中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB 24545-2019 车辆车速限制系统技术要求及试验方法(中英文版) Requirements and test methods of speed limitation system for motor vehicles |
|||
GB/T 50123-2019 土工试验方法标准(中英文版) Standard for geotechnical testing method |
|||
GB/T 22079-2019 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则(中英文版) HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria |
|||
GB/T 7106-2019 建筑外门窗气密、水密、抗风压性能检测方法(中英文版) Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors |
|||
GB/T 8722-2019 炭素材料导热系数测定方法(中英文版) Test method for thermal conductivity of carbon materials |
|||
GB/T 15227-2019 建筑幕墙气密、水密、抗风压性能检测方法(中英文版) Test method of air permeability, watertightness, wind load resistance performance for curtain walls |
|||
GB/T 18802.351-2019 低压电涌保护器元件 第351部分:电信和信号网络的电涌隔离变压器(SIT)的性能要求和试验方法(中英文版) Components for low-voltage surge protective devices-Part 351:Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
|||
GB/T 8243.5-2018 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability |
|||
GB/T 36694-2018 土方机械 履带式推土机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for tractor-dozer—Test methods |
|||
GB/T 35961-2018 二氧化钛型硫磺回收催化剂物理性能试验方法(中英文版) Test method of physical properties for titanium oxide type sulfur recovery catalysts |
|||
GB/T 35931-2018 棉纤维棉结和短纤维率测试方法 光电法(中英文版) Test method for neps and short fiber content of cotton fibers—Photoelectric analyser |
|||
GB/T 16258-2018 棉纤维含糖试验方法 分光光度法(中英文版) Test method for sugar in cotton fibers—Spectrophotometry |
|||
GB/T 6098-2018 棉纤维长度试验方法 罗拉式分析仪法(中英文版) Test method for length of cotton fibres—Roller analyser |
|||
GB/T 35934-2018 棉花 染色色差试验方法(中英文版) Cotton—Test method for differential dyeing behavior |
|||
GB/T 16155-2018 民用水暖煤炉性能试验方法(中英文版) Test method for performance of civil water heating coal stove |
|||
GB/T 1452-2018 夹层结构平拉强度试验方法(中英文版) Test method for flatwise tension strength of sandwich constructions |
|||
GB/T 26548.1-2018 手持便携式动力工具 振动试验方法 第1部分:角式和端面式砂轮机(中英文版) Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 1:Angle and vertical grinders |
|||
GB/T 36024-2018 金属材料 薄板和薄带 十字形试样双向拉伸试验方法(中英文版) Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece |
|||
GB/T 17737.203-2018 同轴通信电缆 第1-203部分:环境试验方法 电缆的渗水试验(中英文版) Coaxial communication cables—Part 1-203: Environmental test methods—Test for water penetration of cable |
|||
GB/T 36696-2018 土方机械 轮胎式装载机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for wheel loader —Test methods |
|||
GB/T 4937.15-2018 半导体器件 机械和气候试验方法 第15部分:通孔安装器件的耐焊接热(中英文版) Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices |
|||
GB/T 35937-2018 家用和类似用途饮用水处理装置性能测试方法(中英文版) Household and similar drinking water purifier performance test method |
|||
GB/T 8243.15-2018 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings |
|||
GB/T 35839-2018 无损检测 工业计算机层析成像(CT)密度测量方法(中英文版) Non-destructive testing—Test method for measuring industrial computed tomography (CT) density |
|||
GB/T 35843-2018 纤维增强混凝土及其制品的纤维含量试验方法(中英文版) Test method of fiber content of fiber reinforced concrete and its product |
|||
GB/T 26857.4-2018 信息技术 开放系统互连 测试方法和规范(MTS) 测试和测试控制记法 第3版 第4部分:TTCN-3操作语义(中英文版) Information technology—Open systems interconnection—Methods for testing and specification(MTS)—The testing and test control notation—Version 3一Part 4: TTCN-3 operational semantics |
|||
GB/T 37207-2018 镍钴锰酸锂电化学性能测试-放电平台容量比率及循环寿命测试方法(中英文版) Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life |
