中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 13277.3-2015 压缩空气 第3部分:湿度测量方法(中英文版) Compressed air—Part 3: Test methods for measurement of humidity |
![]() |
|
![]() |
GB/T 13277.2-2015 压缩空气 第2部分:悬浮油含量测量方法(中英文版) Compressed air—Part 2: Test methods for oil aerosol content |
![]() |
|
![]() |
GB/T 18978.307-2015 人-系统交互工效学 第307部分:电子视觉显示器的分析和符合性试验方法(中英文版) Ergonomics of human-system interaction—Part 307: Analysis and compliance test methods for electronic visual displays |
![]() |
|
![]() |
GB/T 8243.13-2015 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings |
![]() |
|
![]() |
GB/T 18148-2015 土方机械 压实机械压实性能试验方法(中英文版) Earth-moving machinery—Testing method of the compaction performance of rollers and compactors |
![]() |
|
![]() |
GB/T 31702-2015 纺织制品附件锐利性试验方法(中英文版) Testing method for sharpness of attached components on textile products |
![]() |
|
![]() |
GB/T 5594.8-2015 电子元器件结构陶瓷材料性能测试方法 第8部分:显微结构的测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 8: Test method for microstructure |
![]() |
|
![]() |
GB/T 5594.7-2015 电子元器件结构陶瓷材料性能测试方法 第7部分:透液性测定方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 7: Test method for liquid permeability |
![]() |
|
![]() |
GB/T 5594.6-2015 电子元器件结构陶瓷材料性能测试方法 第6部分:化学稳定性测试方法(中英文版) Test methods for properties of structure ceramics used in eletronic components and device—Part 6: Test method for chemical durability |
![]() |
|
![]() |
GB/T 5594.4-2015 电子元器件结构陶瓷材料性能测试方法 第4部分:介电常数和介质损耗角正切值的测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 4: Test method for permittivity and dielectric loss angle tangent value |
![]() |
|
![]() |
GB/T 5594.3-2015 电子元器件结构陶瓷材料性能测试方法 第3部分:平均线膨胀系数测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components and device—Part 3: Test method for mean coefficient of linear expansion |
![]() |
|
![]() |
GB/T 12967.4-2014 铝及铝合金阳极氧化膜检测方法 第4部分:着色阳极氧化膜耐紫外光性能的测定(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings |
![]() |
|
![]() |
GB/T 31226-2014 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法(中英文版) Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components |
![]() |
|
![]() |
GB/T 31213.2-2014 无损检测 铸铁构件检测 第2部分:声超声检测方法(中英文版) Non-destructive testing―Testing of cast iron equipments and components―Part 2: Test method for acousto-ultrasonic |
![]() |
|
![]() |
GB/T 31213.1-2014 无损检测 铸铁构件检测 第1部分:超声检测方法(中英文版) Non-destructive testing—Testing of cast iron equipments and components―Part 1: Test method for ultrasonic |
![]() |
|
![]() |
GB/T 31213.3-2014 无损检测 铸铁构件检测 第3部分:声发射检测方法(中英文版) Non-destructive testing—Testing of cast iron equipments and components—Part 3: Test method for acoustic emission |
![]() |
|
![]() |
GB/T 30969-2014 聚合物基复合材料短梁剪切强度试验方法(中英文版) Test method for short-beam shear strength of polymer matrix composite materials |
![]() |
|
![]() |
GB/T 30968.1-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第1部分:挤压性能试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates—Part 1: Test method of bearing response |
![]() |
|
![]() |
GB/T 30968.2-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分:充填孔拉伸和压缩试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression |
![]() |
|
![]() |
GB/T 30968.4-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分:开孔压缩强度试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength |
![]() |
|
![]() |
GB/T 30970-2014 聚合物基复合材料剪切性能V型缺口梁试验方法(中英文版) Test method for the shear properties of polymer matrix composite materials by V-notched beam method |
![]() |
|
![]() |
GB/T 3354-2014 定向纤维增强聚合物基复合材料拉伸性能试验方法(中英文版) Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials |
![]() |
|
![]() |
GB/T 3355-2014 聚合物基复合材料纵横剪切试验方法(中英文版) Test method for in-plane shear response of polymer matrix composite materials |
![]() |
|
![]() |
GB/T 3356-2014 定向纤维增强聚合物基复合材料弯曲性能试验方法(中英文版) Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials |
![]() |
|
![]() |
GB/T 30968.3-2014 聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分:开孔拉伸强度试验方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength |
![]() |
|
![]() |
GB/T 19519-2014 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则(中英文版) Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria |
![]() |
|
![]() |
GB/T 10870-2014 蒸气压缩循环冷水(热泵)机组性能试验方法(中英文版) The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle |
![]() |
|
![]() |
GB/T 30710-2014 层压复合垫片材料蠕变松弛率试验方法(中英文版) Standard test method for creep relaxation of laminated composite gasket materials |
![]() |
|
![]() |
GB/T 30709-2014 层压复合垫片材料压缩率和回弹率试验方法(中英文版) Standard test method for compressibility and recovery of laminated composite gasket materials |
![]() |
|
![]() |
GB/T 30475.2-2013 压缩空气过滤器 试验方法 第2部分:油蒸气(中英文版) Filters for compressed air― Test methods―Part 2: Oil vapours |
![]() |
|
![]() |
GB/T 30202.3-2013 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分:耐磨强度、耐压强度(中英文版) Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and compression strength |
![]() |
|
![]() |
GB/T 30475.1-2013 压缩空气过滤器 试验方法 第1部分:悬浮油(中英文版) Filters for compressed air―Test methods―Part 1: Oil aerosols |
![]() |
|
![]() |
GB/T 30032.2-2013 移动式升降工作平台 带有特殊部件的设计、计算、安全要求和试验方法 第2部分:装有非导电(绝缘)部件的移动式升降工作平台(中英文版) Mobile elevating work platforms - Design, calculations,safety requirements and test methods relative to special features - Part 2: MEWPs with non-conductive (insulating)components |
![]() |
|
![]() |
GB/T 29850-2013 光伏电池用硅材料补偿度测量方法(中英文版) Test method for measuring compensation degree of silicon materials used for photovoltaic applications |
![]() |
|
![]() |
GB 15086-2013 汽车门锁及车门保持件的性能要求和试验方法(中英文版) Motor vehicles’ door locks and retention components performance requirements and test methods |
![]() |
|
![]() |
GB/T 16903.2-2013 标志用图形符号表示规则 第2部分:理解度测试方法(中英文版) Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility |
![]() |
|
![]() |
GB/T 29067-2012 无损检测 工业计算机层析成像(CT)图像测量方法(中英文版) Non-destructive testing - Test method for measuring industrial computed tomography (CT) image |
![]() |
|
![]() |
GB/T 29240-2012 信息安全技术 终端计算机通用安全技术要求与测试评价方法(中英文版) Information security technology - General security technique requirements and testing and evaluation method for terminal computer |
![]() |
|
![]() |
GB/T 29418-2012 塑木复合材料产品物理力学性能测试(中英文版) Test methods for mechannical and physical properties of wood-plastic composite product |
![]() |
|
![]() |
GB/T 29069-2012 无损检测 工业计算机层析成像(CT)系统性能测试方法(中英文版) Non-destructive testing - Test method for measurement of industrial computed tomography (CT) system performance |
![]() |
|
![]() |
GB/T 29071-2012 无损检测 火工装置工业计算机层析成像(CT)检测方法(中英文版) Non-destructive testing - Test method for industrial computed tomography (CT) examination of initiating explosive device |
![]() |
|
![]() |
GB/T 1864-2012 颜料和体质颜料通用试验方法 颜料颜色的比较(中英文版) General methods of test for pigments and extenders - Comparison of colour of pigments |
![]() |
|
![]() |
GB/T 28889-2012 复合材料面内剪切性能试验方法(中英文版) Test method for In-plane shear properties of composite materials |
![]() |
|
