中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 24559-2009
海洋螺旋桨式风向风速计(中英文版)
Marine propeller anemometer
 
GB/T 9441-2009
球墨铸铁金相检验(中英文版)
Metallographic test for spheroidal graphite cast iron
 
GB/T 10322.8-2009
铁矿石 比表面积的单点测定 氮吸附法(中英文版)
Iron ores - Single-point determination of specific surface area - Nitrogen adsorption method
 
GB/T 11251-2009
合金结构钢热轧厚钢板(中英文版)
Hot-rolled alloy structural steel plates
 
GB/T 13608-2009
合理润滑技术通则(中英文版)
General principle for rational lubrication technology
 
GB/T 14600-2009
电子工业用气体 氧化亚氮(中英文版)
Gas for electronic industry - Nitrous oxide
 
GB/T 14601-2009
电子工业用气体 氨(中英文版)
Gas for electronic industry - Ammonia
 
GB/T 6412-2009
家庭用煤及炉具试验方法(中英文版)
Test method for household coal and stoves
 
GB/T 24505-2009
矿井井下高压含水层探水钻探技术规范(中英文版)
Technical specification of drilling for high pressure aquifer water detection in underground mine
 
GB/T 24501.2-2009
小麦条锈病、吸浆虫防治技术规范 第2部分:小麦吸浆虫(中英文版)
Technical specification for control of wheat stripe rust (Puccinia striiformis West.) and wheat midge - Part 2: Wheat midge
 
GB/T 24494-2009
门两侧在不同气候条件下的变形检测方法(中英文版)
Deformation test method for doors between two different climates
 
GB/T 24495-2009
承重墙与混凝土楼板间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响(中英文版)
Horizontal joints between load-bearing walls and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors
 
GB/T 24496-2009
钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响(中英文版)
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading
 
GB/T 24497-2009
建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况(中英文版)
Performance standards in building - Performance test for precast concrete floors - Behavior under concentrated load
 
GB/T 24498-2009
建筑门窗、幕墙用密封胶条(中英文版)
Gaskets for doors , windows and curtain walls of buildings
 
GB/T 24572.2-2009
火灾现场易燃液体残留物实验室提取方法 第2部分:直接顶空进样法(中英文版)
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples - Part 2: Direct headspace vapors sampling
 
GB/T 24504-2009
煤层气井注入/压降试井方法(中英文版)
The method of injection/falloff well test for coalbed methane well
 
GB/T 24572.1-2009
火灾现场易燃液体残留物实验室提取方法 第1部分:溶剂提取法(中英文版)
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples - Part 1: Solvent extraction
 
GB/T 24506-2009
液压支架型式、参数及型号编制(中英文版)
Type and specification and model number of powered support
 
GB/T 24507-2009
浸渍纸层压板饰面多层实木复合地板(中英文版)
Decorative sheets based on thermosetting resins laminated parquet
 
GB/T 24508-2009
木塑地板(中英文版)
Wood - Plastic composite flooring
 
GB/T 24509-2009
阻燃木质复合地板(中英文版)
Composite wood floor of fire retardant
 
GB/T 24558-2009
声学多普勒流速剖面仪(中英文版)
Acoustic doppler current profiler
 
GB/T 24492-2009
非承重混凝土空心砖(中英文版)
Nonload bearing concrete hollow brick
 
GB/T 24503-2009
矿用圆环链驱动链轮(中英文版)
Mining-Drive sprocket for chains (round link)
 
GB 16413-2009
煤矿井下用玻璃钢制品安全性能检验规范(中英文版)
Inspecting specification of glass fiber reinforced plastic product safety property for coal mining
 
GB/T 24545-2009
车辆车速限制系统技术要求(中英文版)
Requirement of speed limitation system for motor vehicles
 
GB/T 24546-2009
摩托车重心位置的测量方法(中英文版)
Motorcycles - Measurement method for location of centre of gravity
 
GB/T 24547-2009
轻便摩托车重心位置的测量方法(中英文版)
Mopeds - Measurement method for location of centre of gravity
 
GB/T 24548-2009
燃料电池电动汽车 术语(中英文版)
Fuel cell electric vehicles - Terminology
 
GB/T 24549-2009
燃料电池电动汽车 安全要求(中英文版)
Fuel cell electric vehicles - Safety requirements
 
GB/T 24550-2009
汽车对行人的碰撞保护(中英文版)
The protection of motor vehicle for pedestrians in the event of a collision
 
GB/T 24552-2009
电动汽车风窗玻璃除霜除雾系统的性能要求及试验方法(中英文版)
Electric vehicles - Windshield demisters and defrosters system - Performance requirements and test methods
 
GB/T 14603-2009
电子工业用气体 三氟化硼(中英文版)
Gases for electronic industry - Boron trifluoride
 
GB/T 24554-2009
燃料电池发动机性能试验方法(中英文版)
Performance test methods for fuel cell engines
 
GB/T 2933-2009
充气轮胎用车轮和轮辋的术语、规格代号和标志(中英文版)
Wheels and rims for pneumatic tyres - Vocabulary,designation and marking
 
GB/T 4970-2009
汽车平顺性试验方法(中英文版)
Method of running test - Automotive ride comfort
 
GB/T 24534.2-2009
谷物与豆类隐蔽性昆虫感染的测定 第2部分:取样(中英文版)
Cereals and pulses - Determination of hidden insect infestation - Part 2: Sampling
 
GB/T 5909-2009
商用车辆车轮性能要求和试验方法(中英文版)
Performance requirements and test methods of commercial vehicles wheels
 
GB/T 6624-2009
硅抛光片表面质量目测检验方法(中英文版)
Standard method for measuring the surface quality of polished silicon slices by visual inspection
 
GB/T 24553-2009
摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法(中英文版)
Motorcycles and mopeds-limitative device to steering and maximum wheel steer angle-requirements and measurement methods
 
GB 19761-2009
通风机能效限定值及能效等级(中英文版)
Minimum allowable values of energy efficiency and energy efficiency grades for fan
 
GB/T 24538-2009
坠落防护 缓冲器(中英文版)
Personal fall protection equipment - Energy absorbers
 
GB/T 24537-2009
坠落防护 带柔性导轨的自锁器(中英文版)
Personal fall protection equipment - Guided type fall arrester including a flexible anchor line
 
GB/T 24536-2009
防护服装 化学防护服的选择、使用和维护(中英文版)
Protective clothing - Selection, use, maintenance of chemical protective clothing
 
GB 24544-2009
坠落防护 速差自控器(中英文版)
Personal fall protection equipment - Retractable type fall arrester
 
GB 24543-2009
坠落防护 安全绳(中英文版)
Personal fall protection equipment - Lanyards
 
GB 24542-2009
坠落防护 带刚性导轨的自锁器(中英文版)
Personal fall protection equipment - Guided type fall arrester including a rigid anchor line
 
GB 24541-2009
手部防护 机械危害防护手套(中英文版)
Hand protection - Protective gloves against mechanical risks
 
GB 24540-2009
防护服装 酸碱类化学品防护服(中英文版)
Protective clothing - Protective clothing against liquid acids and alkalis
 

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [725] [726] [727] [728] [729] [730] [731]