中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 17850.9-2021
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分:十字石(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite
  GB/T 2975-2018
钢及钢产品 力学性能试验取样位置及试样制备(中英文版)
Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
  GB/T 17850.4-2017
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag
  GB/T 17850.1-2017
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分:导则和分类(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification
  GB/T 18838.2-2017
涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁砂(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit
  GB/T 17850.5-2017
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag
  GB/T 17850.7-2017
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide
  GB/T 25774.2-2016
焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验(中英文版)
Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel
  GB/T 18838.5-2015
涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分:钢丝切丸(中英文版)
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot
  GB/T 30790.4-2014
色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第4部分:表面类型和表面处理(中英文版)
Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 4: Types of surface and surface preparation
  GB/T 8923.4-2013
涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分:与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级(中英文版)
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting
  GB/T 13288.4-2013
涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法(中英文版)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p
  SY/T 0407-2012
涂装前钢材表面处理规范(中英文版)
Specification of steel surface preparation before application of paint
  GB/T 13288.2-2011
涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法(中英文版)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
  GB/T 17850.6-2011
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣(中英文版)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag
  GB/T 8923.1-2011
涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分:未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级(中英文版)
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
  GB/T 17850.11-2011
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分:钢渣特种型砂(中英文版)
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag
  GB/T 18570.6-2011
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版)
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method
  GB/T 26935-2011
集装箱钢材表面处理和涂料施工规范(中英文版)
Preparation of steel substrates and paints application for freight containers
  GB/T 25774.1-2010
焊接材料的检验 第1部分:钢、镍及镍合金熔敷金属力学性能试样的制备及检验(中英文版)
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys

找到:58條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3