中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 18437.1-2009
燃气汽车改装技术要求 第1部分:压缩天然气汽车(中英文版)
The technical criterion of refitting for vehicle by using gas - Part 1: Compressed natural gas automobile
 
GB/T 9772-2009
纤维水泥波瓦及其脊瓦(中英文版)
Fiber cement corrugated sheets and ridge tile
 
GB/T 23266-2009
陶瓷板(中英文版)
Ceramic board
 
GB/T 23265-2009
水泥混凝土和砂浆用短切玄武岩纤维(中英文版)
Chopped basalt fiber for cement, cement mortar and concrete
 
GB/T 23264-2009
电动自行车用制动衬片总成(中英文版)
Brake lining assembly for electric power assist bicycles
 
GB/T 23263-2009
制品中石棉含量测定方法(中英文版)
Determination of asbestos in products
 
GB/T 23262-2009
非金属密封填料试验方法(中英文版)
Test method for nonmetallic sealing packings
 
GB/T 23261-2009
石材用建筑密封胶(中英文版)
Building sealants for stone
 
GB/T 23260-2009
带自粘层的防水卷材(中英文版)
Waterproof sheet with self-adhering layer
 
GB/T 23305.3-2009
造船 船体结构单元的拓扑 第3部分:单元间的关系(中英文版)
Shipbuilding - Topology of ship hull structure elements - Part 3: Relations of elements
 
GB/T 12988-2009
无机地面材料耐磨性能试验方法(中英文版)
Test method for abrasion resistance of inorganic paving materials
 
GB/T 18570.11-2009
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
 
GB/T 11836-2009
混凝土和钢筋混凝土排水管(中英文版)
Concrete and reinforced concrete sewer pipes
 
GB/T 23299-2009
船舶与海上技术 静水压力释放器(中英文版)
Ships and marine technology - Hydrostatic release units
 
GB/T 18570.2-2009
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分:清理过的表面上氯化物的实验室测定(中英文版)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
 
GB/T 18573-2009
小艇 电气装置 避雷保护(中英文版)
Small craft - Electrical devices - Lightning-protection systems
 
GB/T 23259-2009
压力容器用视镜玻璃(中英文版)
Sight glass for pressure vessels
 
GB/T 23298-2009
船舶与海上技术 气胀式救生装置用充气系统(中英文版)
Ships and marine technology - Gas inflation systems for inflatable life-saving appliances
 
GB/T 9911-2009
船用柴油机辐射的空气噪声测量方法(中英文版)
Measure method of airborne noise emitted by marine diesel engine
 
GB/T 23300-2009
平板闸阀(中英文版)
Parallel plane disc gate valves
 
GB/T 23302-2009
船舶与海上技术 救生艇筏和救助艇用海锚(中英文版)
Ships and marine technology - Sea anchors for survival craft and rescue boats
 
GB/T 23303-2009
船舶与海上技术 充气式救助艇 充气腔用胶布(中英文版)
Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers
 
GB/T 23304-2009
造船 船体型线 格式和数据结构(中英文版)
Shipbuilding - Shiplines - Formats and data organization
 
GB/T 23305.1-2009
造船 船体结构单元的拓扑 第1部分:单元的位置(中英文版)
Shipbuilding - Topology of ship hull structure elements - Part 1: Location of elements
 
GB/T 23305.2-2009
造船 船体结构单元的拓扑 第2部分:单元的描述(中英文版)
Shipbuilding - topology of ship hull structure elements - Part 2: Description of elements
 
GB/T 23865-2009
比例照相规则(中英文版)
The scaled photography method
 
GB/T 6383-2009
振动空蚀试验方法(中英文版)
The method of vibration cavitation erosion test
 
GB/T 8923.3-2009
涂覆涂料前钢材表面处理 表面清洁度的目视评定 第3部分:焊缝、边缘和其他区域的表面缺陷的处理等级(中英文版)
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds,edges and other areas with surface imperfections
 
GB/T 23297-2009
造船 船体型线 几何数据的标识(中英文版)
Shipbuilding - Shiplines - Identification of geometric data
 
GB 23255-2009
汽车昼间行驶灯配光性能(中英文版)
Photometric characteristics of daytime running lamps for motor vehicles
 
GB 23254-2009
货车及挂车 车身反光标识(中英文版)
Retro-reflective markings for trucks and trailers
 
GB/T 23301-2009
汽车车轮用铸造铝合金(中英文版)
Casting aluminum alloy for automobile wheels
 
GB/T 1348-2009
球墨铸铁件(中英文版)
Spheroidal graphite iron castings
 
GB/T 6967-2009
工程结构用中、高强度不锈钢铸件(中英文版)
Martensitic stainless steel castings for general engineering application
 
GB/T 2684-2009
铸造用砂及混合料试验方法(中英文版)
Test methods for foundry sands and molding mixtures
 
GB 23290-2009
机床安全 卡盘的设计和结构安全要求(中英文版)
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
 
GB 5093-2009
压力机用手持电磁吸盘 技术条件(中英文版)
Technical requirements for hand-held electromagnetic disk used for the presses
 
GB/T 21956.4-2009
农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法(中英文版)
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS
 
GB/T 23291-2009
机床 整体爪手动自定心卡盘检验条件(中英文版)
Machine tools - Test conditions for self-centring,manually-operated chucks with one-piece jaws
 
GB/T 23292-2009
拖拉机燃油箱 试验方法(中英文版)
Test methods for tractor fuel tank
 
GB/T 11352-2009
一般工程用铸造碳钢件(中英文版)
Carbon steel castings for general engineering purpose
 
GB 9690-2009
食品容器、包装材料用三聚氰胺-甲醛成型品卫生标准(中英文版)
Hygienic standard for melamine - Formaldehyde products used as food containers and packaging materials
 
GB 23242-2009
食品加工机械 食物切碎机和搅拌机 安全和卫生要求(中英文版)
Food processing machinery - Food processors and blenders - Safety and hygiene requirements
 
GB/T 1928-2009
木材物理力学试验方法总则(中英文版)
General requirements for physical and mechanical tests of wood
 
GB/T 1929-2009
木材物理力学试材锯解及试样截取方法(中英文版)
Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood
 
GB/T 1930-2009
木材年轮宽度和晚材率测定方法(中英文版)
Method for determination of the annual rings width and latewood rate of wood
 
GB/T 1931-2009
木材含水率测定方法(中英文版)
Method for determination of the moisture content of wood
 
GB/T 1932-2009
木材干缩性测定方法(中英文版)
Method for determination of the shrinkage of wood
 
GB/T 1933-2009
木材密度测定方法(中英文版)
Method for determination of the density of wood
 
GB/T 1934.1-2009
木材吸水性测定方法(中英文版)
Method for determination of the water absorption of wood
 

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [776] [777] [778] [779] [780] [781] [782]