中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  YD/T 1515-2006
ipv6路由协议--支持ipv6的中间系统到中间系统路由交换协议(is-is)(中英文版)
Technical Specification for IPv6 Routing Protocol. Intermediate System to Intermediate System Intra-domain Routing Information Exchange Protocol (IS-IS)for IPv6 Routing Protocol
  YD/T 1532-2006
基于软交换的综合接入设备测试方法(中英文版)
Test Specification for IAD Based on Softswitch
  YD/T 1518-2006
ip电话接入设备互通技术要求和测试方法--h.248协议(中英文版)
Interoperability Specification and Test Measurement for VoIP Accessing Equipment Based H.248
  YD/T 1520-2006
ip电话接入设备互通技术要求和测试方法--h.323协议(中英文版)
Interoperability Specification and test measurement for H.323 based VoIP accessing equipment
  YD/T 1519-2006
ip电话接入设备互通技术要求和测试方法--媒体网关控制协议(mgcp)(中英文版)
Interoperability Specification and Test Measurement for VoIP Accessing Equipment based on MGCP
  JJF 1158-2006
稳定同位素气体质谱仪校准规范(中英文版)
Calibration Specification for Stable Isotope Gas Mass Spectrometer
  GB/T 4170-2006
塑料注射模零件技术条件(中英文版)
Specification of components of injection moulds for plastics
  JJF 1164-2006
台式气相色谱-质谱联用仪校准规范(中英文版)
Calibration Specification for Bench Top Gas Chromatography-Mass Spectrometers
  JJF 1159-2006
四极杆电感耦合等离子体质谱仪校准规范(中英文版)
Calibration Specification for Quadrupole Inductively Coupled Plasma Mass Spectrometers
  GB/T 12556-2006
塑料注射模模架技术条件(中英文版)
Specification of injection mould bases for plastics
  GB/T 17574.11-2006
半导体器件 集成电路 第2-11部分:数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范(中英文版)
Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory
  GB/T 17574.9-2006
半导体器件 集成电路 第2-9部分:数字集成电路 紫外光擦除电可编程MOS只读存储器空白详细规范(中英文版)
Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories
  GB/T 18488.1-2006
电动汽车用电机及其控制器 第1部分:技术条件(中英文版)
The electrical machines and controllers for electric vehicles - Part 1:General specification
  SH/T 3066-2005
石油化工反应器再生框架设计规范(中英文版)
Design specification for frame of reactor and regenerator in petrochemical industry
  SH/T 3529-2005
石油化工厂区竖向工程施工及验收规范(中英文版)
Specification of construction and acceptance for vertical engineering in petrochemical plant
  SH/T 3070-2005
石油化工管式炉钢结构设计规范(中英文版)
Specification for design of steel structure of tubular heater in petrochemical industry
  HG 2367-2005
氯乙烯聚合反应釜技术条件(中英文版)
Specifications for vinyl chloride polymerize
  HG/T 3242-2005
橡胶门尼粘度计技术条件(中英文版)
Technical specifications for rubber Mooney viscometer
  HG/T 3243-2005
硫化橡胶拉伸应力松弛仪技术条件(中英文版)
Technical specifications for tensile stress relax meter of vulcanized rubber
  SH/T 3023-2005
石油化工厂内道路设计规范(中英文版)
Design specification for road in petrochemical engineering

找到:11158條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [388] [389] [390] [391] [392] [393] [394]