![]() |
GB/T 2423.50-2012 环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验(中英文版) Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components |
![]() |
|
![]() |
GB/T 17626.24-2012 电磁兼容 试验和测量技术 HEMP传导骚扰保护装置的试验方法(中英文版) Electromagnetic compatibility - Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance |
![]() |
|
![]() |
GB/T 18029.21-2012 轮椅车 第21部分:电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法(中英文版) Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
![]() |
|
![]() |
GB/T 28289-2012 铝合金隔热型材复合性能试验方法(中英文版) Test methods for composite performances of aluminium alloy thermal barrier profiles |
![]() |
|
![]() |
GB/T 27797.3-2011 纤维增强塑料 试验板制备方法 第3部分:湿法模塑(中英文版) Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding |
![]() |
|
![]() |
GB/T 27797.8-2011 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
![]() |
|
![]() |
GB/T 27797.10-2011 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
![]() |
|
![]() |
GB/T 27797.11-2011 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
![]() |
|
![]() |
GB/T 28043-2011 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparisons |
![]() |
|
![]() |
GB/T 26642-2011 无损检测 金属材料计算机射线照相检测方法(中英文版) Non-destructive testing - Test method for computed radiography of metallic materials |
![]() |
|
![]() |
GB/T 26593-2011 无损检测仪器 工业用X射线CT装置性能测试方法(中英文版) Non-destructive testing instruments - Properties test method for performance of industrial X-ray computed tomography(CT)equipment |
![]() |
|
![]() |
GB/T 5923-2010 汽车柴油机燃油滤清器试验方法(中英文版) Test methods of fuel filter for automotive compression ignition engines |
![]() |
|
![]() |
GB/T 25494-2010 吸气剂成分分析测试方法(中英文版) Test methods for composition analysis of getters |
![]() |
|
![]() |
GB/T 13929-2010 水环真空泵和水环压缩机 试验方法(中英文版) Methods of testing for water-ring vacuum pumps and compressors |
![]() |
|
![]() |
GB/T 25096-2010 交流电压高于1000V变电站用电站支柱复合绝缘子 定义、试验方法及接收准则(中英文版) Composite station post insulators for substations with AC voltages greater than 1000V - Definitions,test methods and acceptance riteria |
![]() |
|
![]() |
GB/T 9766.7-2009 轮胎气门嘴试验方法 第7部分:零部件试验方法(中英文版) Test method for tyre valves - Part 7: Components test methods |
![]() |
|
![]() |
GB/T 24684.1-2009 植物保护机械 评价清洗系统的试验方法 第1部分:喷雾机整机的内部清洗(中英文版) Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1:Internal cleaning of complete sprayers |
![]() |
|
![]() |
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
![]() |
|
![]() |
GB/T 3249-2009 金属及其化合物粉末费氏粒度的测定方法(中英文版) Test method for fisher number of metal powders and related compounds |
![]() |
|
![]() |
GB/T 9327-2008 额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求(中英文版) Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements |
![]() |
|
![]() |
GB/T 3903.28-2008 鞋类 外底试验方法 压缩能(中英文版) Footwear - Test methods for outsoles - Compression energy |
![]() |
|
![]() |
GB/T 14901-2008 玻璃密度测定 沉浮比较法(中英文版) Test method for density of glass - Method of the sink-float comparison |
![]() |
|
![]() |
GB/T 540-2008 耐油石棉橡胶板试验方法(中英文版) Test methods for oil-resisting compressed asbestos fibre jointing |
![]() |
|
![]() |
GB/T 22307-2008 密封垫片高温抗压强度试验方法(中英文版) Standard test method for compressive strength of gaskets at elevated temperatures |
![]() |
|
![]() |
GB/T 8167-2008 包装用缓冲材料动态压缩试验方法(中英文版) Testing method of dynamic compression for packaging cushioning materials |
![]() |
|
![]() |
GB/T 13501-2008 封闭式制冷压缩机用电动机绝缘相容性试验方法(中英文版) Test methods for insulation compatibility of electric motors for hermetic refrigeration compressors |
![]() |
|
![]() |
GB/T 22052-2008 用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法(中英文版) Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope |
![]() |
|
![]() |
GB/T 2951.51-2008 电缆和光缆绝缘和护套材料通用试验方法 第51部分:填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component |
![]() |
|
![]() |
GB/T 2951.42-2008 电缆和光缆绝缘和护套材料通用试验方法 第42部分:聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi |
![]() |
|
![]() |
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
![]() |
|
![]() |
GB/T 2951.31-2008 电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking |
![]() |
|
![]() |
GB/T 2951.21-2008 电缆和光缆绝缘和护套材料通用试验方法 第21部分:弹性体混合料专用试验方法 耐臭氧试验-热延伸试验-浸矿物油试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
![]() |
|
![]() |
GB/T 8168-2008 包装用缓冲材料静态压缩试验方法(中英文版) Testing method of static compression for packaging cushioning materials |
![]() |
|
![]() |
GB/T 14832-2008 标准弹性体材料与液压液体的相容性试验(中英文版) Test methods for compatibility between hydraulic fluids and standard elastomeric materials |
![]() |
|
![]() |
GB/T 21779-2008 金属粉末和相关化合物粒度分布的光散射试验方法(中英文版) Test method for particle size distribution of metal powders and related compounds by light scattering |
![]() |
|
![]() |
GB/T 12622-2008 管法兰用垫片压缩率及回弹率试验方法(中英文版) Standard test method for compressibility and recovery of gaskets for pipe flanges |
![]() |
|
![]() |
GB/T 21613-2008 危险品 自加速分解温度试验方法(中英文版) Dangerous goods - Test method for determination of the accelerating decomposition temperature |
![]() |
|
![]() |
GB/T 15072.9-2008 贵金属合金化学分析方法 金合金中铟量的测定 EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of indium content for gold alloys - Complexometric return titration using EDTA |
![]() |
|
![]() |
GB/T 15072.8-2008 贵金属合金化学分析方法 金、钯、银合金中铜量的测定 硫脲析出EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of copper content for gold, palladium and silver alloys - Complexometric return titration using thiourea releasing EDTA |
![]() |
|
![]() |
GB/T 15072.10-2008 贵金属合金化学分析方法 金合金中镍量的测定 EDTA络合返滴定法(中英文版) Test method of precious metal alloys - Determination of nickel content for gold alloys - Complexometric backing titration using EDTA |
![]() |
|
![]() |
GB/T 21398-2008 农林机械 电磁兼容性 试验方法和验收规则(中英文版) Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
![]() |
|
![]() |
GB/T 21429-2008 户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐(中英文版) Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations |
![]() |
|
![]() |
GB/T 8627-2007 建筑材料燃烧或分解的烟密度试验方法(中英文版) Test method for density of smoke from the burning or decomposition of building materials |
![]() |
|
![]() |
GB/T 15022.2-2007 电气绝缘用树脂基活性复合物 第2部分: 试验方法(中英文版) Resin besed reactive compounds used for electrical insulation - Part 2: Methods of test |
![]() |
|
![]() |
GB/T 21239-2007 纤维增强塑料层合板冲击后压缩性能试验方法(中英文版) Test method for compression after impact properties of fiber reinforced plastic laminates |
![]() |
|
![]() |
GB/T 328.26-2007 建筑防水卷材试验方法 第26部分:沥青防水卷材 可溶物含量(浸涂材料含量)(中英文版) Test methods for building sheets for waterproofing - Part 26: Bitumen sheets for waterproofing-dissoulble composite of membrane (impregnated and coated asphalt amount) |
![]() |
|
![]() |
GB/T 20671.9-2006 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法(中英文版) Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials |
![]() |
|
![]() |
GB/T 20671.2-2006 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法(中英文版) Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials |
![]() |
|
![]() |
GB/T 3251-2006 铝及铝合金管材压缩试验方法(中英文版) Compression test method for aluminium and aluminium alloys tubes |
![]() |
|
![]() |
GB/T 12684-2006 工业硼化物 分析方法(中英文版) Methods of test for boron compound for industrial use |
![]() |
|
![]() |
GB/T 3315-2006 内燃机车制成后投入使用前的试验方法(中英文版) Test methods for diesel locomotives on completion of construction and before entry into service |
![]() |
|
![]() |
GB/T 3318-2006 电力机车制成后投入使用前的试验方法(中英文版) Test methods for electric locomotives on completion of construction and before entry into service |
![]() |
|
![]() |
GB/T 20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
![]() |
|
![]() |
GB/T 20142-2006 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则(中英文版) Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria |
![]() |
|
![]() |
GB/T 8489-2006 精细陶瓷压缩强度试验方法(中英文版) Test method for compressive strength of fine ceramics (advanced ceramics, advanced technical ceramics) |
![]() |
|
![]() |
GB/T?20170.1-2006 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版) Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds |
![]() |
|
![]() |
GB/T 5170.18-2005 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments |
![]() |
|
![]() |
GB/T 3856-2005 单向纤维增强塑料平板压缩性能试验方法(中英文版) Test method for compression properties of unidirectional fiber reinforced plastics |
![]() |
|
![]() |
GB/T 1453-2005 夹层结构或芯子平压性能试验方法(中英文版) Test method for flatwise compression properties of sandwich constructions or cores |
![]() |
|
![]() |
GB/T 1454-2005 夹层结构侧压性能试验方法(中英文版) Test method for edgewise compressive properties of sandwich constructions |
![]() |
|
![]() |
GB/T 5773-2004 容积式制冷剂压缩机性能试验方法(中英文版) The method of performance test for positive displacement refrigerant compressors |
![]() |
|
![]() |
GB/T 6554-2003 电气绝缘用树脂基反应复合物 第2部分:试验方法 电气用涂敷粉末方法(中英文版) Resin based reactive compounds used for electrical insulation--Part 2:Methods of test--Methods for coating pourders for electrical purposes |
![]() |
|
![]() |
GB/T 13477.4-2002 建筑密封材料试验方法 第4部分:原包装单组分密封材料挤出性的测定(中英文版) Test method for building sealants--Part 4:Determination of extrudability of one-component sealants |
![]() |
|
![]() |
GB/T 13477.16-2002 建筑密封材料试验方法 第16部分:压缩特性的测定(中英文版) Test method for buildingsealants--Part 16:Determination of resistance to compression |
![]() |
|
![]() |
GB/T 6881.2-2002 声学 声压法测定噪声源声功率级 混响场中小型可移动声源工程法 第1部分:硬壁测试室比较法(中英文版) Acoustics--Determination of sound power levels of noise sources--Engineering methods for small,movable sources in reverberant field--Part 1:Comparison method for hard-walled test rooms |
![]() |
|
![]() |
GB/T 9966.1-2001 天然饰面石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验方法(中英文版) Test methods for natural facing stones--Part 1:Dry,wet and after freezing testmethods for compressive strength |
![]() |
|
![]() |
GB/T 18148-2000 压实机械压实性能试验方法(中英文版) Testing method of the compaction performance of rollers and compactors |
![]() |
|
![]() |
GB/T 4740-1999 陶瓷材料抗压强度试验方法(中英文版) Standard test method for compressive resistance ceramic materials |
![]() |
|
![]() |
GB/T 5597-1999 固体电介质微波复介电常数的测试方法(中英文版) Test method for complex permittivity of solid dielectric materials at microwave frequencies |
![]() |
|
![]() |
GB/T 5095.11-1997 电子设备用机电元件 基本试验规程及测量方法 第11部分:气候试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 11:Climatic tests |
![]() |
|
![]() |
GB/T 5095.1-1997 电子设备用机电元件 基本试验规程及测量方法 第1部分:总则(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuringmethods--Part 1:General |
![]() |
|
![]() |
GB/T 5095.12-1997 电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering |
![]() |
|
![]() |
GB/T 5095.3-1997 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests |
![]() |
|
![]() |
GB/T 5095.2-1997 电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination,electrical continuity and contact resistance tests,insulationtests and voltage stress tests |
![]() |
|
![]() |
GB/T 5095.5-1997 电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components),static load tests(fixed components),endurance tests and overload tests |
![]() |
|
![]() |
GB/T 5095.6-1997 电子设备用机电元件 基本试验规程及测量方法 第6部分:气候试验和锡焊试验(中英文版) Electromechanical components for electronic equipment--Basic testing proceduresand measuring methods--Part 6:Climatic tests and soldering tests |
![]() |
|
![]() |
GB/T 5095.7-1997 电子设备用机电元件 基本试验规程及测量方法 第7部分:机械操作试验和密封性试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 7:Mechanical operating tests and sealing tests |
![]() |
|
![]() |
GB/T 5095.8-1997 电子设备用机电元件 基本试验规程及测量方法 第8部分:连接器、接触件及引出端的机械试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8:Connector tests(mechanical)and mechanical tests on contacts and terminations |
![]() |
|
![]() |
GB/T 5095.9-1997 电子设备用机电元件 基本试验规程及测量方法 第9部分:杂项试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9:Miscellaneous tests |
![]() |
|
![]() |
GB/T 5095.15-1997 电子设备用机电元件 基本试验规程及测量方法 第15部分:接触件和引出端的机械试验 第八篇:试验15h接触件固定机构耐工具使用性(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application |
![]() |
|
![]() |
GB/T 5095.4-1997 电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests |
![]() |
|
![]() |
GB/T 16665-1996 空气压缩机组及供气系统节能监测方法(中英文版) Monitoring and testing method for energy saving of air compressor unit and air distribution system |
![]() |
|
![]() |
GB/T 13823.16-1995 振动与冲击传感器的校准方法 温度响应比较测试法(中英文版) Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison |
![]() |
|
![]() |
GB/T 15288-1994 抑制射频干扰整件滤波器 第二部分:分规范 试验方法的选择和一般要求(中英文版) Complete filter units for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements |
![]() |
|
![]() |
GB/T 12636-1990 微波介质基片复介电常数带状线测试方法(中英文版) Stripline test method for complexpermittivity of microwave dielectric substrates |
![]() |
|
![]() |
GB/T 11177-1989 无机胶粘剂套接压缩剪切强度试验方法(中英文版) Testing method for compressive shear strength of dowel joint by inorganic adhesives |
![]() |
|
![]() |
GB/T 9534-1988 毫米波频段固体电介质材料介电特性测试方法 准光腔法(中英文版) Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using “Quasi-optic Cavity” technique |
![]() |
|
![]() |
GB/T 7265.2-1987 固体电介质微波复介电常数的测试方法 开式腔法(中英文版) Test method for the complex permittivity of solid dielectric materials at microwave frequencies--Open cavity method |
![]() |
|
![]() |
GB/T 7265.1-1987 固体电介质微波复介电常数的测试方法 微扰法(中英文版) Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method |
![]() |
|
![]() |
GB/T 5594.5-1985 电子元器件结构陶瓷材料性能测试方法 体积电阻率测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method forvolume resistivity |
![]() |
|
![]() |
GB/T 5594.2-1985 电子元器件结构陶瓷材料性能测试方法 杨氏弹性模量、泊松比测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method for Youngs elastic modulus and Poisson ratio |
![]() |
|
![]() |
GB/T 5594.1-1985 电子元器件结构陶瓷材料性能测试方法 气密性测试方法(中英文版) Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness |
![]() |
|
![]() |
GB/T 5441.6-1985 通信电缆试验方法 串音衰减试验 比较法(中英文版) Test methods for communication cable--Crosstalk attenuation test--Comparison method |
![]() |
找到:286條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |