中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 41931-2022 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验(中英文版) Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test |
|||
GB/T 5568-2022 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验(中英文版) Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection |
|||
GB/T 38687-2020 橡胶塑料机械 外围设备通信协议(中英文版) Rubber and plastics machinery—Communicating protocol for auxiliary equipment |
|||
GB/T 25156-2020 橡胶塑料注射成型机通用技术要求及检测方法(中英文版) General specifications and inspection methods of rubber and plastics injection moulding machines |
|||
GB/T 38533-2020 橡胶塑料注射成型机 模具固定和联接尺寸(中英文版) Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions |
|||
GB/T 39483.2-2020 橡胶塑料注射成型机 接口 第2部分:数据交换接口(中英文版) Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface |
|||
GB/T 39483.1-2020 橡胶塑料注射成型机 接口 第1部分:机械和电气接口(中英文版) Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface |
|||
GB/T 39327-2020 船用发动机湿式排气系统用橡胶和塑料软管 规范(中英文版) Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification |
|||
GB/T 39249-2020 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验(中英文版) Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test |
|||
GB/T 14905-2020 橡胶和塑料软管 各层间粘合强度的测定(中英文版) Rubber and plastics hoses—Determination of adhesion between components |
|||
GB/T 9576-2019 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南(中英文版) Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance |
|||
GB/T 36587-2018 橡胶塑料机械 术语(中英文版) Rubber and plastics machinery—Terminology |
|||
GB/T 9574-2017 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率(中英文版) Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure |
|||
GB/T 5565.3-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分:高温和低温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures |
|||
GB/T 5565.1-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分:室温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures |
|||
GB/T 5565.2-2017 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分:低于室温弯曲试验(中英文版) Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures |
|||
GB/T 12784-2017 橡胶塑料加压式捏炼机(中英文版) Pressurized kneader for rubber and plastics |
|||
GB/T 33580-2017 橡胶塑料挤出机能耗检测方法(中英文版) Testing and measuring methods of energy consumption for rubber and plastics extruder |
|||
GB/T 32456-2015 橡胶塑料机械用电磁加热节能系统通用技术条件(中英文版) General specifications for electromagnetic of induction heating energy-saving systems used for rubber and plastics machines |
|||
GB/T 5567-2013 橡胶和塑料软管及软管组合件 耐真空性能的测定(中英文版) Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum |
|||
GB/T 18422-2013 橡胶和塑料软管及软管组合件 透气性的测定(中英文版) Rubber and plastics hoses and hose assemblies—Determination of permeability to gas |
|||
GB/T 5563-2013 橡胶和塑料软管及软管组合件 静液压试验方法(中英文版) Rubber and plastics hoses and hose assemblies—Hydrostatic testing |
|||
GB/T 9572-2013 橡胶和塑料软管及软管组合件 电阻和导电性的测定(中英文版) Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity |
|||
GB/T 30200-2013 橡胶塑料注射成型机能耗检测方法(中英文版) Test method for energy consumption of rubber and plastics injection moulding machines |
|||
GB/T 5568-2013 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验(中英文版) Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing |
|||
GB 29993-2013 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法(中英文版) Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods |
|||
GB/T 18423-2013 橡胶和塑料软管及非增强软管 液体壁透性测定(中英文版) Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
|||
GB/T 9576-2013 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南(中英文版) Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance |
|||
GB/T 9575-2013 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差(中英文版) Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
|||
GB/T 9573-2013 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法(中英文版) Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
|||
GB/T 28605-2012 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件(中英文版) Rubber and plastics tubing and hoses and hose assemblies for drinking water |
|||
GB 25936.2-2012 橡胶塑料粉碎机械 第2部分:拉条式切粒机安全要求(中英文版) Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers |
|||
GB 25936.1-2012 橡胶塑料粉碎机械 第1部分:刀片式破碎机安全要求(中英文版) Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
|||
GB 25936.3-2012 橡胶塑料粉碎机械 第3部分:切碎机安全要求(中英文版) Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders |
|||
GB/T 7528-2011 橡胶和塑料软管及软管组合件 术语(中英文版) Rubber and plastics hoses and hose assemblies - Vocabulary |
|||
GB/T 14904-2011 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验(中英文版) Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
|||
GB 25936.4-2010 橡胶塑料粉碎机械 第4部分:团粒机安全要求(中英文版) Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
|||
GB 25431.1-2010 橡胶塑料挤出机和挤出生产线 第1部分:挤出机的安全要求(中英文版) Extruders and extrusion lines for rubber and plastics - Part 1: Safety requirements for extruders |
