中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 6098.1-2006 棉纤维长度试验方法 第1部分:罗拉式分析仪法(中英文版) Test method for length of cotton fibres - Part 1: Roller analyser |
![]() |
|
![]() |
GB 12995-2006 机动轮椅车(中英文版) Combustion-motor-driven wheelchairs |
![]() |
|
![]() |
GB/T 20135-2006 智能运输系统 电子收费 系统框架模型(中英文版) Intelligent transport systems Electronic toll collection System architecture |
![]() |
|
![]() |
GB/T 20403-2006 普通固定式康复训练床(中英文版) Rigid rehabilitation training bed |
![]() |
|
![]() |
GB/T 20405.1-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH |
![]() |
|
![]() |
GB/T 20405.2-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers |
![]() |
|
![]() |
GB/T 20405.3-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation |
![]() |
|
![]() |
GB/T 20405.4-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating |
![]() |
|
![]() |
GB/T 20405.5-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution |
![]() |
|
![]() |
GB/T 20133-2006 道路交通信息采集 信息分类与编码(中英文版) Road traffic information collection - Classification and code of message |
![]() |
|
![]() |
GB/T 20132-2006 船舶与海上技术 客船低位照明 布置(中英文版) Ships and marine technology -- Low-location lighting on passenger ships -- Arrangement |
![]() |
|
![]() |
GB/T 20207.1-2006 丙烯腈-丁二烯-苯乙烯(ABS)压力管道系统 第1部分:管材(中英文版) Acrylonitrile-butadiene-styrene (ABS) pressure piping systems--Part 1: Pipes |
![]() |
|
![]() |
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件(中英文版) Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes |
![]() |
|
![]() |
GB/T 15819-2006 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求(中英文版) Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification |
![]() |
|
![]() |
GB/T 10002.1-2006 给水用硬聚氯乙烯(PVC-U)管材(中英文版) Unplasticized poly(vinyl chloride) (PVC-U) pipes for water supply |
![]() |
|
![]() |
GB/T 5836.1-2006 建筑排水用硬聚氯乙烯(PVC-U)管材(中英文版) Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings |
![]() |
|
![]() |
GB/T 7740-2006 天然肠衣(中英文版) Natural casings |
![]() |
|
![]() |
GB/T 20207.2-2006 丙烯腈-丁二烯-苯乙烯(ABS)压力管道系统 第2部分:管件(中英文版) Acrylonitrile-butadiene-styrene (ABS) pressure piping systems-Part 2: fittings |
![]() |
|
![]() |
GB 4455-2006 农业用聚乙烯吹塑棚膜(中英文版) Polyethylene blown covering film for agriculture |
![]() |
|
![]() |
GB/T 20199-2006 表面活性剂-工业烷烃磺酸盐-烷烃单磺酸盐含量的测定(直接两相滴定法)(中英文版) Surface active agents - Technical alkane sulfonates - Determination of alkane monosulfonates content by direct two-phase titration |
![]() |
|
![]() |
GB/T 20202-2006 农业用乙烯-乙酸乙烯酯共聚物(EVA)吹塑棚膜(中英文版) Ethylene-vinyl acetate copolymer blown covering film for agriculture |
![]() |
|
![]() |
GB/T 5836.2-2006 建筑排水用硬聚氯乙烯(PVC-U)管件(中英文版) Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste inside buildings |
![]() |
|
![]() |
GB/T 20200-2006 α-烯基磺酸钠(中英文版) Sodium alpha-olefin sulfonate |
![]() |
|
![]() |
GB/T 20198-2006 表面活性剂和洗涤剂-在碱性条件下可水解的阴离子活性物-可水解和不可水解阴离子活性物的测定(中英文版) Surface active agents - Detergents - Anionic-active matter hydrolyzable under alkaline conditions - Determination of hydrolyzable and non-hydrolyzable anionic-active matter |
![]() |
|
![]() |
GB/T 20197-2006 降解塑料的定义、分类、标识和降解性能要求(中英文版) Define, classify, marking and degradability requirement of degradable plastic |
![]() |
|
![]() |
GB 14749-2006 婴儿学步车安全要求(中英文版) Safety requirements for baby walking frames |
![]() |
|
![]() |
GB 14748-2006 儿童推车安全要求(中英文版) Safety requirements for wheeled child conveyances |
![]() |
|
![]() |
GB 14747-2006 儿童三轮车安全要求(中英文版) Safety requirements for child tricycles |
![]() |
|
![]() |
GB 14746-2006 儿童自行车安全要求(中英文版) Safety requirements for bicycles for young children |
![]() |
|
![]() |
GB/T 12786-2006 自动化内燃机电站通用技术条件(中英文版) Automatic electric power plant with internal combustion engines for general specification |
![]() |
|
![]() |
GB/T 4942.1-2006 旋转电机整体结构的防护等级(IP代码)-分级(中英文版) Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
![]() |
|
![]() |
GB/T 12168-2006 带电作业用遮蔽罩(中英文版) Protective covers of insulating material for live working |
![]() |
|
![]() |
GB/T 12167-2006 带电作业用铝合金紧线卡线器(中英文版) Aluminium alloy grip clamps of tension wire for live working |
![]() |
|
![]() |
GB/T 6994-2006 船舶电气设备 定义和一般规定(中英文版) Electrical installation in ships - Definitions and general requirements |
![]() |
|
![]() |
GB/T 20142-2006 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则(中英文版) Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria |
![]() |
|
![]() |
GB/T 12190-2006 电磁屏蔽室屏蔽效能的测量方法(中英文版) Method for measuring the shielding effectiveness of electromagnetic shielding enclosures |
![]() |
|
![]() |
GB/T 20140-2006 透平型发电机定子绕组端部动态特性和振动试验方法及评定(中英文版) Dynamic characteristic and vibration measurement method of turbo-generators on stator windings and evaluation criteria |
![]() |
|
![]() |
GB/T 20139-2006 电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法(中英文版) Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS |
![]() |
|
![]() |
GB/T 20138-2006 电器设备外壳对外界机械碰撞的防护等级(IK代码)(中英文版) Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
![]() |
|
![]() |
GB/T 20137-2006 三相笼型异步电动机损耗和效率的确定方法(中英文版) Method for determining losses and efficiency of three-phase cage induction motors |
![]() |
|
![]() |
GB/T 15468-2006 水轮机基本技术条件(中英文版) Fundamental technical requirements for hydraulic turbines |
![]() |
|
![]() |
GB/T 15208.2-2006 微剂量X射线安全检查设备 第2部分:测试体(中英文版) Micro-dose X-ray security inspection system - Part 2: Test block |
![]() |
|
![]() |
GB/T 14285-2006 继电保护和安全自动装置技术规程(中英文版) Technical code for relaying protection and security automatic equipment |
![]() |
|
![]() |
GB/T 20136-2006 内燃机电站通用试验方法(中英文版) Electric power plant with inernal combustion engines, general method of test for |
![]() |
|
![]() |
GB/T 6910-2006 锅炉用水和冷却水分析方法 钙的测定 络合滴定法(中英文版) Methods for analysis of water for boiler and for cooling determination of calcium-complexometric titration |
![]() |
|
![]() |
GB/T 15152-2006 脉冲噪声干扰引起移动通信性能降级的评定方法(中英文版) Methods of judging degradation for interference to mobile radiocommunication in the presence of impulsive noise |
![]() |
|
![]() |
GB/T 6113.402-2006 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分:不确定度、统计学和限值建模 测量设备和设施的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
![]() |
|
![]() |
GB/T 20155-2006 电池中汞、镉、铅含量的测定(中英文版) Determination of mercury, cadmium and lead in battery |
![]() |
|
![]() |
GB/T 20153-2006 新型照明产品的分类与解释(中英文版) Classification and interpretation of new lighting products |
![]() |
|
![]() |
GB/T 20152-2006 石英卤钨灯压封部位温度的标准测量方法(中英文版) Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [951] [952] [953] [954] [955] [956] [957] |