|||
GB/T 35804-2018 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法(中英文版) Rubber, vulcanized or thermoplastic-Resistance to ozone cracking-Test methods for determining the ozone concentration in laboratory test chambers |
|||
GB 36581-2018 汽车车轮安全性能要求及试验方法(中英文版) Safety performance requirements and test methods of automobile wheels |
|||
GB/T 36613-2018 发光二极管芯片点测方法(中英文版) Probe test method for light emitting diode chips |
|||
GB/T 17737.302-2018 同轴通信电缆 第1-302部分:机械试验方法 偏心度试验(中英文版) Coaxial communication cables—Part 1-302: Mechanical test methods—Test for eccentricity |
|||
GB/T 36644-2018 信息安全技术 数字签名应用安全证明获取方法(中英文版) Information security technology—Methods for obtaining security attestations for digital signature applications |
|||
GB/T 17737.107-2018 同轴通信电缆 第1-107部分:电气试验方法 电缆颤噪电荷电平(机械感应噪声)试验(中英文版) Coaxial communication cables—Part 1-107: Electrical test methods—Test for cable microphony charge level (mechanically induced noise) |
|||
GB/T 27896-2018 天然气中水含量的测定 电子分析法(中英文版) Test method for water vapor content of natural gas—Electronic moisture analyzers |
|||
GB/T 36695-2018 土方机械 液压挖掘机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for hydraulic excavator—Test methods |
|||
GB/T 36654-2018 76GHz车辆无线电设备射频指标技术要求及测试方法(中英文版) RF technical requirements and test methods for 76GHz vehicle radio equipment |
|||
GB/T 24156-2018 电动摩托车和电动轻便摩托车 动力性能 试验方法(中英文版) Electric motorcycles and electric mopeds—Power performance—Test method |
|||
GB/T 36766-2018 铂钯系脱氧剂脱氧性能试验方法(中英文版) Performance test methods of deoxidation for Pt-Pd based deoxidation catalyst |
|||
GB/T 36655-2018 电子封装用球形二氧化硅微粉中α态晶体二氧化硅含量的测试方法 XRD法(中英文版) Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method |
|||
GB/T 4060-2018 硅多晶真空区熔基硼检验方法(中英文版) Test method for boron content in polycrystalline silicon by vacuum zone-melting method |
|||
GB/T 36495-2018 烧结砖瓦原料物理性能试验方法(中英文版) Test method for physical properties of raw material of sintered brick and tile |
|||
GB/T 36874-2018 湿帘技术性能测试方法(中英文版) Test method for technical performance of cooling pad |
|||
GB/T 36585-2018 外墙外保温系统动态风压试验方法(中英文版) Method of dynamic wind uplift test for external thermal insulation composite systems |
|||
GB/T 17737.317-2018 同轴通信电缆 第1-317部分:机械试验方法 电缆抗压试验(中英文版) Coaxial communication cables—Part 1-317: Mechanical test methods—Test for crush resistance of cable |
|||
GB/T 17737.314-2018 同轴通信电缆 第1-314部分:机械试验方法 电缆的弯曲试验(中英文版) Coaxial communication cables—Part 1-314: Mechanical test methods—Test for cable bending |
|||
GB/T 17737.301-2018 同轴通信电缆 第1-301部分:机械试验方法 椭圆度试验(中英文版) Coaxial communication cables—Part 1-301: Mechanical test methods—Test for ovality |
|||
GB/T 17737.108-2018 同轴通信电缆 第1-108部分:电气试验方法 特性阻抗、相位延迟、群延迟、电长度和传播速度试验(中英文版) Coaxial communication cables—Part 1-108: Electrical test methods—Test for characteristic impedance, phase and group delay, electrical length and propagation velocity |
|||
GB/T 17737.106-2018 同轴通信电缆 第1-106部分:电气试验方法 电缆护套的耐电压试验(中英文版) Coaxial communication cables—Part 1-106: Electrical test methods—Test for withstand voltage of cable sheath |
|||
GB/T 17737.101-2018 同轴通信电缆 第1-101部分:电气试验方法 导体直流电阻试验(中英文版) Coaxial communication cables—Part 1-101: Electrical test methods—Test for conductor d.c. resistance of cable |
|||