|||
GB 25431.3-2010 橡胶塑料挤出机和挤出生产线 第3部分:牵引装置的安全要求(中英文版) Extruders and extrusion lines for rubber and plastics - Part 3:Safety requirements for haul-offs |
|||
GB 25431.2-2010 橡胶塑料挤出机和挤出生产线 第2部分:模面切粒机的安全要求(中英文版) Extruders and extrusion lines for rubber and plastics - Part 2 :Safety requirements for die face pelletizers |
|||
GB/T 13578-2010 橡胶塑料压延机(中英文版) Rubber and plastics calender |
|||
GB/T 25270-2010 橡胶塑料的拉伸、屈挠和压缩试验设备(恒速移动型) 技术要求(中英文版) Rubber and plastics test equipment - Tensile,flexural and compression types(constant rate of traverse) - Specification |
|||
GB/T 25157-2010 橡胶塑料注射成型机检测方法(中英文版) Inspections methods of injection moulding machines for rubber and plastics |
|||
GB/T 25156-2010 橡胶塑料注射成型机通用技术条件(中英文版) General specifications of injection moulding machines for rubber and plastics |
|||
GB/T 24126-2009 橡胶和塑料软管及软管组合件 采购者、组装者、安装者和操作者使用指南(中英文版) Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel |
|||
GB/T 14905-2009 橡胶和塑料软管 各层间粘合强度的测定(中英文版) Rubber and plastics hoses - Determination of adhesion between components |
|||
GB/T 24133-2009 橡胶或塑料涂覆织物 调节和试验的标准环境(中英文版) Rubber-or plastics-coated fabrics - Standard atmospheres for conditioning and testing |
|||
GB/T 24134-2009 橡胶和塑料软管 静态条件下耐臭氧性能的评价(中英文版) Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
|||
GB/T 24144-2009 消防软管 橡胶和塑料吸引软管和软管组合件(中英文版) Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
|||
GB/T 6343-2009 泡沫塑料及橡胶 表观密度的测定(中英文版) Cellular plastics and rubbers - Determination of apparent density |
|||
GB 22530-2008 橡胶塑料注射成型机安全要求(中英文版) Safety requirements of injection moulding machines for rubber and plastics |
|||
GB/T 17200-2008 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范(中英文版) Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
|||
GB/T 14522-2008 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法 荧光紫外灯(中英文版) Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps |
|||
GB/T 15907-2008 橡胶和塑料软管 可燃性试验方法(中英文版) Rubber and plastics hoses - Method of test for flammability |
|||
GB/T 12722-2008 橡胶和塑料软管组合件 液压脉冲曲挠试验(半Ω试验)(中英文版) Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test(half-omega test) |
|||
GB/T 18943-2008 多孔橡胶与塑料 动态缓冲性能测定(中英文版) Cellular rubbers and plastics - Determination of dynamic cushioning performance |
|||
GB/T 3048.3-2007 电线电缆电性能试验方法 第3部分:半导电橡塑材料体积电阻率试验(中英文版) Test methods for electrical properties of electric cables and wires - Part 3:Test of volume resistivity of semi-conducting rubbers and plastics |
|||
GB/T 5564-2006 橡胶及塑料软管 低温曲挠试验(中英文版) Rubber and plastics hoses - Subambient temperature flexibility tests |
|||
GB/T 12833-2006 橡胶和塑料 撕裂强度和粘合强度测定中的多峰曲线分析(中英文版) Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength |
|||
GB/T 20463.2-2006 防水用橡胶或塑料涂覆织物 第2部分:防水透湿聚氨酯涂覆织物(中英文版) Rubber or plastics-coated fabrics for water-resistant clothing―Part 2: Waterproof and moisture penetrable polyurethane-coated fabric |
|||
GB/T 13577-2006 开放式炼胶机炼塑机(中英文版) Mill for rubber and plastics |
|||
GB 20055-2006 开放式炼胶机炼塑机安全要求(中英文版) Safety requirements of mill for rubber and plastics |
|||
GB/T 20024-2005 内燃机用橡胶和塑料燃油软管 可燃性试验方法(中英文版) Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability |
|||
GB/T 20023-2005 无气喷涂用橡胶和/或塑料软管及软管组合件(中英文版) Rubber and/or plastics hoses and hoses assemblies for airless paint spraying |
|||
GB/T 20025.2-2005 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a(中英文版) Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a |
|||
GB/T 20026-2005 橡胶和塑料软管 内衬层耐磨性测定(中英文版) Rubber and plastics hose -- Determination of abrasion of lining |
|||
GB/T 18949-2003 橡胶和塑料软管 动态条件下耐臭氧性能的评定(中英文版) Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions |
|||
GB/T 18950-2003 橡胶和塑料软管 静态下耐紫外线性能测定(中英文版) Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions |
|||
GB/T 9577-2001 橡胶和塑料软管及软管组合件 标志、包装和运输规则(中英文版) Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation |
|||
GB/T 9574-2001 橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率(中英文版) Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure |
|||
GB/T 18424-2001 橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定(中英文版) Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance |
|||
GB/T 12783-2000 橡胶塑料机械产品型号编制方法(中英文版) Editorial nominating method for the modeldesignation of rubber and plastics machinery |
|||
GB/T 18022-2000 声学 1~10 MHz频率范围内橡胶和塑料纵波声速与衰减系数的测量方法(中英文版) Acoustics--Methods for measuring the longitudinal sound speed and attenuation coefficient of rubbers and plastics in the frequency range 1 MHz to 10 MHz |
|||
GB/T 6342-1996 泡沫塑料与橡胶 线性尺寸的测定(中英文版) Cellular plastics and rubbers--Determination of linear dimensions |
|||
GB/T 12784-1991 橡胶塑料加压式捏炼机(中英文版) Dispersion mixer for rubber and plastics |
找到:75條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |