中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 24218.18-2014 纺织品 非织造布试验方法 第18部分:断裂强力和断裂伸长率的测定(抓样法)(中英文版) Textiles―Test methods for nonwovens―Part 18: Determination of breaking strength and elongation (grab method) |
|||
GB/T 31352-2014 蓝宝石衬底片翘曲度测试方法(中英文版) Test methods for warp of sapphire substrates |
|||
GB/T 31353-2014 蓝宝石衬底片弯曲度测试方法(中英文版) Test methods for bow of sapphire substrates |
|||
GB/T 31071-2014 科技平台 一致性测试的原则与方法(中英文版) General science and technology infrastructure―Principles and methods for conformance testing |
|||
GB/T 31264-2014 结构用人造板力学性能试验方法(中英文版) Test methods for mechanical properties of structural wood-based panels |
|||
GB/T 30790.6-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分:实验室性能测试方法(中英文版) Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods |
|||
GB/T 29895-2013 横向振动法测试木质材料动态弯曲弹性模量方法(中英文版) Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration |
|||
GB/T 12642-2013 工业机器人 性能规范及其试验方法(中英文版) Industrial robots - Performance criteria and related test methods |
|||
GB 17578-2013 客车上部结构强度要求及试验方法(中英文版) Requirements and test methods of strength for the superstructure of bus |
|||
GB/T 28993-2012 结构用锯材力学性能测试方法(中英文版) Standard test methods for mechanical properties of structural lumber |
|||
GB/T 29247-2012 工业自动化仪表通用试验方法(中英文版) General methods for testing the performance of industrial process measurement and control instruments |
|||
GB/T 29046-2012 城镇供热预制直埋保温管道技术指标检测方法(中英文版) Test methods of technical specification for pre-insulated directly buried district heating pipes |
|||
GB/T 29417-2012 水泥砂浆和混凝土干燥收缩开裂性能试验方法(中英文版) Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete |
|||
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
|||
GB/T 14999.2-2012 高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验(中英文版) Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch |
|||
GB/T 28786-2012 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法(中英文版) Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test |
|||
GB/T 50329-2012 木结构试验方法标准(中英文版) Standard for test methods of timber structures |
|||
GB/T 28638-2012 城镇供热管道保温结构散热损失测试与保温效果评定方法(中英文版) Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes |
|||
GB/T 27693-2011 工业车辆安全 噪声辐射的测量方法(中英文版) Safety of industrial trucks - Test methods for measuring noise emissions |
|||
GB/T 27694-2011 工业车辆安全 振动的测量方法(中英文版) Safety of industrial trucks - Test methods for measuring vibration |
|||
GB/T 27595-2011 胶粘剂 结构胶粘剂拉伸剪切疲劳性能的试验方法(中英文版) Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear |
|||
GB/T 26948.1-2011 工业车辆驾驶员约束系统技术要求及试验方法 第1部分:腰部安全带(中英文版) Industrial trucks - Specifications and test methods for operator restraint systems - Part 1:Lap-type seat belts |
|||
GB/T 26681-2011 地面数字电视标准测试发射机技术要求和测量方法(中英文版) Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television |
|||
GB/T 1001.2-2010 标准电压高于1000V的架空线路绝缘子 第2部分:交流系统用绝缘子串及绝缘子串组 定义、试验方法和接收准则(中英文版) Insulators for overhead lines with a nominal voltage above 1000V - Part 2: Insulator strings and insulator sets for a.c.systems - Definitions, test methods and acceptance criteria |
|||
GB/T 24218.8-2010 纺织品 非织造布试验方法 第8部分:液体穿透时间的测定(模拟尿液)(中英文版) Textiles - Test methods for nonwovens - Part 8:Determination of liquid strike-through time (simulated urine) |
|||
GB/T 24218.3-2010 纺织品 非织造布试验方法 第3部分:断裂强力和断裂伸长率的测定(条样法)(中英文版) Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation (Strip method) |
|||
GB/T 24218.13-2010 纺织品 非织造布试验方法 第13部分:液体多次穿透时间的测定(中英文版) Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time |
|||
GB 16897-2010 制动软管的结构、性能要求及试验方法(中英文版) Brake hose - Structure, performance and test methods |
|||
GB/T 14999.6-2010 锻制高温合金双重晶粒组织和一次碳化物分布测定方法(中英文版) Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings |
|||
GB/T 25757-2010 无损检测 钢管自动漏磁检测系统综合性能测试方法(中英文版) Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes |
|||
GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法(中英文版) Basic environmental conditions and testing methods for transportation and storage of instruments |
|||
GB/T 19902.4-2010 工业自动化系统与集成 制造软件互操作性能力建规 第4部分:一致性测试方法、判则及报告(中英文版) Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
|||
GB/T 25148-2010 工业设备化学清洗中除垢率和洗净率测试方法(中英文版) Test methods of scale removal rate and detergence rate of chemical cleaning for industrial equipment |
|||
GB/T 25217.1-2010 冲击地压测定、监测与防治方法 第1部分:顶板岩层冲击倾向性分类及指数的测定方法(中英文版) Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata |
|||
GB/T 24518-2009 金属和合金的腐蚀 应力腐蚀室外暴露试验方法(中英文版) Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments |
|||
GB/T 24105-2009 岩土工程仪器基本环境试验条件及方法(中英文版) Basic conditions and methods of environmental test for geotechnical engineering instrument |
|||
GB/T 1303.2-2009 电气用热固性树脂工业硬质层压板 第2部分:试验方法(中英文版) Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods |
|||
GB/T 5132.2-2009 电气用热固性树脂工业硬质圆形层压管和棒 第2部分:试验方法(中英文版) Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
|||
GB/T 15823-2009 无损检测 氦泄漏检测方法(中英文版) Non-destructive testing - Test methods for helium leak testing |
|||
GB/T 13255.8-2009 工业用己内酰胺试验方法 第8部分:环己酮肟含量的测定(中英文版) Test methods of caprolactam for industrial use - Part 8: Determination of cyclohexanone oxime content |
|||
GB/T 13255.7-2009 工业用己内酰胺试验方法 第7部分:铁含量的测定(中英文版) Test methods of caprolactam for industrial use - Part 7: Determination of iron content |
|||
GB/T 13255.6-2009 工业用己内酰胺试验方法 第6部分:酸度或碱度的测定(中英文版) Test methods of caprolactam for industrial use - Part 6: Determination of acidity or alkalinity |
|||
GB/T 13255.5-2009 工业用己内酰胺试验方法 第5部分:290nm波长处吸光度的测定(中英文版) Test methods of caprolactam for industrial use - Part 5: Determination of absorbance at a wavelength of 290nm |
|||
GB/T 13255.4-2009 工业用己内酰胺试验方法 第4部分:挥发性碱含量的测定 蒸馏后滴定法(中英文版) Test methods of caprolactam for industrial use - Part 4: Determination of volatile bases content - Titrimetric method after distillation |
|||
GB/T 13255.3-2009 工业用己内酰胺试验方法 第3部分:高锰酸钾吸收值的测定 分光光度法(中英文版) Test methods of caprolactam for industrial use - Part 3: Determination of permanganate absorption number - Spectrometric method |
|||
GB/T 13255.2-2009 工业用己内酰胺试验方法 第2部分:结晶点的测定(中英文版) Test methods of caprolactam for industrial use - Part 2: Determination of crystallizing point |
|||
GB/T 13255.1-2009 工业用己内酰胺试验方法 第1部分:50%水溶液色度的测定 分光光度法(中英文版) Test methods of caprolactam for industrial use - Part 1: Determination of colourity of 50% aqueous caprolactam solution - Spectrometric method |
|||
GB/T 13917.3-2009 农药登记用卫生杀虫剂室内药效试验及评价 第3部分: 烟剂及烟片(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 3: Smoke generator and smoke tablet |
|||
GB/T 13917.10-2009 农药登记用卫生杀虫剂室内药效试验及评价 第10部分:模拟现场(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 10: Analogous site |
|||
GB/T 13917.2-2009 农药登记用卫生杀虫剂室内药效试验及评价 第2部分:气雾剂(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 2: Aerosol |
|||
GB/T 13917.4-2009 农药登记用卫生杀虫剂室内药效试验及评价 第4部分:蚊香(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 4: Mosquito coil |
|||
GB/T 13917.6-2009 农药登记用卫生杀虫剂室内药效试验及评价 第6部分:电热蚊香液(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 6: Liquid vaporizer |
|||
GB/T 13917.7-2009 农药登记用卫生杀虫剂室内药效试验及评价 第7部分:饵剂(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 7: Bait |
|||
GB/T 13917.8-2009 农药登记用卫生杀虫剂室内药效试验及评价 第8部分:粉剂、笔剂(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 8: Dutsable powder and chalk |
|||
GB/T 13917.9-2009 农药登记用卫生杀虫剂室内药效试验及评价 第9部分:驱避剂(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 9: Repellent |
|||
GB/T 13917.1-2009 农药登记用卫生杀虫剂室内药效试验及评价 第1部分: 喷射剂(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 1: Spray fluid |
|||
GB/T 13917.5-2009 农药登记用卫生杀虫剂室内药效试验及评价 第5部分: 电热蚊香片(中英文版) Laboratory efficacy test methods and criterions of public health insecticides for pesticide registration - Part 5: Vaporizing mat |
|||
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
|||
GB/T 18029.8-2008 轮椅车 第8部分:静态强度,冲击强度及疲劳强度的要求和测试方法(中英文版) Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
|||
GB/T 3903.29-2008 鞋类 外底试验方法 剖层撕裂力和层间剥离强度(中英文版) Footwear - Test methods for outsoles - Split tear strength and delamination resistance |
|||
GB/T 23159-2008 进出口婴幼儿学步带安全要求及测试方法(中英文版) Safety requirements and test methods of walking strap for babies and young children for import and export |
|||
GB/T 3903.43-2008 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear - Test methods for uppers, lining and insocks - Seam strength |
|||
GB/T 23155-2008 进出口儿童服装绳带安全要求及测试方法(中英文版) Safety requirements and test methods of drawstrings and cords on children’s clothing for import and export |
|||
GB/T 22638.7-2008 铝箔试验方法 第7部分:热封强度的测定(中英文版) Test methods for aluminium and aluminium alloy foils - Part 7: Determination of heat seal strength |
|||
GB/T 10066.6-2008 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output |
|||
GB/T 6384-2008 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法(中英文版) The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures |
|||
GB/T 16304-2008 压电陶瓷材料性能测试方法 电场应变特性的测试(中英文版) Test methods of the properties for piezoelectric ceramics - Test for relation between electric field and strain |
|||
GB/T 11387-2008 压电陶瓷材料性能测试方法 静态弯曲强度的测试(中英文版) Test methods for the properties of piezoelectric ceramics - Test for the static flexural strength |
|||
GB/T 17614.2-2008 工业过程控制系统用变送器 第2部分: 检查和例行试验方法(中英文版) Transmitters for use industrial-process control systems - Part 2: Methods for inspection and routine testing |
|||
GB/T 12954.1-2008 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法(中英文版) Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives |
|||
GB/T 9966.8-2008 天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法(中英文版) Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference |
|||
GB/T 3364-2008 碳纤维直径和根数试验方法(中英文版) Test methods for diameter of carbon fiber and filament number in carbon fiber strand |
|||
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|||
GB/T 2951.42-2008 电缆和光缆绝缘和护套材料通用试验方法 第42部分:聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi |
|||
GB/T 3903.24-2008 鞋类 鞋跟试验方法 持钉力(中英文版) Footwear - Test methods for heels - Heel pin holding strength |
|||
GB/T 3903.23-2008 鞋类 鞋跟和跟面试验方法 跟面结合力(中英文版) Footwear - Test methods for heels and top pieces - Top piece retention strength |
|||
GB/T 3903.22-2008 鞋类 外底试验方法 抗张强度和伸长率(中英文版) Footwear - Test methods for outsoles - Tensile strength and elongation |
|||
GB/T 3903.21-2008 鞋类 粘扣带试验方法 反复开合前后的剪切强度(中英文版) Footwear - Test methods for accessories:Touch and close fasteners - Shear strength before and after repeated closing |
|||
GB/T 3903.20-2008 鞋类 粘扣带试验方法 反复开合前后的剥离强度(中英文版) Footwear - Test methods for accessories:Touch and close fasteners - Peel strength before and after repeated closing |
|||
GB/T 9104-2008 工业硬脂酸试验方法(中英文版) Test methods for industrial stearic acids |
|||
GB/T 9984-2008 工业三聚磷酸钠试验方法(中英文版) Test methods for industrial sodium tripolyphosphate |
|||
GB/T 21839-2008 预应力混凝土用钢材试验方法(中英文版) Steel for prestressed concrete - Test methods |
|||
GB/T 12605-2008 无损检测 金属管道熔化焊环向对接接头射线照相检测方法(中英文版) Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
|||
GB/T 21814-2008 工业废水的试验方法 鱼类急性毒性试验(中英文版) Testing methods for industrial wastewater - Fish acute toxicity |
|||
GB/T 15972.33-2008 光纤试验方法规范 第33部分:机械性能的测量方法和试验程序 应力腐蚀敏感性参数(中英文版) Specifications for optical fibres test methods - Part 33: Measurement methods and test procedures for mechanical characteristics - Stress corrosion susceptibility |
|||
GB/T 15972.32-2008 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性(中英文版) Specifications for optical fibre test methods - Part 32: Measurement methods and test procedures for mechanical characteristics - Coating strippability |
|||
GB/T 15972.31-2008 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度(中英文版) Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength |
|||
GB/T 14785-2008 农林拖拉机和机械 车轮侧向负载疲劳试验方法(中英文版) Tractors and machiney for agricultural and forestry - Test methods of wheels side load fatigue |
|||
GB/T 21398-2008 农林机械 电磁兼容性 试验方法和验收规则(中英文版) Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
|||
GB/T 14786-2008 农林拖拉机和机械 驱动车轮扭转疲劳试验方法(中英文版) Tractors and machinery for agriculture and forestry - Test methods of the driving wheels torsion fatigue |
|||
GB/T 11606-2007 分析仪器环境试验方法(中英文版) Methods of environmental test for analytical instruments |
|||
GB/T 4545-2007 玻璃瓶罐内应力试验方法(中英文版) Test methods for stress examination of glass containers |
|||
GB/T 1408.3-2007 绝缘材料电气强度试验方法 第3部分:1.2/50μs脉冲试验补充要求(中英文版) Electric strength of insulating materials test methods - Part 3: Additional requirements for 1,2/50μs impulse tests |
|||
GB/T 15833-2007 林业轮式和履带拖拉机 试验方法(中英文版) Test methods for forestry wheeled tractors and crawler tractors |
|||
GB/T 328.7-2007 建筑防水卷材试验方法 第7部分:高分子防水卷材 长度、宽度、平直度和平整度(中英文版) Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness |
|||
GB/T 328.6-2007 建筑防水卷材试验方法 第6部分:沥青防水卷材 长度、宽度和平直度(中英文版) Test methods for building sheets for waterproofing - Part 6: Bitumen sheets for waterproofing-length,width and straightness |
|||
GB/T 2522-2007 电工钢片(带)表面绝缘电阻、涂层附着性测试方法(中英文版) Methods of test for determination of surface insulation resistance and lamination factor of electric sheet and strip |
|||
GB/T 1408.2-2006 绝缘材料电气强度试验方法 第2部分:对应用直流电压试验的附加要求(中英文版) Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
|||
GB/T 14282.3-2006 仪表着陆系统(ILS)第3部分: 航向信标性能要求和测试方法(中英文版) Instrument landing system (ILS) - Part 3: Performance requirements and test methods for ILS localizer |
|||
GB/T 14282.1-2006 仪表着陆系统(ILS) 第1部分:下滑信标性能要求和测试方法(中英文版) Instrument landing system (ILS) - Part 1: Performance requirements and test methods of glide path beacon |
|||
GB/T 12684-2006 工业硼化物 分析方法(中英文版) Methods of test for boron compound for industrial use |
|||
GB/T 3318-2006 电力机车制成后投入使用前的试验方法(中英文版) Test methods for electric locomotives on completion of construction and before entry into service |
|||
GB/T 3315-2006 内燃机车制成后投入使用前的试验方法(中英文版) Test methods for diesel locomotives on completion of construction and before entry into service |
|||
GB/T 20346.2-2006 施肥机械 试验方法 第2部分: 行间施肥机(中英文版) Equipment for distributing fertilizers - Test methods - Part 2: Fertilizer distributors in lines |
|||
GB/T 20346.1-2006 施肥机械 试验方法 第1部分: 全幅宽施肥机(中英文版) Equipment for distributing fertilizers - Test methods - Part 1: Full width fertilizer distributors |
|||
GB/T 20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
|||
GB/T 20405.3-2006 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版) Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation |
|||
GB/T?20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
|||
GB/T 3903.9-2005 鞋类-内底试验方法-跟部持钉力(中英文版) Footwear-Test methods for insoles-Heel pin holding strengh |
|||
GB/T 3903.12-2005 鞋类-外底试验方法-撕裂强度(中英文版) Footwear-Test methods for outsoles-Tear strengh |
|||
GB/T 3903.14-2005 鞋类-外底试验方法-针撕破强度(中英文版) Footwear-Test methods for outsoles-Needle tear strength |
|||
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|||
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|||
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|||
GB/T 5270-2005 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述(中英文版) Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion |
|||
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|||
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
|||
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|||
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|||
GB/T 2423.52-2003 电工电子产品环境试验 第2部分:试验方法 试验77:结构强度与撞击(中英文版) Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock |
|||
GB/Z 19397-2003 工业机器人 电磁兼容性试验方法和性能评估准则 指南(中英文版) Industrial robots--EMC test methods and performance evaluation criteria--Guidelines |
|||
GB/T 19364-2003 轮式专用林业机械 制动系统的词汇、性能试验方法和技术条件(中英文版) Machinery forforestry--Wheeled special machines--Vocabulary,performance test methods and criteria for brake systems |
|||
GB/T 14634.4-2002 灯用稀土三基色荧光粉试验方法 电传感法粒度分布测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle size distribution by electric sensing zone technique |
|||
GB/T 6461-2002 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级(中英文版) Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests |
|||
GB/T 16656.34-2002 工业自动化系统与集成 产品数据的表达与交换 第34部分:一致性测试方法论与框架:应用协议实现的抽象测试方法(中英文版) Industrial automation systems and integration--Product data representation and exchange--Part 34:Conformance testing methodology and framework:Abstract test methods for application protocol implementations |
|||
GB/T 9966.1-2001 天然饰面石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验方法(中英文版) Test methods for natural facing stones--Part 1:Dry,wet and after freezing testmethods for compressive strength |
|||
GB/T 9966.7-2001 天然饰面石材试验方法 第7部分:检测板材挂件组合单元挂装强度试验方法(中英文版) Test methods for natural facing stones--Part 7:Test method for strength of individual stone anchorages |
|||
GB/T 9966.2-2001 天然饰面石材试验方法 第2部分:干燥、水饱和弯曲强度试验方法(中英文版) Test methods for natural facing stones--Part 2:Dry and wet test methods for flexural strength |
|||
GB/T 9359-2001 水文仪器基本环境试验条件及方法(中英文版) Basic conditions and methods of environmental test for hydrologic instruments |
|||
GB/T 11028-1999 测定浸渍剂对漆包线基材粘结强度的试验方法(中英文版) Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
|||
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法(中英文版) Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
|||
GB/T 5095.4-1997 电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests |
|||
GB/T 5095.2-1997 电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination,electrical continuity and contact resistance tests,insulationtests and voltage stress tests |
|||
GB/T 16168-1996 海洋结构物大气段用涂料加速试验方法(中英文版) Accelerated test methods for atmospheric surface coating systems for offshore structures |
|||
GB/T 15868-1995 全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果(中英文版) Shipborne radio equipment forming part of the (globalmaritime distress and safety system) and marine navigational equipment--General require-ments,methods of testing and required test results |
|||
GB 15670-1995 农药登记毒理学试验方法(中英文版) Toxicological test methods of pesticides for registration |
|||
GB/T 15479-1995 工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法(中英文版) Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments |
|||
GB/T 15309-1994 船舶货舱温湿度仪技术要求及试验方法(中英文版) Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel |
|||
GB/T 13823.6-1992 振动与冲击传感器的校准方法 基座应变灵敏度测试(中英文版) Methods for the calibration of vibration and shock pick-ups--Testing of base strain sensitivity |
|||
GB/T 13224-1991 工业导爆索试验方法(中英文版) Test methods for industrial detonating cord |
|||
GB/T 11309-1989 压电陶瓷材料性能测试方法 纵向压电应变常数d33的准静态测试(中英文版) Test methods for the properties of piezoelectric ceramics--Quasi-static testfor piezoelectric strain content d33 |
|||
GB/T 7962.7-1987 无色光学玻璃测试方法 条纹度检测方法(中英文版) Colourless optical glass test methods--Examination method for extent of stria |
|||
GB/T 5594.1-1985 电子元器件结构陶瓷材料性能测试方法 气密性测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness |
|||
GB/T 5594.5-1985 电子元器件结构陶瓷材料性能测试方法 体积电阻率测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method forvolume resistivity |
|||
GB/T 5594.2-1985 电子元器件结构陶瓷材料性能测试方法 杨氏弹性模量、泊松比测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method for Youngs elastic modulus and Poisson ratio |
找到:295條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |