中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 15558.2-2023 燃气用埋地聚乙烯(PE)管道系统 第2部分:管材(中英文版) Buried polyethylene (PE) piping systems for gas use Part 2: Pipes |
|||
GB/T 19812.6-2022 塑料节水灌溉器材 第6部分:输水用聚乙烯(PE)管材(中英文版) Plastic water-saving irrigation equipment - Part 6: Polyethylene (PE) pipes for water delivery |
|||
GB/T 29047-2021 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件(中英文版) Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes |
|||
GB/T 40967-2021 核电厂用聚乙烯(PE)管材及管件(中英文版) Polyethylene(PE)pipes and fittings for nuclear power plants |
|||
GB/T 28799.2-2020 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分:管材(中英文版) Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes |
|||
GB/T 20674.4-2020 塑料管材和管件 聚乙烯系统熔接设备 第4部分:可追溯编码(中英文版) Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding |
|||
GB/T 20674.3-2020 塑料管材和管件 聚乙烯系统熔接设备 第3部分:操作者代码(中英文版) Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge |
|||
GB/T 20674.2-2020 塑料管材和管件 聚乙烯系统熔接设备 第2部分:电熔连接(中英文版) Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion |
|||
GB/T 20674.1-2020 塑料管材和管件 聚乙烯系统熔接设备 第1部分:热熔对接(中英文版) Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion |
|||
GB/T 19472.1-2019 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材(中英文版) Polyethylene structure wall pipeline system for underground usage—Part 1: Polyethylene double wall corrugated pipes |
|||
GB/T 37263-2018 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管(中英文版) Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes |
|||
GB/T 13663.2-2018 给水用聚乙烯(PE)管道系统 第2部分:管材(中英文版) Polyethylene(PE) piping systems for water supply—Part2: Pipes |
|||
GB/T 34611-2017 硬质聚氨酯喷涂聚乙烯缠绕预制直埋保温管(中英文版) Rigid polyurethane spray polyethylene winding prefabricated directly buried insulating pipes |
|||
GB/T 19472.2-2017 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材(中英文版) Polyethylene structure-wall piping systems for underground usage—Part2: Polyethylene spirally enwound structure-wall pipes |
|||
GB 15558.1-2015 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材(中英文版) Buried polyethylene(PE) piping systems for the supply of gaseous fuels—Part 1 :Pipes |
|||
GB/T 32434-2015 塑料管材和管件 燃气和给水输配系统用聚乙烯(PE)管材及管件的热熔对接程序(中英文版) Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems |
|||
GB/T 29047-2012 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件(中英文版) Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes |
|||
GB/T 29460-2012 含缺陷聚乙烯管道电熔接头安全评定(中英文版) Safey assessment for electrofusion joint of polyethylene pipes containing defects |
|||
GB/T 28799.2-2012 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分:管材(中英文版) Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes |
|||
GB 26255.2-2010 燃气用聚乙烯管道系统的机械管件 第2部分:公称外径大于63mm的管材用钢塑转换管件(中英文版) Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 2: Metal fittings for pipes of nominal outside diameter greaten than 63mm |
|||
GB 26255.1-2010 燃气用聚乙烯管道系统的机械管件 第1部分:公称外径不大于63mm的管材用钢塑转换管件(中英文版) Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
|||
GB/T 20674.2-2006 塑料管材和管件 聚乙烯系统熔接设备 第2部分:电熔连接(中英文版) Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion |
|||
GB/T 20674.1-2006 塑料管材和管件 聚乙烯系统熔接设备 第1部分:热熔对接(中英文版) Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1:Butt fusion |
|||
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件(中英文版) Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes |
|||
GB/T 15819-2006 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求(中英文版) Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification |
|||
GB/T 19796-2005 农业灌溉设备 聚乙烯承压管用塑料鞍座(中英文版) Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes |
|||
GB/T 19806-2005 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验(中英文版) Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies |
|||
GB/T 19712-2005 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法(中英文版) Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance |
|||
GB/T 19807-2005 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备(中英文版) Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting |
|||
GB/T 19808-2005 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验(中英文版) Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
|||
GB/T 19809-2005 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备(中英文版) Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
|||
GB/T 19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材(中英文版) Polyethylene structure wall pipeline system for underground usage--Part 1:Polyethylene double wall corrugated pipes |
|||
GB/T 19472.2-2004 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材(中英文版) Polyethylene structure-wall piping system for underground usage--Part 2:Polyethylene spirally enwound structure-wall pipes |
|||
GB 15558.1-2003 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材(中英文版) Buried polyethylene(PE)piping systems for the supply of gaseous fuels--Part 1:Pipes |
|||
GB/T 18992.2-2003 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材(中英文版) Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 2: Pipes |
|||
GB/T 18474-2001 交联聚乙烯(PE-X)管材与管件 交联度的试验方法(中英文版) Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content |
|||
GB/T 13663-2000 给水用聚乙烯(PE)管材(中英文版) Polyethylene pipes for water supply |
|||
GB/T 17391-1998 聚乙烯管材与管件热稳定性试验方法(中英文版) Test method for thermal stability of polyethylene pipes and fittings |
|||
GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验(中英文版) Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings |
|||
GB/T 13021-1991 聚乙烯管材和管件炭黑含量的测定 热失重法(中英文版) Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis |
找到:40條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |