中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 19466.3-2004 塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定(中英文版) Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization |
|||
GB/T 1634.2-2004 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料(中英文版) Plastics--Determination of temperature of deflection under load--Part 2:Plastics,ebonite and long-fibre-reinforced composites |
|||
GB/T 19466.2-2004 塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定(中英文版) Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature |
|||
GB/T 12690.5-2003 稀土金属及其氧化物中非稀土杂质化学分析方法 铝、铬、锰、铁、钴、镍、铜、锌、铅的测定 电感耦合等离子体发射光谱法(方法1) 钴、锰、铅、镍、铜、锌、铝、铬的测定 电感耦合等离子(中英文版) Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、M |
|||
GB/T 12690.13-2003 稀土金属及其氧化物中非稀土杂质化学分析方法 钼、钨量的测定 电感耦合等离子体发射光谱法和电感耦合等离子体质谱法(中英文版) Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum |
|||
GB/T 12690.12-2003 稀土金属及其氧化物中非稀土杂质化学分析方法 钍量的测定 偶氮胂III分光光度法和电感耦合等离子体质谱法(中英文版) Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method |
|||
GB/T 19380-2003 水源性高碘地区和地方性高碘甲状腺肿病区的划定(中英文版) Determination and classification of the areas of high water iodine and the endemic areas of iodine excessgoiter |
|||
GB/T 12000-2003 塑料暴露于湿热、水喷雾和盐雾中影响的测定(中英文版) Determination of the effects of exposure to damp heat,water spray and salt mist for plastics |
|||
GB/T 9350-2003 塑料 氯乙烯均聚和共聚树脂水萃取液pH值的测定(中英文版) Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract |
|||
GB/T 19280-2003 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验)(中英文版) Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) |
|||
GB/T 19276.2-2003 水性培养液中材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法(中英文版) Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by analysis of evolved carbon dioxide |
|||
GB/T 19276.1-2003 水性培养液中材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量的方法(中英文版) Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by measuring the oxygen demand in a closed respirometer |
|||
GB/T 7755-2003 硫化橡胶或热塑性橡胶 透气性的测定(中英文版) Rubber,vulcanized of thermoplastic--Determination of permeability to gases |
|||
GB/T 12586-2003 橡胶或塑料涂覆织物 耐屈挠破坏性的测定(中英文版) Rubber or plastics-coated fabrics--Determination of resistance to damage by flexing |
|||
GB/T 8804.3-2003 热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材(中英文版) Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes |
|||
GB/T 8804.2-2003 热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材(中英文版) Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) |
|||
GB/T 8804.1-2003 热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则(中英文版) Thermoplastic pipes--Determination of tensile properties--Part 1: General test method |
|||
GB/T 9647-2003 热塑性塑料管材环刚度的测定(中英文版) Thermoplastics pipes--Determination of ringstiffness |
|||
GB/T 6594.2-2003 塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定(中英文版) Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties |
|||
GB/T 4548.2-2003 玻璃制品 玻璃容器内表面耐水侵蚀性能 用火焰光谱法测定和分级(中英文版) Glassware--Hydrolytic resistance of the interior surfaces of glass containers--Determination by flame spectrometry and classification |
|||
GB/T 2546.2-2003 塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定(中英文版) Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties |
|||
GB/T 18964.2-2003 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定(中英文版) Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties |
|||
GB/T 17037.4-2003 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定(中英文版) Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage |
|||
GB/T 7760-2003 硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法(中英文版) Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method |
|||
GB/T 18950-2003 橡胶和塑料软管 静态下耐紫外线性能测定(中英文版) Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions |
|||
GB/T 12587-2003 橡胶或塑料涂覆织物 抗压裂性的测定(中英文版) Rubber or plastics-coated fabrics--Determination of crush resistance |
|||
GB/T 18932.11-2002 蜂蜜中钾、磷、铁、钙、锌、铝、钠、镁、硼、锰、铜、钡、钛、钒、镍、钴、铬含量的测定方法 电感耦合等离子体原子发射光谱(ICP-AES)法(中英文版) Method for the determination of potassium,phosphorus,iron,calcium,zinc,aluminium,sodium,magnesium,boron,manganese,copper,barium,titanium,vanadium,nickel,cobalt,chromium contents in honey--Inductively coupled plasma atomic e |
|||
GB/T 13477.17-2002 建筑密封材料试验方法 第17部分:弹性恢复率的测定(中英文版) Test method for building sealants--Part 17:Determination of elastic recovery |
|||
GB/T 13477.15-2002 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定(中英文版) Test method for building sealants--Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water |
|||
GB/T 7139-2002 塑料 氯乙烯均聚物和共聚物 氯含量的测定(中英文版) Plastics--Vinyl chloride homopolymers and copolymers--Determination of chlorine content |
|||
GB/T 3400-2002 塑料 通用型氯乙烯均聚和共聚树脂 室温下增塑剂吸收量的测定(中英文版) Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature |
|||
GB/T 18743-2002 流体输送用热塑性塑料管材简支梁冲击试验方法(中英文版) Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method |
|||
GB/T 7142-2002 塑料长期热暴露后时间-温度极限的测定(中英文版) Determination of time-temperature limits for plastics after prolonged exposure to heat |
|||
GB/T 8802-2001 热塑性塑料管材、管件 维卡软化温度的测定(中英文版) Thermoplastics pipes and fitting--Determination of vicat softening temperature |
|||
GB/T 14152-2001 热塑性塑料管材耐外冲击性能试验方法 时针旋转法(中英文版) Thermoplastics pipes--Determination of resistance to external blows--Round-the-clock method |
|||
GB/T 6671-2001 热塑性塑料管材 纵向回缩率的测定(中英文版) Thermoplastics pipes--Determination of longitudinal reversion |
|||
GB/T 6673-2001 塑料薄膜和薄片长度和宽度的测定(中英文版) Plastics film and sheeting--Determination of length and width |
|||
GB/T 6672-2001 塑料薄膜和薄片厚度测定 机械测量法(中英文版) Plastics film and sheeting--Determination of thickness by mechanical scanning |
|||
GB/T 12585-2001 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法)(中英文版) Rubber,vulcanized or thermoplastic--Rubber sheet and rubber-coated fabric--Determination rate of volatile liquids(gravimetic technique) |
|||
GB/T 7129-2001 橡胶或塑料软管 容积膨胀的测定(中英文版) Rubber or plastics hoses--Determinationof volumetric expansion |
|||
GB/T 1663-2001 增塑剂结晶点的测定(中英文版) Plasticizers--Determination of crytallizing point |
|||
GB/T 1669-2001 增塑剂加热减量的测定(中英文版) Plasticizers--Determination of mass loss on heating |
|||
GB/T 6036-2001 硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验)(中英文版) Rubber,vulcanized or thermoplastic--Determination of low temperature stiffening(Gehman test) |
|||
GB/T 18424-2001 橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定(中英文版) Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance |
|||
GB/T 3682-2000 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定(中英文版) Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
|||
GB/T 1633-2000 热塑性塑料维卡软化温度(VST)的测定(中英文版) Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) |
|||
GB/T 18042-2000 热塑性塑料管材蠕变比率的试验方法(中英文版) Thermoplastics pipes--Determination of creep ratio |
|||
GB/T 1038-2000 塑料薄膜和薄片气体透过性试验方法 压差法(中英文版) Plastics--Film and sheeting--Determination of gas transmission--Differential-pressure method |
|||
GB/T 479-2000 烟煤胶质层指数测定方法(中英文版) Determination of plastometric indices of bituminous coal |
|||
GB/T 17669.3-1999 建筑石膏 力学性能的测定(中英文版) Gypsum plasters--Determination of mechanicalproperties |
|||
GB/T 17669.4-1999 建筑石膏 净浆物理性能的测定(中英文版) Gypsum plasters--Determination of physical properties of pure paste |
