中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 34320-2017 六氟化硫电气设备用分子筛吸附剂使用规范(中英文版) Specification for the use of molecular sieves in SF6 electrical apparatus |
|||
GB/T 34030-2017 船舶和海上技术 船用热固树脂玻璃纤维管及附件技术要求(中英文版) Ships and marine technology—Standard specification for thermosetting resin fiberglass pipe and fittings to be used for marine applications |
|||
GB/T 34053.1-2017 纸质印刷产品印制质量检验规范 第1部分:术语(中英文版) Specifications of quality inspection for printed paper products—Part 1: Terms |
|||
GB/T 6113.201-2017 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1 部分:无线电骚扰和抗扰度测量方法 传导骚扰测量(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-1: Methods of measurement of disturbances and immunity—Conducted disturbance measurements |
|||
GB/T 9813.4-2017 计算机通用规范 第4部分:工业应用微型计算机(中英文版) General specification for computers—Part 4: Industrial application microcomputer |
|||
GB/T 33803-2017 钢筋混凝土阻锈剂耐蚀应用技术规范(中英文版) Technical specification for application of reinforced concrete anti-corrosion inhibitor |
|||
GB/T 33560-2017 信息安全技术 密码应用标识规范(中英文版) Information security technology—Cryptographic application identifier criterion specification |
|||
GB/T 33700-2017 地基导航卫星遥感水汽观测规范(中英文版) Specification for the ground-based GNSS water vapor remote sensing observation |
|||
GB/T 33556.1-2017 医院洁净室及相关受控环境应用规范 第1部分:总则(中英文版) Application specification for hospital cleanrooms and associated controlled environment—Part 1: General guidelines |
|||
GB/T 33753-2017 回转式全自动粘流体灌装封盖机通用技术要求(中英文版) General specification for rotary automatic filling-capping machine for high viscosity fluid |
|||
GB/T 34053.3-2017 纸质印刷产品印制质量检验规范 第3部分:图书期刊(中英文版) Specifications of quality inspection for printed paper products—Part 3: Books and periodicals |
|||
GB/T 35634-2017 公共服务电子地图瓦片数据规范(中英文版) Tile data specification of electronic map for public service |
|||
GB/T 35765-2017 陆地国界测绘规范(中英文版) Specifications for national land boundary surveying and mapping |
|||
GB/T 17850.4-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag |
|||
GB/T 35230-2017 地面气象观测规范 蒸发(中英文版) Specifications for surface meteorological observation—Evaporation |
|||
GB/T 34053.2-2017 纸质印刷产品印制质量检验规范 第2部分:抽样判定规则(中英文版) Specifications of quality inspection for printed paper products—Part 2: Sampling and judging rules |
|||
GB/T 35291-2017 信息安全技术 智能密码钥匙应用接口规范(中英文版) Information security technology—Cryptography token application interface specification |
|||
GB/T 17850.1-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分:导则和分类(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification |
|||
GB/T 18838.2-2017 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁砂(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit |
|||
GB/T 34053.6-2017 纸质印刷产品印制质量检验规范 第6部分:折叠纸盒(中英文版) Specifications of quality inspection for printed paper products—Part 6: Folding carton |
|||
GB/T 17850.7-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide |
|||
GB/T 17850.5-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag |
|||
GB/T 35782-2017 道路甩挂运输车辆技术条件(中英文版) Specification for swap trailer transport of road vehicles |
|||
GB 35650-2017 国家基本比例尺地图测绘基本技术规定(中英文版) Basic specifications for surveying and mapping of national fundamental scale maps |
|||
GB/T 35636-2017 城市地下空间测绘规范(中英文版) Specification for surveying and mapping of urban underground space |
|||
GB/T 30269.602-2017 信息技术 传感器网络 第602部分:信息安全:低速率无线传感器网络网络层和应用支持子层安全规范(中英文版) Information technology—Sensor network—Part 602: Information security : Network layer and application support sublayer security specification for low-rate wireless sensor networks |
|||
GB/T 14912-2017 1:500 1:1 000 1:2 000外业数字测图规程(中英文版) Specifications for 1:500 1:1 000 1:2 000 field digital mapping |
|||
GB/T 35276-2017 信息安全技术 SM2密码算法使用规范(中英文版) Information security technology—SM2 cryptographic algorithm usage specification |
|||
GB/T 35630-2017 手机地图数据规范(中英文版) Data specification for mobile phone map |
|||
GB/T 35766-2017 地图导航定位产品通用规范(中英文版) General specification for GNSS navigation product based map |
|||
GB/T 35631-2017 地图符号XML描述规范(中英文版) Specification for XML description of map symbol |
|||
GB/T 35587-2017 制造过程物联集成平台应用实施规范(中英文版) Application and implementation specification of integrated platform for internet of things in manufacturing processes |
|||
GB/T 2668-2017 单服、套装规格(中英文版) Specifications for single,layer apparels and clothing sets |
|||
GB/T 34053.5-2017 纸质印刷产品印制质量检验规范 第5部分:报纸(中英文版) Specifications of quality inspection for printed paper products—Part 5: Newspaper |
|||
GB/T 34053.4-2017 纸质印刷产品印制质量检验规范 第4部分:中小学教科书(中英文版) Specifications of quality inspection for printed paper products—Part 4: Primary and secondary school textbooks |
|||
GB/T 35275-2017 信息安全技术 SM2密码算法加密签名消息语法规范(中英文版) Information security technology—SM2 cryptographic algorithm encrypted signature message syntax specification |
|||
GB/T 33453-2016 基础地理信息数据库建设规范(中英文版) Specifications for database construction of fundamental geographic information |
|||
GB/T 33462-2016 基础地理信息 1:10 000地形要素数据规范(中英文版) Fundamental geographic information specifications for 1:10 000 topographic data |
|||
GB/T 33461-2016 家电延保服务规范(中英文版) Specification of extended warranty service for household electrical appliances |
|||
GB/T 33467-2016 全自动吹瓶灌装旋盖一体机通用技术要求(中英文版) General specification for automatic blowing-filling-capping bloc |
|||
GB/T 33472-2016 含气饮料灌装封盖机通用技术要求(中英文版) General specification for carbonated beverages filling-capping machine |
|||
GB/T 33481-2016 党政机关电子印章应用规范(中英文版) Application specification for electronic seal of Party and government organs |
|||
GB/T 33478-2016 党政机关电子公文应用接口规范(中英文版) Application programming interface specification for electronic official document of Party and government organs |
|||
GB/T 33290.13-2016 文物出境审核规范 第13部分:兵器(中英文版) Specification for inspecting exit cultural relics—Part 13: Weapon |
|||
GB/T 33290.16-2016 文物出境审核规范 第16部分:笔墨纸砚(中英文版) Specification for inspecting exit cultural relics—Part 16: Writing brush, ink stick, paper and inkstone |
|||
GB/T 33152-2016 影像材料 湿法加工银胶型黑白照相反射胶片 暗室储存规范(中英文版) Imaging materials—Wet-processed silver-gelatin type black-and-white photographic reflection prints—Specifications for dark storage |
|||
GB/T 33183-2016 基础地理信息 1:50 000地形要素数据规范(中英文版) Fundamental geographic information—Specifications for 1:50 000 topographic data |
|||
GB/T 33073-2016 含镍废料处理处置技术规范(中英文版) Technical specification for nickel scrap treatment and disposal |
|||
GB/T 33071-2016 含钴废料处理处置技术规范(中英文版) Technical specification for cobalt scrap treatment and disposal |
|||
GB/T 33135-2016 信息技术 指静脉识别系统 指静脉采集设备通用规范(中英文版) Information technology—Finger vein recognition system—General specifications for finger vein capture device |
|||
GB/T 9813.2-2016 计算机通用规范 第2部分:便携式微型计算机(中英文版) General specification for computer—Part 2:Laptop microcomputer |
|||
GB/T 32738-2016 土壤制图 1:50 000和1:100 000土壤图数字化规范(中英文版) Soil mapping—Specifications for digitizing soil maps at the scale of 1:50,000 and 1:100,000 |
|||
GB/T 32830.2-2016 装备制造业 制造过程射频识别 第2部分:读写器技术要求及应用规范(中英文版) Equipment manufacturing industry—Radio frequency identification for manufacturing process—Part 2 : Technical requirement and application specifications for RFID reader |
|||
GB/T 32830.3-2016 装备制造业 制造过程射频识别 第3部分:系统应用接口规范(中英文版) Equipment manufacturing industry—Radio frequency identification for manufacturing process—Part 3 : System application interface specification |
|||
GB/T 32830.1-2016 装备制造业 制造过程射频识别 第1部分:电子标签技术要求及应用规范(中英文版) Equipment manufacturing industry—Radio frequency identification for manufacturing process—Part 1 : Technical requirement and application specifications for RFID tag |
|||
GB/T 6113.203-2016 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3 部分:无线电骚扰和抗扰度测量方法 辐射骚扰测量(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of measurement of disturbances and immunity—Radiated disturbance measurements |
|||
GB/T 6113.104-2016 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分: 无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements |
|||
GB/T 6113.101-2016 无线电骚扰和抗扰度测量设备和测量方法规范 第1-1部分:无线电骚扰和抗扰度测量设备 测量设备(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus |
|||
GB/T 33447-2016 地理信息系统软件测试规范(中英文版) Specification of geographic information system software testing |
|||
GB/T 33448-2016 数字城市地理信息公共平台运行服务质量规范(中英文版) Running service quality specifications for common platform of geographic information of digital city |
|||
GB/T 32985-2016 快速公共汽车交通系统建设与运营管理规范(中英文版) Specification for construction and operation management of bus rapid transit system |
|||
GB/T 21562.2-2015 轨道交通 可靠性、可用性、可维护性和安全性规范及示例 第2部分:安全性的应用指南(中英文版) Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS)—Part 2: Guide to the application for safety |
|||
GB/T 11313.29-2015 射频连接器 第29部分:50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器(1.0/2.3型)分规范(中英文版) Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in (rack and panel applications)mechanism with characteristic impedance 50Ω |
|||
GB/T 21562.3-2015 轨道交通 可靠性、可用性、可维修性和安全性规范及示例 第3部分:机车车辆RAM的应用指南(中英文版) Railway applications—Specification and demonstration of reliability, availability, maintainability and safety (RAMS)—Part 3:Guide to the application for rolling stock RAM |
|||
GB 32275-2015 纺织工业防火防爆管道安全装置技术规范(中英文版) Technical specifications of pipeline safety apparatus for fire dampers and explosion protection in textile industry |
|||
GB/T 32169.4-2015 政务服务中心运行规范 第4部分:窗口服务评价要求(中英文版) Specification for operation of administrative service centre—Part 4: Requirements for counter service appraisal |
|||
GB/T 10067.21-2015 电热装置基本技术条件 第21部分:大型交流电弧炉(中英文版) Basic specifications for electroheat installations—Part 21: Large capacity electric arc furnace using alternating current |
|||
GB/T 18838.5-2015 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分:钢丝切丸(中英文版) Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot |
|||
GB/T 6346.3-2015 电子设备用固定电容器 第3部分:分规范 表面安装MnO2固体电解质钽固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 3: Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte |
|||
GB/T 6346.1101-2015 电子设备用固定电容器 第11-1部分:空白详细规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 评定水平EZ(中英文版) Fixed capacitors for use in electronic equipment—Part 11-1: Blank detail specification—Fixed polyethylene-terephthalate film dielectric metal foil d.c.capacitors—Assessment level EZ |
|||
GB/T 6346.11-2015 电子设备用固定电容器 第11部分:分规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 11: Sectional specification—―Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
|||
GB/T 6346.1401-2015 电子设备用固定电容器 第14-1部分:空白详细规范 抑制电源电磁干扰用固定电容器 评定水平D(中英文版) Fixed capacitors for use in electronic equipment—Part 14-1: Blank detail specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains—Assessment level D |
|||
GB/T 6346.14-2015 电子设备用固定电容器 第14部分:分规范 抑制电源电磁干扰用固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 14: Sectional specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
|||
GB/T 6346.301-2015 电子设备用固定电容器 第3-1部分:空白详细规范 表面安装MnO2固体电解质钽固定电容器 评定水平EZ(中英文版) Fixed capacitors for use in electronic equipment—Part 3-1: Blank detail specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte—Assessment level EZ |
|||
GB/T 31769-2015 创新方法应用能力等级规范(中英文版) Rating specification for applied competence of innovation method |
|||
GB/T 31455.6-2015 快速公交(BRT)智能系统 第6部分:调度中心与场站站台控制系统通信数据接口规范(中英文版) Intelligent system of bus rapid transit—Part 6: Interface specifications between dispatch center and depot/platform control system |
|||
GB/T 31501-2015 信息安全技术 鉴别与授权 授权应用程序判定接口规范(中英文版) Information security technology—Authentication and authorization—Specification for authorization application programming decision interface |
|||
GB/T 31467.1-2015 电动汽车用锂离子动力蓄电池包和系统 第1部分:高功率应用测试规程(中英文版) Lithium-ion traction battery pack and system for Electric vehicles—Part 1: Test specification for High power applications |
|||
GB/T 31455.5-2015 快速公交(BRT)智能系统 第5部分:调度中心与车载信息终端通信数据接口规范(中英文版) Intelligent system of bus rapid transit—Part 5: Interface specifications between dispatch center and on-board information terminal |
|||
GB/T 31467.2-2015 电动汽车用锂离子动力蓄电池包和系统 第2部分:高能量应用测试规程(中英文版) Lithium-ion traction battery pack and system for Electric vehicles—Part 2: Test specification for High energy applications |
|||
GB/T 30269.301-2014 信息技术 传感器网络 第301部分:通信与信息交换:低速无线传感器网络网络层和应用支持子层规范(中英文版) Information technology—Sensor networks—Part 301:Communication and information exchange: Network layer and application support sublayer technical specifications for low-rate wireless sensor networks |
|||
GB/T 31037.2-2014 工业起升车辆用燃料电池发电系统 第2部分:技术条件(中英文版) Fuel cell power system used for industrial lift truck applications―Part 2: Technical specification |
|||
GB/T 31104-2014 造纸机械用钢制烘缸(筒)技术条件(中英文版) Specification for steel paper machine dryer |
|||
GB/T 30788-2014 钢制管道外部缠绕防腐蚀冷缠矿脂带作业规范(中英文版) Specification of cold-applied petrolatum tape coatings for steel pipelines |
|||
GB/T 30724-2014 工业应用的太阳能热水系统技术规范(中英文版) Specifications of solar water heating systems for industrial applications |
|||
GB/T 30318-2013 地理信息公共平台基本规定(中英文版) Basic specifications for common platform of geographic information |
|||
GB/T 30319-2013 基础地理信息数据库基本规定(中英文版) Basic specifications for fundamental geographic information database |
|||
GB/T 30267.1-2013 信息技术 生物特征识别应用程序接口 第1部分:BioAPI规范(中英文版) Information technology—Biometric application programming interface—Part 1: BioAPI specification |
|||
GB/T 30274-2013 信息安全技术 公钥基础设施 电子签名卡应用接口测试规范(中英文版) Information security techniques—Public Key Infrastructure―Specification of testing on application interfaces of electronic signature card |
|||
GB/T 30289.1-2013 基于网络传输的导航电子地图数据更新规范 第1部分:应用于车载终端编译的增量更新模式(中英文版) Network-based data updating specification for navigation electronic map-Part 1: Incremental update mode for the on-board compiling |
|||
GB/T 30297-2013 氯碱工业用全氟离子交换膜 应用规范(中英文版) Perfluorinated ion-exchange membrane for chlor-alkali industry—Specification on application |
|||
GB/T 10189-2013 电子设备用固定电容器 第13-1部分:空白详细规范 金属箔式聚丙烯膜介质直流固定电容器 评定水平E和EZ(中英文版) Fixed capacitors for use in electronic equipment—Part 13-1:Blank detail specification—Fixed polypropylene film dielectric metal foil d.c.capacitors—Assessment level E and EZ |
|||
GB/T 14580-2013 电子设备用固定电容器 第17-1部分:空白详细规范 金属化聚丙烯膜介质交流和脉冲固定电容器评定水平E和EZ(中英文版) Fixed capacitors for use in electronic equipment—Part 17-1:Blank detail specification—Fixed metallized polypropylene film dielectric a.c. and pulse capacitors—Assessment level E and EZ |
|||
GB/T 15448-2013 电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors |
|||
GB/T 16467-2013 电子设备用固定电容器 第19-1部分:空白详细规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 评定水平EZ(中英文版) Fixed capacitors for use in electronic equipment―Part 19-1: Blank detail specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors―Assessment level EZ |
|||
GB/T 10944.4-2013 自动换刀7:24圆锥工具柄 第4部分:柄的技术条件(中英文版) Tool shanks with 7/24 taper for automatic tool changers—Part 4: Technical specifications for shanks |
|||
GB/T 10944.5-2013 自动换刀7:24圆锥工具柄 第5部分:拉钉的技术条件(中英文版) Tool shanks with 7/24 taper for automatic tool changers―Part 5: Technical specifications of Retention knobs |
|||
GB/T 10188-2013 电子设备用固定电容器 第13部分:分规范 金属箔式聚丙烯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 13:Sectional specification—Fixed polypropylene film dielectric metal foil d.c.capacitors |
|||
GB/T 14579-2013 电子设备用固定电容器 第17部分:分规范 金属化聚丙烯膜介质交流和脉冲固定电容器(中英文版) Fixed capacitors for use in electronic equipment—Part 17:Sectional specification—Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
|||
GB/T 16901.2-2013 技术文件用图形符号表示规则 第2部分:图形符号(包括基准符号库中的图形符号)的计算机电子文件格式规范及其交换要求(中英文版) Rules for design of graphical symbols for use in the technical documentation―Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library,and requirements for their interchange |
|||
GB/T 30118-2013 声表面波(SAW)器件用单晶晶片规范与测量方法(中英文版) Single crystal wafers for surface acoustic wave (SAW) device applications―Specifications and measuring methods |
|||
GB/Z 6113.205-2013 无线电骚扰和抗扰度测量设备和测量方法规范 第2-5部分:大型设备骚扰发射现场测量(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods―Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment |
|||
GB/T 30145-2013 YZP系列起重及冶金用变频调速三相异步电动机技术条件(机座号450~500)(中英文版) Specification for YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications(Frame size 450 to 500) |
|||
GB/T 30143-2013 YZR系列起重及冶金用绕线转子三相异步电动机技术条件(机座号450~500)(中英文版) Specification for YZR series of wound-rotor three-phase induction motors for crane and metallurgical applications |
|||
GB/T 21972.3-2013 起重及冶金用变频调速三相异步电动机技术条件 第3部分:YZP系列起重及冶金用变频调速三相异步电动机(离心风机冷却)(中英文版) Specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications―Part 3:YZP series variable-frequency adjustable-speed three-phase induction motors (cooled with centrifugal fan)for crane and met |
|||
GB/T 29844-2013 用于先进集成电路光刻工艺综合评估的图形规范(中英文版) Specifications of metrology patterns for the evaluation of advanced photolithgraphy |
|||
GB/T 29829-2013 信息安全技术 可信计算密码支撑平台功能与接口规范(中英文版) Information security techniques - Functionality and interface specification of cryptographic support platform for trusted computing |
|||
GB/Z 29619.6-2013 测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第6部分:应用层协议规范(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification - Part 6: Application Layer Protocol specification |
|||
GB/Z 29619.5-2013 测量和控制数字数据通信 工业控制系统用现场总线 类型8:INTERBUS规范 第5部分:应用层服务的定义(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 5: Application Layer service definition |
|||
GB/T 29454-2012 制浆造纸企业能源计量器具配备和管理要求(中英文版) Specification for equipping and managing of the measuring instrument of energy in the pulp and paper enterprise |
|||
GB/T 29001.4-2012 机床数控系统 NCUC-Bus现场总线协议规范 第4部分:应用层(中英文版) Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 4:Application layer |
|||
GB/T 21972.2-2012 起重及冶金用变频调速三相异步电动机技术条件 第2部分:YZP系列起重及冶金用变频调速三相异步电动机(轴流风机冷却)(中英文版) Specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications - Part 2: YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications(cool |
|||
GB/T 14860.4-2012 电子和通信设备用变压器和电感器 第4部分:按能力批准程序评定质量的开关电源变压器分规范(中英文版) Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
|||
GB/T 14860.3-2012 电子和通信设备用变压器和电感器 第3部分:按能力批准程序评定质量的电源变压器分规范(中英文版) Transformers and inductors for use in electronic and telecommunication equipment - Part 3:Sectional specification for power transformers on the basis of the capability approval procedure |
|||
GB/T 12859.2-2012 电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分:分规范- 鉴定批准(中英文版) Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components (IECQ) - Part 2: Sectional specification-Qualification approval |
|||
GB/T 10190-2012 电子设备用固定电容器 第16部分: 分规范 金属化聚丙烯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electronic equipment - Part 16: Sectional specification:Fixed metallized polypropylene film dielectric d.c.capacitors |
|||
GB/T 12273.501-2012 石英晶体元件 电子元器件质量评定体系规范 第5.1部分:空白详细规范 鉴定批准(中英文版) Quartz crystal units A specification in the quality assessment system for electronic components Part 5.1: Blank detail specification- qualification approval |
|||
GB/T 12859.1-2012 电子元器件质量评定体系规范 压电陶瓷谐振器 第1部分:总规范- 鉴定批准(中英文版) Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components(IECQ) - Part 1: Generic specification-Qualification approval |
|||
GB/T 26831.3-2012 社区能源计量抄收系统规范 第3部分:专用应用层(中英文版) Society energy metering for reading system specification - Part 3: Dedicated application layer |
|||
GB/T 28852-2012 生物人工气候试验箱技术条件(中英文版) Specifications for climatic chambers for biological applications |
|||
GB/T 5969-2012 电子设备用固定电容器 第9-1部分:空白详细规范 2类瓷介固定电容器 评定水平 EZ(中英文版) Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification:Fixed capacitor of ceramic dielectric,Class 2 - Assessment level EZ |
|||
GB/T 7333-2012 电子设备用固定电容器 第2-1部分:空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E和EZ(中英文版) Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors - Assessment levels E and EZ |
|||
GB/T 17207-2012 电子设备用固定电容器 第18-1部分:空白详细规范 表面安装固体(MnO2)电解质铝固定电容器 评定水平EZ(中英文版) Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount - Capacitors with solid(MnO2) electrolyte - Assessment level EZ |
|||
GB/T 10185-2012 电子设备用固定电容器 第7部分:分规范 金属箔式聚苯乙烯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electric equipment - Part 7: Sectional specification Fixed polystyrene film dielectric metal foil d.c. capacitors |
|||
GB/T 28441-2012 车载导航电子地图数据质量规范(中英文版) Data quality specification for navigation electronic map in vehicle |
|||
GB/T 13977-2012 1:5 000 1:10 000 地形图航空摄影测量外业规范(中英文版) Specifications for aerophotogrammetric field work of 1:5 000 1:10 000 topographic maps |
|||
GB/T 13990-2012 1:5 000 1:10 000 地形图航空摄影测量内业规范(中英文版) Specifications for aerophotogrammetric office operation of 1:5 000 1:10 000 topographic maps |
|||
GB/T 16819-2012 1:500 1:1 000 1:2 000地形图平板仪测量规范(中英文版) Specifications for planetabling of 1:500 1:1 000 1:2 000 topographic maps |
|||
GB/T 27920.2-2012 数字航空摄影规范 第2部分:推扫式数字航空摄影(中英文版) Specifications for digital aerial photography - Part 2: Push-broom digital aerial photography |
|||
GB/T 28445-2012 个人位置导航电子地图数据质量规范(中英文版) Data quality specification for navigation electronic map in personal position |
|||
GB/T 28456-2012 IPsec协议应用测试规范(中英文版) Testing specification for applications of IPsec protocol |
|||
GB/T 28457-2012 SSL协议应用测试规范(中英文版) Testing specification for applications of SSL protocol |
|||
GB/Z 28586-2012 地理信息 基于网络的数据分发规范(中英文版) Geographic information - Web-based data dissemination specification |
|||
GB/T 7430-2012 影像材料 摄影胶片 安全胶片规范(中英文版) Imaging materials - Photographic films - Specifications for safety film |
|||
GB/T 17157-2012 1:25 000 1:50 000 1:100 000地形图航空摄影测量解析测图规范(中英文版) Specifications for aerial photogrammetric analytical mapping of 1:25 000 1:50 000 1:100 000 topographic maps |
|||
GB/T 5968-2011 电子设备用固定电容器 第9部分:分规范 2类瓷介固定电容器(中英文版) Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric,Class 2 |
|||
GB/T 27745-2011 低压电器通信规范(中英文版) Communication specification for low-voltage electrical apparatus |
|||
GB/T 27919-2011 IMU/GPS辅助航空摄影技术规范(中英文版) Specifications for IMU/GPS supported aerial photography |
|||
GB/T 27920.1-2011 数字航空摄影规范 第1部分:框幅式数字航空摄影(中英文版) Specifications for digital aerial photography - Part 1:Frame digital aerial photography |
|||
GB 17589-2011 X射线计算机断层摄影装置质量保证检测规范(中英文版) Specifications for quality assurance test for computed tomography X-ray scanners |
|||
GB/T 27702-2011 信息与文献 信息检索(Z39.50)应用服务定义和协议规范(中英文版) Information and documentation - Information retrieval(Z39.50) - Application service definition and protocol specification |
|||
GB/T 27746-2011 低压电器用金属氧化物压敏电阻器(MOV)技术规范(中英文版) Technical specification for metal oxide varistors(MOV)used in low-voltage apparatus |
|||
GB/T 14566.4-2011 爆破片型式与参数 第4部分:石墨爆破片(中英文版) Specification and type for bursting discs - Part 4:Graphite bursting discs |
|||
GB/T 17850.11-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分:钢渣特种型砂(中英文版) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag |
|||
GB/T 10191-2011 电子设备用固定电容器 第16-1部分:空白详细规范 金属化聚丙烯膜介质直流固定电容器 评定水平E和EZ(中英文版) Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification:Fixed metallized polypropylene film dielectric d.c.capacitors - Assessment levels E and EZ |
|||
GB/T 5967-2011 电子设备用固定电容器 第8-1部分:空白详细规范 1类瓷介固定电容器 评定水平 EZ(中英文版) Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitor of ceramic dielectric,Class 1 - Assessment level EZ |
|||
GB/T 7332-2011 电子设备用固定电容器 第2部分:分规范 金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器(中英文版) Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors |
|||
GB/T 17850.6-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣(中英文版) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag |
|||
GB/T 5966-2011 电子设备用固定电容器 第8部分:分规范 1类瓷介固定电容器(中英文版) Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric,Class 1 |
|||
GB/T 26973-2011 空气源热泵辅助的太阳能热水系统(储水箱容积大于0.6m3)技术规范(中英文版) Specification of solar water heating systems assisted with air-source heat pump(for capacity of water tank more than 0.6 m3) |
找到:542條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 |