中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 9343-2008
塑料燃烧性能试验方法 闪燃温度和自燃温度的测定(中英文版)
Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature
  GB/T 4610-2008
塑料 热空气炉法点着温度的测定(中英文版)
Plastics - Determination of ignition temperature using a hot-air furnace
  GB/T 15928-2008
不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定(中英文版)
Reinforced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content
  GB/T 5258-2008
纤维增强塑料面内压缩性能试验方法(中英文版)
Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction
  GB/T 3365-2008
碳纤维增强塑料孔隙含量和纤维体积含量试验方法(中英文版)
Carbon fiber reinforced plastics - Determination of void content and fiber volume content
  GB/T 10294-2008
绝热材料稳态热阻及有关特性的测定 防护热板法(中英文版)
Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus
  GB/T 18654.14-2008
养殖鱼类种质检验 第14部分:DNA含量的测定(中英文版)
Inspection of germplasm for cultured fishes - Part 14:Determination of DNA content in somatic cell
  GB/T 18654.11-2008
养殖鱼类种质检验 第11部分:肌肉中主要氨基酸含量的测定(中英文版)
Inspection of germplasm for cultured fishes - Part 11:Determination of amino acids content in muscle
  GB/T 8661-2008
塑料 苯乙烯-丙烯腈共聚物残留丙烯腈单体含量的测定 气相色谱法(中英文版)
Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
  GB/T 2412-2008
塑料 聚丙烯(PP)和丙烯共聚物热塑性塑料等规指数的测定(中英文版)
Plastics - Polypropylene(PP) and propylene copolymer thermoplastics - Determination of isotactic index
  GB/T 22040-2008
公路沿线设施塑料制品耐候性要求及测试方法(中英文版)
Technical requirements and determination of weathering quality for plastics of highway furnatures
  GB/T 1671-2008
增塑剂闪点的测定 克利夫兰开口杯法(中英文版)
Plasticizers - Determination of flash point - Cleveland open cup method
  GB/T 1665-2008
增塑剂皂化值及酯含量的测定(中英文版)
Plasticizers - Determination of saponification value and ester-content
  GB/T 22047-2008
土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法(中英文版)
Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
  GB/T 6150.7-2008
钨精矿化学分析方法 钽铌量的测定 等离子体发射光谱法和分光光度法(中英文版)
Methods for chemical analysis of tungsten concentrates - Determination of tantalum content and niobium content - Inductively coupled plasma emission spectrometry and spectrophotometry
  GB/T 4324.8-2008
钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法(中英文版)
Methods for chemical analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry
  GB/T 4324.15-2008
钨化学分析方法 镁量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法(中英文版)
Methods for chemical analysis of tungsten - Determination of magnesium content - The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
  GB/T 4324.13-2008
钨化学分析方法 钙量的测定 电感耦合等离子体原子发射光谱法(中英文版)
Methods for chemical analysis of tungsten - Determination of calcium content - The inductively coupled plasma atomic emission spectrometry
  GB/T 529-2008
硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样)(中英文版)
Rubber,vulcanized or thermoplastic - Determination of tear strength(Trouser,angle and crescent test pieces)
  GB/T 9870.2-2008
硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法(中英文版)
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies

找到:1383條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [43] [44] [45] [46] [47] [48] [49]