中国国家标准检索
中国国家标准检索    CIQ检验检疫规范及标准检索
• Easily find China National Standards (GB) for each sort of Import Commodity,
• Help to determine whether the Commodities are in compliance with China's quality standards
• Easily find Import Commodity Inspection and Quarantine Operational Standards of CIQ,
• Help imported commodities pass CIQ inspection and quarantine
 
 

GB是中国国家标准的简称,GB为强制性国家标准,GB/T为推荐性国家标准;所有在中国产品和服务都必须符合GB国家标准;如果你的产品和服务要进口到中国,需确保其符合GB中国国标的要求;我们提供GB国标中文版英文版的查询检索,翻译,下载,购买等服务;
  • GB 中国国家标准检索 :GB
  • 标准代码 标准中英文名称 标准类别 订购
    GB 3883.12-2012 手持式电动工具的安全 第2部分:混凝土振动器的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for concrete vibrators
    GB
    国家标准

    GB/T 6075.2-2012 机械振动 在非旋转部件上测量评价机器的振动 第2部分:50MW以上,额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机
    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min
    GB
    国家标准

    GB 3883.20-2012 手持式电动工具的安全 第2部分:捆扎机的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for strapping tools
    GB
    国家标准

    GB/T 3965-2012 熔敷金属中扩散氢测定方法
    Determination of diffusible hydrogen in deposited metal
    GB
    国家标准

    GB 3883.2-2012 手持式电动工具的安全 第2部分:螺丝刀和冲击扳手的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches
    GB
    国家标准

    GB 3883.4-2012 手持式电动工具的安全 第2部分:非盘式砂光机和抛光机的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sanders and polishers other than disk type
    GB
    国家标准

    GB 3883.6-2012 手持式电动工具的安全 第2部分:电钻和冲击电钻的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for drills and impact drills
    GB
    国家标准

    GB 3883.7-2012 手持式电动工具的安全 第2部分:锤类工具的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for hammers
    GB
    国家标准

    GB 3883.8-2012 手持式电动工具的安全 第2部分:电剪刀和电冲剪的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sheet metal shears and nibblers
    GB
    国家标准

    GB 3883.11-2012 手持式电动工具的安全 第2部分:往复锯(曲线锯、刀锯)的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws)
    GB
    国家标准

    GB 4706.64-2012 家用和类似用途电器的安全 第2部分:剪刀型草剪的专用要求
    Safety of household and similar electrical appliances - Part 2: Particular requirements for scissor type grass shears
    GB
    国家标准

    GB 3883.19-2012 手持式电动工具的安全 第2部分:管道疏通机的专用要求
    Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for drain cleaners
    GB
    国家标准

    GB/T 11264-2012 热轧轻轨
    Hot-rolled light rails
    GB
    国家标准

    GB/T 1234-2012 高电阻电热合金
    High resistance alloys for electrical heating
    GB
    国家标准

    GB/T 12770-2012 机械结构用不锈钢焊接钢管
    Welded stainless steel tubes for mechanical structures
    GB
    国家标准

    GB/T 14975-2012 结构用不锈钢无缝钢管
    Seamless stainless steel tubes for structure
    GB
    国家标准

    GB/T 14999.1-2012 高温合金试验方法 第1部分:纵向低倍组织及缺陷酸浸检验
    Test method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch
    GB
    国家标准

    GB/T 14999.2-2012 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验
    Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch
    GB
    国家标准

    GB/T 14999.3-2012 高温合金试验方法 第3部分:棒材纵向断口检验
    Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars
    GB
    国家标准

    GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定
    Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings
    GB
    国家标准


    找到:54176条记录   | 首页-前页-后页 -尾页  | [1337] [1338] [1339] [1340] [1341] [1342] [1343]