|||
GB/T 17669.5-1999 建筑石膏 粉料物理性能的测定(中英文版) Gypsum plasters--Determination of physical properties of powder |
|||
GB/T 17669.2-1999 建筑石膏 结晶水含量的测定(中英文版) Gypsum plasters--Determination of water of crystallization content |
|||
GB/T 17599-1998 防护服用织物 防热性能 抗熔融金属滴冲击性能的测定(中英文版) Protective clothine--Heatproof behaviour--Determination of behaviour of materials on impact of small splashes of molten metal |
|||
GB/T 17558-1998 照相闪光照明光源光谱分布指数(ISO/SDI)的测定(中英文版) Camera flash illuminants--Determination of spectral distribution index(ISO/SDI) |
|||
GB/T 9872-1998 氧瓶燃烧法测定橡胶和橡胶制品中溴和氯的含量(中英文版) Rubber and rubber products--Determination of bromine and chlorine content--Oxygen flask combustion technique |
|||
GB/T 6031-1998 硫化橡胶或热塑性橡胶硬度的测定(10~100 IRHD)(中英文版) Rubber,vulcanized or thermoplastic--Determination of hardness (hardness between 10IRHD and 100 IRHD) |
|||
GB/T 17476-1998 使用过的润滑油中添加剂元素、磨损金属和污染物以及基础油中某些元素测定法(电感耦合等离子体发射光谱法)(中英文版) Standard test method for determination of additiveelements,wear metals,and contaminants in used lubricanting oils and determination of selected elements in base oils by inductively coupled plasmaatomic emission spectrometry(ICP-AES) |
|||
GB/T 16920-1997 玻璃 平均线热膨胀系数的测定(中英文版) Glass--Determination of coefficient of mean linear thermal expansion |
|||
GB/T 6342-1996 泡沫塑料与橡胶 线性尺寸的测定(中英文版) Cellular plastics and rubbers--Determination of linear dimensions |
|||
GB/T 15777-1995 木材顺纹抗压弹性模量测定方法(中英文版) Method for determination of the modulus of elasticity in compressive parallel to grain of wood |
|||
GB/T 1664-1995 增塑剂外观色度的测定(中英文版) Plasticizers--Determination of colour |
|||
GB/T 15048-1994 硬质泡沫塑料压缩蠕变试验方法(中英文版) Cellular plastics,rigid--Determination of compressive creep |
|||
GB/T 2680-1994 建筑玻璃 可见光透射比、太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定(中英文版) Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors |
|||
GB/T 14520-1993 气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量(中英文版) Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography |
|||
GB/T 13987-1992 照相用电子闪光装置闪光指数的确定(中英文版) Determination of flash guide numbers for electronic photoflash equipment |
|||
GB/T 13937-1992 分级用硫化橡胶动态性能的测定 强迫正弦剪切应变法(中英文版) Rubber--Determinationof dynamic properties of vulcanizates for classification purposes (by forced sinusoidal shear strain) |
|||
GB/T 13580.4-1992 大气降水pH值的测定 电极法(中英文版) Determination of pH value of the wet precipitation--Glass electrode method |
|||
GB/T 13455-1992 氨基模塑料挥发物测定方法(中英文版) Plastics--Aminoplastic moulding materials--Determination of volatile matter |
|||
GB/T 13220-1991 细粉末粒度分布的测定 声波筛分法(中英文版) Determination of particle size distribution of fine powder--Method of sieve classfication with sonic wave |
|||
GB/T 11998-1989 塑料玻璃化温度测定方法 热机械分析法(中英文版) Determination of glass transitiontemperature of plastics--Thermomechanical analysis |
|||
GB/T 10006-1988 塑料薄膜和薄片摩擦系数测定方法(中英文版) Plastics--Film and sheeting--Determination of the coefficients of friction |
|||
GB/T 267-1988 石油产品闪点与燃点测定法 (开口杯法)(中英文版) Petroleum products--Determinationof flash and fire points--Open cup |
|||
GB/T 9347-1988 氯乙烯-乙酸乙烯酯共聚物中乙酸乙烯酯的测定方法(中英文版) Plastics--Vinyl chloride-vinyl acetate copolymers--Determination of vinyl acetate |
|||
GB/T 1672-1988 液体增塑剂体积电阻率的测定(中英文版) Liquid plasticizers--Determination of volume resisti-vity |
|||
GB/T 6920-1986 水质 pH值的测定 玻璃电极法(中英文版) Water quality--Determination of pH value--Glass electrode method |
|||
GB/T 6598-1986 小角激光光散射法测定聚苯乙烯标准样品的重均分子量(中英文版) Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method |
找到:827條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 |