GB/T 17737.115-2018 同轴通信电缆 第1-115部分:电气试验方法 阻抗均匀性(脉冲/阶跃函数回波损耗)试验(中英文版) Coaxial communication cables—Part 1-115: Electrical test methods—Test for regularity of impedance (pulse/step function return loss) |
|||
GB/T 37255-2018 偏置电场下材料热释电系数测试方法(中英文版) Test method for pyroelectric coefficient of materials under DC bias field |
|||
GB/T 17737.308-2018 同轴通信电缆 第1-308部分:机械试验方法 铜包金属的抗拉强度和延伸率试验(中英文版) Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals |
|||
GB/T 17737.105-2018 同轴通信电缆 第1-105部分:电气试验方法 电缆介质的耐电压试验(中英文版) Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable dielectric |
|||
GB/T 17911-2018 耐火纤维制品试验方法(中英文版) Methods of test for refractory fibre products |
|||
GB/T 36580-2018 船舶螺旋桨空泡脉动压力模型试验方法(中英文版) Test method of model propeller for cavitation observation and pressure fluctuation measurement |
|||
GB/T 37201-2018 镍钴锰酸锂电化学性能测试-首次放电比容量及首次充放电效率测试方法(中英文版) Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle |
|||
GB/T 17737.104-2018 同轴通信电缆 第1-104部分:电气试验方法 电缆的电容稳定性试验(中英文版) Coaxial communication cables—Part 1-104: Electrical test methods—Test for capacitance stability of cable |
|||
GB/T 37126-2018 结构装配用建筑密封胶试验方法(中英文版) Test method for structural sealant glazing systems(SSGS) |
|||
GB/T 1557-2018 硅晶体中间隙氧含量的红外吸收测量方法(中英文版) Test method for determining interstitial oxygen content in silicon by infrared absorption |
|||
GB/T 36705-2018 氮化镓衬底片载流子浓度的测试 拉曼光谱法(中英文版) Test method for carrier concentration of gallium nitride substrates—Raman spectrum method |
|||
GB/T 17737.324-2018 同轴通信电缆 第1-324部分:机械试验方法 电缆耐磨性试验(中英文版) Coaxial communication cables—Part 1-324: Mechanical test methods—Test for abrasion resistance of cable |
|||
GB/T 17737.102-2018 同轴通信电缆 第1-102部分:电气试验方法 电缆介质绝缘电阻试验(中英文版) Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable dielectric |
|||
GB/T 20935.2-2018 金属材料 电磁超声检测方法 第2部分:利用电磁超声换能器技术进行超声检测的方法(中英文版) Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques |
|||
GB/T 36011-2018 可编程序控制器抽样检查和例行试验方法(中英文版) Sampling check and routine test method for programmable controller |
|||
GB/T 22517.7-2018 体育场地使用要求及检验方法 第7部分:网球场地(中英文版) Technical requirements and test methods for sports field—Part 7:Tennis |
|||
GB/T 19973.2-2018 医疗器械的灭菌 微生物学方法 第2部分:用于灭菌过程的定义、确认和维护的无菌试验(中英文版) Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition,validation and maintenance of a sterilization process |
|||
GB/T 15623.1-2018 液压传动 电调制液压控制阀 第1部分:四通方向流量控制阀试验方法(中英文版) Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1: Test methods for four-port directional flow-control valves |
|||
GB/T 35003-2018 非易失性存储器耐久和数据保持试验方法(中英文版) Test methods for endurance and data retention of non-volatile memory |
|||
GB/T 35005-2018 集成电路倒装焊试验方法(中英文版) Test methods for flip chip integrated circuits |
|||
GB/T 17737.318-2018 同轴通信电缆 第1-318部分:机械试验方法 热性能试验(中英文版) Coaxial communication cables—Part 1-318: Mechanical test methods—Heat performance tests |
|||
GB/T 33842.5-2018 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第5部分:人脸图像数据(中英文版) Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 5: Face image data |
|||
GB/T 17737.316-2018 同轴通信电缆 第1-316部分:机械试验方法 电缆的最大抗拉力试验(中英文版) Coaxial communication cables—Part 1-316:echanical test methods—Test for maximum pulling force of cable |
|||
GB/T 20485.33-2018 振动与冲击传感器校准方法 第33部分:磁灵敏度测试(中英文版) Methods for the calibration of vibration and shock transducers—Part 33: Testing of magnetic field sensitivity |
|||
GB/T 17737.103-2018 同轴通信电缆 第1-103部分:电气试验方法 电缆的电容试验(中英文版) Coaxial communication cables—Part 1-103: Electrical test methods—Test for capacitance of cable |
|||
GB/T 17737.310-2018 同轴通信电缆 第1-310部分:机械试验方法 铜包金属的扭转特性试验(中英文版) Coaxial communication cables—Part 1-310: Mechanical test methods—Test for torsion characteristics of copper-clad metals |
|||
GB/T 35856-2018 飞机电气设备绝缘电阻和耐电压试验方法(中英文版) Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment |
|||
GB/T 36012-2018 锄草机器人性能规范及其试验方法(中英文版) Performance criteria and related test methods of mechanical weeding robots |
|||
GB/T 17737.122-2018 同轴通信电缆 第1-122部分:电气试验方法 同轴电缆间串音试验(中英文版) Coaxial communication cables—Part 1-122: Electrical test methods—Test for cross-talk between coaxial cables |
|||
GB/T 14571.2-2018 工业用乙二醇试验方法 第2部分:纯度和杂质的测定 气相色谱法(中英文版) Test method of ethylene glycol for industrial use—Part 2: Determination of purity and impurities—Gas chromatography |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 37172-2018 接入网设备测试方法-EPON系统互通性(中英文版) Test methods for access network equipment—Interoperability of EPON system |
|||
GB/T 11023-2018 高压开关设备六氟化硫气体密封试验方法(中英文版) Test method of SF6 gas tightness for high—voltage switchgear |
|||
GB/T 2423.7-2018 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品)(中英文版) Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens |
|||
GB/T 10066.6-2018 电热和电磁处理装置的试验方法-第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 6:Test methods for the determination of power output of industrial microwave heating installations |
|||
GB/T 19921-2018 硅抛光片表面颗粒测试方法(中英文版) Test method for particles on polished silicon wafer surfaces |
|||
GB/T 15818-2018 表面活性剂生物降解度试验方法(中英文版) Test method for biodegradability of surfactants |
|||
GB/T 26985-2018 原油倾点的测定(中英文版) Standard test method for pour point of crude oils |
|||
GB/T 14235.1-2018 熔模铸造低温模料-第1部分:物理性能试验方法(中英文版) Low temperature pattern wax material for investment casting—Part 1: Testing methods for physical properties |
|||
GB/T 37213-2018 硅晶锭尺寸的测定-激光法(中英文版) Test method for silicon brick dimension—Laser technology method |
|||
GB/T 37174-2018 接入网设备测试方法-GPON系统互通性(中英文版) Test methods for access network—Interoperability of GPON system |
|||
GB/T 5170.19-2018 环境试验设备检验方法-第19部分:温度、振动(正弦)综合试验设备(中英文版) Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment |
|||
GB/T 36965-2018 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法(中英文版) Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry(DSC) |
|||
GB/T 36966-2018 公共预警短消息业务测试方法(中英文版) Test method of short message service for public early warning |
|||
GB/T 37049-2018 电子级多晶硅中基体金属杂质含量的测定-电感耦合等离子体质谱法(中英文版) Test method for the content of metal impurity in electronic grade polysilicon—Inductively coupled-plasma mass spectrometry method |
|||
GB/T 37052-2018 光伏建筑一体化(BIPV)组件电池额定工作温度测试方法(中英文版) Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules |
|||
GB/T 37206-2018 有机分离膜抗菌性能测试方法(中英文版) Test method for antibacterial properties of organic separation membrane |
|||
GB/T 37250-2018 氧传感器用功能陶瓷响应时间试验方法(中英文版) Test method for response time of functional ceramics for oxygen sensor |
|||
GB/T 37253-2018 氧传感器用功能陶瓷离子电导率试验方法(中英文版) Test method for ionic conductivity of functional ceramics for oxygen sensor |
|||
GB/T 14235.2-2018 熔模铸造低温模料-第2部分:使用性能试验方法(中英文版) Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties |
|||
GB/T 36986-2018 汽车制动性能动态检测方法(中英文版) Dynamic testing methods of brake performance for automobiles |
|||
GB/T 36984-2018 外科植入物用多孔金属材料X射线CT检测方法(中英文版) X-ray CT testing method of the porous metal materials for surgical implant applications |
|||
GB/T 37246-2018 精细陶瓷抗热震性能试验方法(中英文版) Test method for thermal-shock resistance of fine ceramics |
|||
GB/T 37227.1-2018 制冷系统绩效评价与计算测试方法-第1部分:蓄能空调系统(中英文版) Evaluation method and testing method for energy performance of refrigerating systems-Part 1:Energy-storage air conditioning systems |
|||
GB/T 37090-2018 信息安全技术-病毒防治产品安全技术要求和测试评价方法(中英文版) Information security technology—Security technical requirements,testing and evaluation methods for antivirus products |
|||
GB/T 37132-2018 无线充电设备的电磁兼容性通用要求和测试方法(中英文版) General requirements and test methods of electromagnetic compatibility for wireless power transmission equipment |
|||
GB/T 37158-2018 无损检测-工业计算机层析成像(CT)检测最大可检测钢厚度测试方法(中英文版) Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT) |
|||
GB/T 37166-2018 无损检测-复合材料工业计算机层析成像(CT)检测方法(中英文版) Non-destructive testing—Test method of composite materials for industrial computed tomography (CT) |
|||
GB/T 7784-2018 机动往复泵试验方法(中英文版) Test methods for power reciprocating pump |
|||
GB/T 17737.112-2018 同轴通信电缆 第1-112部分:电气试验方法 回波损耗(阻抗一致性)试验(中英文版) Coaxial communication cables—Part 1-112: Electrical test methods—Test for return loss (uniformity of impedance) |
|||
GB/T 5170.16-2018 环境试验设备检验方法-第16部分:稳态加速度试验用离心机(中英文版) Inspection methods for environmental testing equipments—Part 16:Centrifugal machines for constant acceleration test |
|||
GB/T 36579-2018 自升式钻井平台悬臂梁负荷试验方法(中英文版) Load test method of cantilever system for self-elevating drilling unit |
|||
GB/T 37240-2018 晶体硅光伏组件盖板玻璃透光性能测试评价方法(中英文版) Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module |
|||
GB/T 37171-2018 含有菱形固体润滑剂的青铜板材技术要求和检验方法(中英文版) Specification and test methods for bronze plate containing diamond-shaped solid lubricant |
|||
GB/T 37275-2018 掺钕钇铝石榴石激光棒激光阈值及斜率效率测量方法(中英文版) Test method for lasing threshold and slope efficiency of Nd:YAG laser rods |
|||
GB/T 6113.105-2018 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分:无线电骚扰和抗扰度测量设备-5MHz~18GHz天线校准场地和参考试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
|||
GB/T 5170.13-2018 环境试验设备检验方法-第13部分:振动(正弦)试验用机械式振动系统(中英文版) Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test |
|||
GB/T 5170.15-2018 环境试验设备检验方法-第15部分:振动(正弦)试验用液压式振动系统(中英文版) Inspection methods for environmental testing equipments—Part 15:Hydraulic vibrating type system for vibration(sinusoidal) test |
|||
GB/T 36987-2018 汽车防抱制动系统(ABS)性能检测方法(中英文版) Testing methods of anti lock braking system(ABS) performance for automobiles |
|||
GB/T 36977-2018 土方机械-轮胎式叉装机-试验方法(中英文版) Earth-moving machinery —Forklift wheel loader—Methods of tests |
|||
GB/T 36422-2018 化学纤维 微观形貌及直径的测定 扫描电镜法(中英文版) Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method |
|||
GB/T 36267-2018 钢化玻璃单位产品能耗测试方法(中英文版) Test method of energy consumption per unit products for tempered glass |
|||
GB/T 35015-2018 气瓶外测法水压试验用标准瓶的标定方法(中英文版) Calibration method for calibrated cylinder used in water jacket hydrostatic test |
|||
GB/T 35054-2018 选煤用重介质旋流器工艺性能试验方法及判定规则(中英文版) Process performance test method and decision rule for coal separating in heavy medium cyclones |
|||
GB/T 36268-2018 夹层玻璃单位产品能耗测试方法(中英文版) Test method of energy consumption per unit products for laminated glass |
|||
GB/T 34542.2-2018 氢气储存输送系统 第2部分:金属材料与氢环境相容性试验方法(中英文版) Storage and transportation systems for gaseous hydrogen—Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere |
|||
GB/T 36159-2018 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择(中英文版) Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications |
|||
GB/T 25442-2018 旋转电机(牵引电机除外)确定损耗和效率的试验方法(中英文版) Standard methods for determining losses and efficiency of rotation electrical machines from tests(excluding machines for traction vehicles) |
|||
GB/T 36264-2018 超高温氧化环境下纤维复合材料拉伸强度试验方法(中英文版) Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment |
|||
GB/T 36509-2018 滑翔伞结构强度要求及测试方法(中英文版) Requirements and testing methods of structure strength for paraglider |
|||
GB/T 34542.3-2018 氢气储存输送系统 第3部分:金属材料氢脆敏感度试验方法(中英文版) Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) |
|||
GB/T 3294-2018 鞋楦尺寸检测方法(中英文版) Test method of inspection for last sizes |
|||
GB/T 12684-2018 工业硼化物 分析方法(中英文版) Boron compound for industrial use—Methods of test |
|||
GB/T 36212-2018 无损检测 地下金属构件水泥防护层胶结声波检测及结果评价(中英文版) Non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component |
|||
GB/T 36403-2018 红外光学玻璃红外透过率测试方法 傅里叶变换法(中英文版) Test methods of infrared transmittance for infrared optical glass—Fourier transform method |
|||
GB/T 37247-2018 光催化材料及制品抗真菌性能测试方法及评价(中英文版) Test method for evaluating antifungal activity of photocatalytic materials and products |
|||
GB/T 36978-2018 土方机械-轮胎式叉装机燃油消耗量-试验方法(中英文版) Earth-moving machinery — Fuel consumption for forklift wheel loader — Test methods |
|||
GB/T 36798-2018 浸胶线绳、帘线、纱线直径和定长度重量试验方法(中英文版) Test methods of diameter and weight of fixed length for dipped cords and yarns |
|||
GB/T 36355-2018 信息技术 固态盘测试方法(中英文版) Information technology—Test method of solid state disk |
|||
GB/T 26068-2018 硅片和硅锭载流子复合寿命的测试-非接触微波反射光电导衰减法(中英文版) Test method for carrier recombination lifetime in silicon wafers and silicon ingots—Non-contact measurement of photoconductivity decay by microwave reflectance method |
|||
GB/T 1550-2018 非本征半导体材料导电类型测试方法(中英文版) Test methods for conductivity type of extrinsic semiconducting materials |
|||
GB/T 37200-2018 反渗透和纳滤装置渗漏检测方法(中英文版) Test methods for detecting leaks in reverse osmosis and nanofiltration devices |
|||
GB/T 4059-2018 硅多晶气氛区熔基磷检验方法(中英文版) Test method for phosphorus content in polycrystalline silicon by zone-melting method under controlled atmosphere |
|||
GB/T 36137-2018 中空纤维超滤膜和微滤膜组件完整性检验方法(中英文版) Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module |
|||
GB/T 30197-2018 工程机械轮胎作业能力测试方法-转鼓法(中英文版) Test method for work capacity of earth-mover tyres—Drum method |
|||
GB/T 35017-2018 连续搬运设备 散状物料分类、符号、性能及测试方法(中英文版) Continuous handing equipment - Bulk Solids Chassification, Symbol, Performance and Test methods |
|||
GB/T 13477.12-2018 建筑密封材料试验方法-第12部分:同一温度下拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants-Part 12:Determination of adhesion/cohesion properties at constant temperature |
|||
GB/T 2423.61-2018 环境试验-第2部分:试验方法-试验和导则:大型试件砂尘试验(中英文版) Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen |
|||
GB/T 36952-2018 平板显示器(FPD)偏光膜表面耐划伤性的测试方法(中英文版) Test method for surface scratch resistance of flat panel display(FPD)polarizing film |
|||
GB/T 36230-2018 数控闭式多连杆压力机 性能要求与试验方法(中英文版) CNC Straight-side link-drive press—Performance requirements and test methods |
|||
GB/T 36361-2018 LED加速寿命试验方法(中英文版) Accelerated life test method for LED |
找到:1058條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1] [2] [3] [4] [5] [6] [7] |