中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB 18279-2023 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes |
 |
|
|
|
GB/T 41638.3-2023 塑料 生物基塑料的碳足迹和环境足迹 第3部分：过程碳足迹 量化要求与准则（中英文版） Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints |
|
|
|
|
GB/T 42803-2023 婴童用品 母婴室配套用品通用技术要求（中英文版） Baby and child products General technical requirements for accessories for mother and child room |
|
|
|
|
GB/T 42769-2023 假肢和矫形器 功能缺失 矫形器治疗的患者、临床治疗目标、矫形器功能要求的描述（中英文版） Prosthetics and orthotics Functional deficits Description of patients treated with orthotics, clinical goals of treatment, functional requirements of orthotics |
|
|
|
|
GB/T 37190-2023 管道腐蚀控制工程全生命周期 通用要求（中英文版） General requirements for the entire life cycle of pipeline corrosion control projects |
|
|
|
|
GB/T 33314-2023 腐蚀控制工程全生命周期 通用要求（中英文版） General requirements for the entire life cycle of corrosion control projects |
|
|
|
|
GB/T 32151.14-2023 碳排放核算与报告要求 第14部分：其他有色金属冶炼和压延加工企业（中英文版） Carbon emission accounting and reporting requirements Part 14: Other non-ferrous metal smelting and rolling processing enterprises |
|
|
|
|
GB/T 43629.1-2023 生物技术 核酸合成 第1部分：合成寡核苷酸的生产和质量控制要求（中英文版） Biotechnology Nucleic acid synthesis Part 1: Production and quality control requirements for synthetic oligonucleotides |
|
|
|
|
GB/T 14536.3-2022 电自动控制器 第3部分：电动机热保护器的特殊要求（中英文版） Electric automatic controllers - Part 3: Particular requirements for motor thermal protectors |
|
|
|
|
GB/T 21109.1-2022 过程工业领域安全仪表系统的功能安全 第1部分：框架、定义、系统、硬件和应用编程要求（中英文版） Functional safety of safety instrumented systems in the process industry - Part 1: Framework, definitions, system, hardware and application programming requirements |
|
|
|
|
GB/T 42063-2022 锐器伤害保护 要求与试验方法 一次性使用皮下注射针、介入导管导引针和血样采集针的锐器伤害保护装置（中英文版） Sharps injury protection requirements and test methods - Sharps injury protection devices for disposable hypodermic needles, interventional catheter guide needles and blood sample collection needles |
|
|
|
|
GB 9706.243-2021 医用电气设备 第2-43部分：介入操作X射线设备的基本安全和基本性能专用要求（中英文版） Medical electrical equipment—Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
|
|
|
|
GB/T 40199-2021 城市园林废弃物资源回收和深加工技术要求（中英文版） Technical requirements for resource recovery and further processing of urban garden waste |
|
|
|
|
GB/T 40133-2021 餐厨废油资源回收和深加工技术要求（中英文版） Technical requirements for recycling and further processing of waste cooking oil from restaurant |
|
|
|
|
GB/T 15000.7-2021 标准样品工作导则 第7部分：标准样品生产者能力的通用要求（中英文版） Directives for the work of reference materials—Part 7:General requirements for the competence of reference material producers |
|
|
|
|
GB/T 40864-2021 柔性交流输电设备接入电网继电保护技术要求（中英文版） Technical requirements for relaying protection of flexible alternating current transmission equipment connecting to the system |
|
|
|
|
GB/T 38701-2020 供应链安全管理体系 对供应链安全管理体系审核认证机构的要求（中英文版） Security management systems for the supply chain—Requirements for bodies providing audit and certification of supply chain security management systems |
|
|
|
|
GB/T 32855.2-2020 先进自动化技术及其应用 制造业企业过程互操作性建立要求 第2部分：评价企业互操作性成熟度模型（中英文版） Advanced automation technologies and their applications—Requirements for establishing manufacturing enterprise process interoperability—Part 2: Maturity model for assessing enterprise interoperability |
|
|
|
|
GB/T 37669-2019 自动导引车(AGV)在危险生产环境应用的安全规范（中英文版） Automated guided vehicle（AGV） safety protection requirements in the application of dangerous production atmosphere |
|
|
|
|
GB/T 22380.3-2019 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves |
|
|
|
|
GB/T 22380.2-2019 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers |
|
|
|
|
GB/T 22380.3-2019 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves |
|
|
|
|
GB/T 22380.2-2019 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers |
|
|
|
|
GB/T 35010.6-2018 半导体芯片产品 第6部分：热仿真要求（中英文版） Semiconductor die products—Part 6: Requirements for concerning thermal simulation |
|
|
|
|
GB/T 32151.11-2018 温室气体排放核算与报告要求 第11部分: 煤炭生产企业（中英文版） Requirements of the greenhouse gas emissions accounting and reporting—Part 11: Coal production enterprise |
|
|
|
|
GB/T 36982-2018 节目分配网络ASI数字光端机接口技术要求和测量方法（中英文版） Interface technical requirements and measurement methods of the digital optical line terminal used in program distribution network |
|
|
|
|
GB/T 37278-2018 建立非疫产地和非疫生产点的要求（中英文版） Requirements for the establishment of pest free places of production and pest free production sites |
|
|
|
|
GB/Z 21099.6-2018 过程控制用功能块（FB）和电子设备描述语言（EDDL） 第6部分：满足现场设备工程工具对集成现场总线设备的需求（中英文版） Function blocks(FB) for process control and electronic device description language(EDDL)—Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices |
|
|
|
|
GB/T 34601-2017 防止全地形车转向机构对驾驶员伤害的要求（中英文版） The requirements protecting drivers from being injured by ATV steering mechanism |
|
|
|
|
GB/T 17466.24-2017 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第24部分：住宅保护装置和其他电源功耗电器的外壳的特殊要求（中英文版） Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment |
|
|
|
|
GB/T 33760-2017 基于项目的温室气体减排量评估技术规范 通用要求（中英文版） Technical specification at the project level for assessment of greenhouse gas emission reductions—General requirements |
|
|
|
|
GB/T 22380.1-2017 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求（中英文版） Explosion protected safety technique of the petrol filling station—Part 1: Explosion protected safety technique requirements for fuel filling dispenser |
|
|
|
|
GB/T 18305-2016 质量管理体系 汽车生产件及相关服务件组织应用GB/T 19001—2008的特别要求（中英文版） Quality management systems—Particular requirements for the application of GB/T 19001—2008 for automotive production and relevant service part organizations |
|
|
|
|
GB/T 20111.3-2016 电气绝缘系统 热评定规程 第3部分：包封线圈模型的特殊要求 散绕绕组电气绝缘系统（EIS）（中英文版） Electrical insulation systems—Procedures for thermal evaluation—Part 3: Specific requirements for encapsulated–coil model—Wire–wound electrical insulation system (EIS) |
|
|
|
|
GB/T 32855.1-2016 先进自动化技术及其应用 制造业企业过程互操作性建立要求 第1部分：企业互操作性框架（中英文版） Advanced automation technologies and their applications—Requirements for establishing manufacturing enterprise process interoperability—Part 1: Framework for enterprise interoperability |
|
|
|
|
GB/T 13539.4-2016 低压熔断器 第4部分：半导体设备保护用熔断体的补充要求（中英文版） Low-voltage fuses—Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|
|
|
|
GB/T 14598.149-2016 量度继电器和保护装置 第149部分：电热继电器功能要求（中英文版） Measuring relays and protection equipment—Part 149: Functional requirements for thermal electrical relays |
|
|
|
|
GB/T 20448.2-2016 自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分：回转平台上安装驾驶室和起重臂的机械（中英文版） Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform with a cab and boom on the platform |
|
|
|
|
GB/T 21283.6-2015 密封元件为热塑性材料的旋转轴唇形密封圈 第6部分：热塑性材料与弹性体包覆材料的性能要求（中英文版） Rotary shaft lip-type seals incorporating thermoplastic sealing elements—Part 6: Properties requirements for the thermoplastic and elastic material |
|
|
|
|
GB 16174.1-2015 手术植入物 有源植入式医疗器械 第1部分：安全、标记和制造商所提供信息的通用要求（中英文版） Implants for surgery—Active implantable medical devices—Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
|
|
|
|
GB 18278.1-2015 医疗保健产品灭菌 湿热 第1部分：医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of health care products—Moist heat—Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
|
|
|
|
GB/T 32151.10-2015 温室气体排放核算与报告要求 第10部分：化工生产企业（中英文版） Requirements of the greenhouse gas emissions accounting and reporting —Part 10: Chemical production enterprise |
|
|
|
|
GB/T 32151.9-2015 温室气体排放核算与报告要求 第9部分：陶瓷生产企业（中英文版） Requirements of the greenhouse gas emission accounting and reporting —Part 9: Ceramic production enterprise |
|
|
|
|
GB/T 32151.5-2015 温室气体排放核算与报告要求 第5部分：钢铁生产企业（中英文版） Requirements of the greenhouse gas emission accounting and reporting —Part 5: Iron and steel production enterprises |
|
|
|
|
GB/T 32151.4-2015 温室气体排放核算与报告要求 第4部分：铝冶炼企业（中英文版） Requirements of the greenhouse gas emission accounting and reporting —Part 4: Aluminum smelting production enterprise |
|
|
|
|
GB/T 32151.3-2015 温室气体排放核算与报告要求 第3部分：镁冶炼企业（中英文版） Requirements of the greenhouse gas emission accounting and reporting —Part 3: Magnesium smelting production enterprise |
|
|
|
|
GB/T 20111.1-2015 电气绝缘系统 热评定规程 第1部分：通用要求 低压（中英文版） Electrical insulation systems—Procedures for thermal evaluation—Part 1: General requirements—Low-voltage |
|
|
|
|
GB/T 30659-2014 假肢和矫形器 要求和试验方法（中英文版） External limb prostheses and external orthoses―Requirements and test methods |
|
|
|
|
GB/T 31181-2014 假肢 踝足装置和足部组件 要求和试验方法（中英文版） Prosthetics―Testing of ankle-foot devices and foot units―Requirements and test methods |
|
|
|
|
GB 10827.1-2014 工业车辆 安全要求和验证 第1部分：自行式工业车辆（除无人驾驶车辆、伸缩臂式叉车和载运车）（中英文版） Industrial trucks――Safety requirements and verification―Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
|
|
|
|
GB/T 10827.1-2014 工业车辆 安全要求和验证 第1部分：自行式工业车辆（除无人驾驶车辆、伸缩臂式叉车和载运车）（中英文版） Industrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks |
|
|
|
|
GB/T 30445-2013 在职人员评估服务 服务提供者要求（中英文版） The assessment service for people in work and organizational settings—Requirements for service providers |
|
|
|
|
GB/Z 30249-2013 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程（中英文版） Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series |
|
|
|
|
GB/T 29510-2013 个体防护装备配备基本要求（中英文版） General requirements for the distribution of personal protection equipment |
|
|
|
|
GB/T 13539.6-2013 低压熔断器 第6部分：太阳能光伏系统保护用熔断体的补充要求（中英文版） Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
|
|
|
|
GB/T 15000.7-2012 标准样品工作导则（7） 标准样品生产者能力的通用要求（中英文版） Directives for the work of reference materials(7) - General requirements for the competence of reference material producers |
|
|
|
|
GB 15735-2012 金属热处理生产过程安全、卫生要求（中英文版） Requirements for the safety and health in production process of metal heat treatment |
|
|
|
|
GB/T 28387.5-2012 印刷机械和纸加工机械的设计及结构安全规则 第5部分：瓦楞纸板生产机械以及纸板和瓦楞纸板加工设备（中英文版） Safety requirements of the design and construction of printing and paper converting machines - Part 5：Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
|
|
|
|
GB/T 26678-2011 机床电气控制系统 数控平面磨床的加工程序要求（中英文版） Electrical control system of machine tool - The requirements of processing program for CNC surface grinding machines |
|
|
|
|
GB 16362-2010 远距治疗患者放射防护与质量保证要求（中英文版） The requirements for quality assurance and radiological protection for patients in teletherapy |
|
|
|
|
GB/T 23718.3-2010 机器状态监测与诊断 人员资格与人员评估的要求 第3部分：对培训机构和培训过程的要求（中英文版） Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training process |
|
|
|
|
GB 22380.3-2010 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves |
|
|
|
|
GB 22380.2-2010 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求（中英文版） Explosion protected safety technique of the petrol filling station - Part 2: Safety requirements for construction and performance of safe breaks for use on dispensers |
|
|
|
|
GB/T 25000.51-2010 软件工程 软件产品质量要求和评价（SQuaRE） 商业现货（COTS）软件产品的质量要求和测试细则（中英文版） Software engineering - Software product quality requirements and evaluation (SQuaRE) - Requirements for quality of commercial off-the-self (COTS) software product and instructions for testing |
|
|
|
|
GB/T 12467.1-2009 金属材料熔焊质量要求 第1部分：质量要求相应等级的选择准则（中英文版） Quality reqirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements |
|
|
|
|
GB/T 23718.1-2009 机器状态监测与诊断 人员培训与认证的要求 第1部分：对认证机构和认证过程的要求（中英文版） Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 1: Requirements for certifying bodies and the certification process |
|
|
|
|
GB/T 14093.4-2009 机械产品环境技术要求 工业腐蚀环境（中英文版） Environmental technology requirements of machinery products for the industry - Corrosion environments |
|
|
|
|
GB/T 14093.1-2009 机械产品环境技术要求 湿热环境（中英文版） Environmental technical requirements of machinery products for the warm-damp environments |
|
|
|
|
GB/T 13539.4-2009 低压熔断器 第4部分：半导体设备保护用熔断体的补充要求（中英文版） Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|
|
|
|
GB/T 23561.1-2009 煤和岩石物理力学性质测定方法 第1部分：采样一般规定（中英文版） Methods for determining the physical and mechanical properties of coal and rock - Part 1: General requirements for sampling |
|
|
|
|
GB 14536.5-2008 家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求（中英文版） Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
|
|
|
|
GB 14536.4-2008 家用和类似用途电自动控制器 管形荧光灯镇流器热保护器的特殊要求（中英文版） Automatic electrical controls for household and similar use - Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
|
|
|
|
GB/T 20111.3-2008 电气绝缘系统 热评定规程 第3部分：包封线圈模型的特殊要求 散绕绕组电气绝缘系统(EIS)（中英文版） Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model - Wire-wound electrical insulation system(EIS) |
|
|
|
|
GB/T 12801-2008 生产过程安全卫生要求总则（中英文版） General principles for the requirements of safety and health in production process |
|
|
|
|
GB/T 20111.2-2008 电气绝缘系统 热评定规程 第2部分：通用模型的特殊要求 散绕绕组应用（中英文版） Electrical insulation systems - Procedures for thermal evaluation - Part 2: Specific requirements for general-purpose models - Wire-wound applications |
|
|
|
|
GB/T 16510-2008 辐射加工剂量学校准实验室的能力要求（中英文版） The requirements for the competence of a radiation processing dosimetry calibration laboratory |
|
|
|
|
GB 22380.1-2008 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求（中英文版） Explosion protected safety technique of the petrol filling station - Part 1: Explosion protected safety technique requirements for fuel filling dispenser |
|
|
|
|
GB 14536.3-2008 家用和类似用途电自动控制器 电动机热保护器的特殊要求（中英文版） Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors |
|
|
|
|
GB/T 13459-2008 劳动防护服 防寒保暖要求（中英文版） The requirements on insulation of labour protective clothing in cold condition |
|
|
|
|
GB/T 21642.2-2008 基于IP网络的视讯会议系统设备技术要求 第2部分: 多点处理器（MP）（中英文版） The technical requirements for video conference system devices based on IP-based network - Part 2: Multipoint Processor |
|
|
|
|
GB/T 9043-2008 通信设备过电压保护用气体放电管通用技术条件（中英文版） General technical requirements of gas discharge tubes for the over-voltage protection of telecommunications installations |
|
|
|
|
GB 4793.8-2008 测量、控制和试验室用电气设备的安全要求 第2-042部分：使用有毒气体处理医用材料及供试验室用的压力灭菌器和灭菌器的专用要求（中英文版） Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials,and for laboratory processes |
|
|
|
|
GB/T 21405-2008 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求（中英文版） Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
|
|
|
|
GB/T 21109.1-2007 过程工业领域安全仪表系统的功能安全 第1部分：框架、定义、系统、硬件和软件要求（中英文版） Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements |
|
|
|
|
GB 9706.23-2005 医用电气设备 第2-43部分:介入操作 X射线设备安全专用要求（中英文版） Medical electrical equipment-Part 2-43:Particular requirements for the safety of X-ray equipment for interventional procedures |
|
|
|
|
GB/T 3382.2-2003 文件传真三类机在电话网中的互通技术条件 第2部分:在公用电话交换网上的文件传真传输规程（中英文版） Technical requirements for group 3 facsimile apparatus used in public telephone network--Part 2:Procedures for document facsimile transmission in the general switched telephone network |
|
|
|
|
GB/T 18305-2003 质量管理体系 汽车生产件及相关服务件组织应用GB/T 19001-2000的特别要求（中英文版） Quality management systems--Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
|
|
|
|
GB 4793.4-2001 测量、控制及实验室用电气设备的安全 实验室用处理医用材料的蒸压器的特殊要求（中英文版） Safety requirements for electrical equipment for measurement，control and laboratory use--Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process |
|
|
|
|
GB 18464-2001 医用X射线治疗放射卫生防护要求（中英文版） Requirements for radiological protectionin medical X-ray therapy |
|
|
|
|
GB/T 16895.9-2000 建筑物电气装置 第7部分:特殊装置或场所的要求 第707节:数据处理设备用电气装置的接地要求（中英文版） Electrical installations of buildings--Part 7:Requirements for special installations or locations--Section 707:Earthing requirements for the electrical installation of data processing equipment |
|
|
|
|
GB 5083-1999 生产设备安全卫生设计总则（中英文版） General rules for designing the production facilities in accordance with safety and health requirements |
|
|
|
|
GB/T 16463-1996 广播节目声音质量主观评价方法和技术指标要求（中英文版） The method of subjective assessment of the sound quality for broadcast programmes and the technical parameters requirements |
|
| 找到:92條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |
