收准则(中英文版) Insulators for overhead lines with a nominal voltage above 1000V - Part 2: Insulator strings and insulator sets for a.c.systems - Definitions, test methods and acceptance criteria |
|||
GB/T 7962.16-2010 无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版) Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature |
|||
GB/T 26351-2010 蜚蠊抗药性检测方法 德国小蠊不敏感乙酰胆碱酯酶法(中英文版) Test methods of cockroach resistance to insecticides - Test methods of insensitive acetylcholinesterase for Blattella germanica |
|||
GB/T 26349-2010 蝇类抗药性检测方法 家蝇不敏感乙酰胆碱酯酶法(中英文版) Test methods of fly resistance to insecticides - Test methods of insensitive acetylcholinesterase for Musca domestica |
|||
GB/T 26348-2010 蚊虫抗药性检测方法 不敏感乙酰胆碱酯酶法(中英文版) Test methods of mosquito resistance to insecticides - Test methods of insensitive acetylcholinesterase for the mosquito |
|||
GB/T 24218.101-2010 纺织品 非织造布试验方法 第101部分:抗生理盐水性能的测定(梅森瓶法)(中英文版) Textiles - Test methods for nonwovens - Part 101: Saline repellency(Mason Jar Method) |
|||
GB/T 26107-2010 金属与其他无机覆盖层 镀覆和未镀覆金属的外螺纹和螺杆的残余氢脆试验 斜楔法(中英文版) Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method |
|||
GB/T 14141-2009 硅外延层、扩散层和离子注入层薄层电阻的测定 直排四探针法(中英文版) Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array |
|||
GB/T 24582-2009 酸浸取 电感耦合等离子质谱仪测定多晶硅表面金属杂质(中英文版) Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-inductively coupled plasma mass spectrometry |
|||
GB/T 24579-2009 酸浸取 原子吸收光谱法测定多晶硅表面金属污染物(中英文版) Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-atomic absorption spectroscopy |
|||
GB/T 24196-2009 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则(中英文版) Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
|||
GB/T 23711.6-2009 氟塑料衬里压力容器 压力试验方法(中英文版) Hydrostatic pressure test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.5-2009 氟塑料衬里压力容器 热胀冷缩试验方法(中英文版) Expansion and contraction test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.4-2009 氟塑料衬里压力容器 耐真空试验方法(中英文版) Vacuum test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.3-2009 氟塑料衬里压力容器 耐高温试验方法(中英文版) High temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.2-2009 氟塑料衬里压力容器 耐低温试验方法(中英文版) Low temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.1-2009 氟塑料衬里压力容器 电火花试验方法(中英文版) Spark test method for pressure vessels lined with fluoroplastics |
|||
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|||
GB/T 15825.8-2008 金属薄板成形性能与试验方法 第8部分:成形极限图(FLD)测定指南(中英文版) Sheet metal formability and test methods - Part 8: Guidelines for the determination of forming-limit diagrams |
|||
GB/T 16535-2008 精细陶瓷线热膨胀系数试验方法 顶杆法(中英文版) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique |
|||
GB/T 16256-2008 纺织纤维 线密度试验方法 振动仪法(中英文版) Textile fibres - Test method for linear density - Vibroscope method |
|||
GB/T 1036-2008 塑料 -30℃~30℃线膨胀系数的测定 石英膨胀计法(中英文版) Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer |
|||
GB/T 17548-2008 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南(中英文版) Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards |
|||
GB/T 14343-2008 化学纤维 长丝线密度试验方法(中英文版) Testing method for linear density of man-made filament yarns |
|||
GB/T 14335-2008 化学纤维 短纤维线密度试验方法(中英文版) Testing method for linear density of man-made staple fibres |
|||
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|||
GB/T 6100-2007 棉纤维线密度试验方法 中段称重法(中英文版) Test method for linear density of cotton fibres - Cut middles method |
|||
GB/T 20346.2-2006 施肥机械 试验方法 第2部分: 行间施肥机(中英文版) Equipment for distributing fertilizers - Test methods - Part 2: Fertilizer distributors in lines |
|||
GB/T 20405.5-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution |
|||
GB/T 20142-2006 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则(中英文版) Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria |
|||
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|||
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|||
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
|||
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|||
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法)(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
|||
GB/T 19443-2004 标称电压高于1000V的架空线路用绝缘子----直流系统用瓷或玻璃绝缘子元件----定义、试验方法和接收准则(中英文版) Insulators for overhead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--Difinitions,test methods and acceptance criteria |
|||
GB/Z 19397-2003 工业机器人 电磁兼容性试验方法和性能评估准则 指南(中英文版) Industrial robots--EMC test methods and performance evaluation criteria--Guidelines |
|||
GB/T 5556-2003 表面活性剂 耐碱性测试法(中英文版) Surface active agents--Test method for alkaline stability |
|||
GB/T 19230.6-2003 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法)(中英文版) Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) |
|||
GB/T 19230.5-2003 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法)(中英文版) Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) |
|||
GB/T 19230.4-2003 评价汽油清净剂使用效果的试验方法 第4部分: 汽油清净剂对汽油机进气系统沉积物(ISD)生成倾向影响的试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent |
|||
GB/T 19230.3-2003 评价汽油清净剂使用效果的试验方法 第3部分: 汽油清净剂对电子孔式燃油喷嘴(PFI)堵塞倾向影响的试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling |
|||
GB/T 19230.2-2003 评价汽油清净剂使用效果的试验方法 第2部分: 汽油清净剂破乳性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 2: Test method for demulsibility of gasoline detergent |
|||
GB/T 19230.1-2003 评价汽油清净剂使用效果的试验方法 第1部分:汽油清净剂防锈性能试验方法(中英文版) Test method for evaluating gasoline detergent in use--Part 1: Test method for rust-preventing characteristics of gasoline detergent |
|||
GB/T 1001.1-2003 标称电压高于1000V的架空线路绝缘子 第1部分:交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则(中英文版) Insulators for overhead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions,test methods and acceptance criteria |
|||
GB/T 1970-1996 多孔陶瓷耐酸、碱腐蚀性能试验方法(中英文版) Test method for acid and alkaline-resistance of porous ceramic |
|||
GB/T 14235.4-1993 熔模铸造模料 线收缩率测定方法(中英文版) Testing method for linear contraction of pattern materials in investment casting |
|||
GB/T 12636-1990 微波介质基片复介电常数带状线测试方法(中英文版) Stripline test method for complexpermittivity of microwave dielectric substrates |
|||
GB/T 5442-1985 电话自动交换网带内单频脉冲线路信号技术指标测试方法(中英文版) The test methods for the technical specifications of inband pulsing single frequency line signalling system for automatic telephone switching network |
|||
GB/T 5444-1985 电话自动交换网用户信号技术指标测试方法(中英文版) The test methods for the technical specifications of subscriber line signalling for automatic telephone switching network |
找到:117條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |