中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 11460-2009 信息技术 汉字字型要求和检测方法(中英文版) Information technology - Requirements and test method of the chinese ideograms font |
|||
DL/T 1105.1-2009 电站锅炉集箱小口径接管座角焊缝无损检测技术导则 第1部分:通用要求(中英文版) The technical guideline of non-destructive inspection for fillet of small diameter nozzle stubs on boiler headers in power stations. Part 1: General requirements |
|||
YY/T 0698.9-2009 最终灭菌医疗器械包装材料 第9部分:可密封组合袋、卷材和盖材生产用无涂胶聚烯烃非织造布材料 要求和试验方法(中英文版) Packaging materials for terminally sterilized medical devices. Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of sealable pouches, reels and lids. Requirements and test methods |
|||
YY/T 0698.3-2009 最终灭菌医疗器械包装材料 第3部分:纸袋(yy/t 0698.4所规定)、组合带和卷材(yy/t 0698.5所规定)生产用纸 要求和试验方法(中英文版) Packaging materials for terminal sterilized medical devices. Part 3: Paper for use in the manufacture of paper bags (specified in YY/T 0698.4) and in the manufacture of pouches and reels (specified in YY/T 0698.5). Requirements and test methods |
|||
YY/T 0698.10-2009 最终灭菌医疗器械包装材料 第10部分:可密封组合袋、卷材和盖材生产用涂胶聚烯烃非织造布材料 要求和试验方法(中英文版) Packaging materials for terminally sterilized medical devices. Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of sealable pouches, reels and lids. Requirements and test methods |
|||
YY 0635.4-2009 吸入式麻醉系统 第4部分:麻醉呼吸机(中英文版) Inhalational anaesthesia systems. Part 4: Requirements for anaesthetic ventilators |
|||
YY/T 0698.7-2009 最终灭菌医疗器械包装材料 第7部分:环氧乙烷或辐射灭菌屏障系统生产用可密封涂胶纸 要求和试验方法(中英文版) Packaging materials for terminal sterilized medical devices. Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods |
|||
YD/T 1924-2009 基于sip协议的ip用户终端设备技术要求(中英文版) The Requirements for SIP-Based IP User Terminal Device |
|||
YD/T 1931-2009 基于统一ims的业务技术要求 呼叫前转类业务(第一阶段)(中英文版) Technical Requirements of Services based on the Unified IMS Call Forwarding Service(Release 1) |
|||
YD/T 1930-2009 统一ims组网总体技术要求(第一阶段)(中英文版) General Technical Requirements of the Networkingfor the Unified IMS(Release1) |
|||
YD/T 1925-2009 基于h.248协议的ip用户终端设备技术要求(中英文版) The Requirements for H.248-Based IP User Terminal Device |
|||
YD/T 1929-2009 统一ims的需求(第一阶段)(中英文版) Requirements for the Unified IMS(Phase 1) |
|||
YD/T 1923-2009 基于mgcp协议的ip用户终端设备技术要求(中英文版) The Requirements for MECP-Based IP User Terminal Device |
|||
YD/T 1922-2009 基于h.323协议的ip用户终端设备技术要求(中英文版) The Requirements for H.323-Based IP user Terminal Device |
|||
YD/T 1889-2009 手柄电话助听器耦合技术要求和测量方法(中英文版) The Requirements of Hearing Aids Compatibility and Measurement Methods for Telephone Handset |
|||
YD/T 1927-2009 软交换业务接入控制设备技术要求(中英文版) Technical Requirements for the Softswitch Services Access Control Device |
|||
GB/T 1303.8-2009 电气用热固性树脂工业硬质层压板 第8部分:有机硅树脂硬质层压板(中英文版) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 8: Requirements for rigid laminated sheets based on silicone resins |
|||
GB/T 1303.10-2009 电气用热固性树脂工业硬质层压板 第10部分:双马来酰亚胺树脂硬质层压板(中英文版) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins |
|||
GB/T 1303.11-2009 电气用热固性树脂工业硬质层压板 第11部分:聚酰胺酰亚胺树脂硬质层压板(中英文版) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins |
|||
GB/T 1303.1-2009 电气用热固性树脂工业硬质层压板 第1部分:定义、分类和一般要求(中英文版) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
找到:923條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [26] [27] [28] [29] [30] [31] [32] |