中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43118-2023 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法(中英文版) Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances |
|||
GB/T 43092-2023 锂离子电池正极材料电化学性能测试 高温性能测试方法(中英文版) Electrochemical performance testing of lithium-ion battery cathode materials High temperature performance testing method |
|||
GB/T 42667-2023 精细陶瓷室温等双轴弯曲强度试验方法 双环法(中英文版) Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method |
|||
GB/T 42900-2023 金属材料 高应变速率高温压缩试验方法(中英文版) High strain rate and high temperature compression test method for metallic materials |
|||
GB/T 42912-2023 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法(中英文版) Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids |
|||
GB/T 42913-2023 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法(中英文版) Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids |
|||
GB/T 42655-2023 连续纤维增强陶瓷基复合材料高温压缩性能试验方法(中英文版) Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites |
|||
GB/T 42657-2023 红外光学玻璃红外折射率温度系数测试方法 垂直入射法(中英文版) Test method for infrared refractive index temperature coefficient of infrared optical glass - vertical incidence method |
|||
GB/T 42910-2023 无机胶粘剂高温压缩剪切强度试验方法(中英文版) Test method for high temperature compression shear strength of inorganic adhesives |
|||
GB/T 5989-2023 耐火材料 荷重软化温度试验方法(示差升温法)(中英文版) Refractories - Test method for softening temperature under load (differential heating method) |
|||
GB/T 42603.2-2023 熔模铸造中温模料 第2部分:使用性能试验方法(中英文版) Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability |
|||
GB/T 42603.1-2023 熔模铸造中温模料 第1部分:物理性能试验方法(中英文版) Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties |
|||
GB/T 6803-2023 铁素体钢的无塑性转变温度落锤试验方法(中英文版) Drop weight test method for non-plastic transition temperature of ferritic steels |
|||
GB/T 43255-2023 燃料电池电动汽车低温冷起动性能试验方法(中英文版) Test method for low temperature cold starting performance of fuel cell electric vehicles |
|||
GB/T 1964-2023 多孔陶瓷 室温压缩强度试验方法(中英文版) Porous ceramics - Test method for compressive strength at room temperature |
|||
GB/T 1965-2023 多孔陶瓷 室温弯曲强度试验方法(中英文版) Porous ceramics - test method for room temperature flexural strength |
|||
GB/T 43296-2023 精细陶瓷室温弯曲疲劳性能试验方法(中英文版) Test method for room temperature bending fatigue properties of fine ceramics |
|||
GB/T 5170.18-2022 环境试验设备检验方法 第18部分:温度/湿度组合循环试验设备(中英文版) Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment |
|||
GB/T 41605-2022 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法(中英文版) Silicon nitride materials for rolling bearing balls - Test method for indentation fracture resistance at room temperature - Indentation method |
|||
GB/T 41490-2022 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法(中英文版) Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method |
|||
GB/T 24581-2022 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法(中英文版) Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low temperature FT-IR analysis method |
|||
GB/T 42261-2022 金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法(中英文版) Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under temperature gradient |
|||
GB/T 12085.23-2022 光学和光子学 环境试验方法 第23部分:低压与低温、大气温度、高温或湿热综合试验(中英文版) Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat |
|||
GB/T 41641-2022 力学性能测量 REBCO带材室温拉伸试验方法(中英文版) Measurement of mechanical properties - Tensile test method for REBCO strip at room temperature |
|||
GB/T 41872-2022 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法(中英文版) Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method |
|||
GB/T 1425-2021 贵金属及其合金熔化温度范围的测定 热分析试验方法(中英文版) Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis |
|||
GB/T 40396-2021 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法(DMA)(中英文版) Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis(DMA) |
|||
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
|||
GB/T 19216.2-2021 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not |
|||
GB/T 40286-2021 低温双循环余热回收利用装置性能测试方法(中英文版) The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization |
|||
GB/T 19216.3-2021 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure |
|||
GB/T 39933-2021 滚塑成型 低温冲击试验(中英文版) Rotational moulding—Test method for low temperature impact |
|||
GB/T 39828-2021 陶瓷厚涂层的高温弹性模量试验方法(中英文版) Test method for determining elastic modulus of thick ceramic coating at elevated temperature |
|||
GB/T 19136-2021 农药热储稳定性测定方法(中英文版) Testing method of the accelerated storage stability at elevated temperature for pesticides |
|||
GB/T 38924.4-2020 民用轻小型无人机系统环境试验方法 第4部分:温度和高度试验(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 4: Temperature and altitude test |
|||
GB/T 38924.3-2020 民用轻小型无人机系统环境试验方法 第3部分:高温试验(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test |
|||
GB/T 38924.2-2020 民用轻小型无人机系统环境试验方法 第2部分: 低温试验(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test |
|||
GB/T 38804-2020 金属材料高温蒸汽氧化试验方法(中英文版) Test method for oxidation of metallic materials exposed in high-temperature steam |
|||
GB/T 38912-2020 锆管室温闭端爆破试验方法(中英文版) Test method for closed-end burst of zirconium tubes at room temperature |
|||
GB/T 38534-2020 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法(中英文版) Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature |
|||
GB/T 32065.8-2020 海洋仪器环境试验方法 第8部分:温度变化试验(中英文版) Environmental test methods for oceanographic instruments—Part 8:Change of temperature test |
|||
GB/T 38426-2019 睡袋的热阻和使用温度的测定方法(中英文版) Test method for thermal resistance and use temperature of sleeping bags |
|||
GB/T 37631-2019 化学纤维 热分解温度试验方法(中英文版) Man-made fiber—Test method for thermal decomposition temperature |
|||
GB/T 13477.13-2019 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定(中英文版) Test method for building sealants-Part 13:Determination of adhesion/cohesion properties at variable temperatures |
|||
GB/T 37945-2019 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法(中英文版) Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 38298-2019 固体化学品自动点火温度的试验方法(中英文版) Test method of auto-ignition temperature for solid chemicals |
|||
GB/T 38430-2019 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法(中英文版) Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
|||
GB/T 23711.2-2019 塑料衬里压力容器试验方法 第2部分:耐低温试验(中英文版) Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 38298-2019 固体化学品自动点火温度的试验方法(中英文版) Test method of auto-ignition temperature for solid chemicals |
|||
GB/T 23711.3-2019 塑料衬里压力容器试验方法 第3部分:耐高温检验(中英文版) Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection |
|||
GB/T 14235.1-2018 熔模铸造低温模料-第1部分:物理性能试验方法(中英文版) Low temperature pattern wax material for investment casting—Part 1: Testing methods for physical properties |
|||
GB/T 4937.15-2018 半导体器件 机械和气候试验方法 第15部分:通孔安装器件的耐焊接热(中英文版) Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices |
|||
GB/T 36267-2018 钢化玻璃单位产品能耗测试方法(中英文版) Test method of energy consumption per unit products for tempered glass |
|||
GB/T 36264-2018 超高温氧化环境下纤维复合材料拉伸强度试验方法(中英文版) Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment |
|||
GB/T 14235.2-2018 熔模铸造低温模料-第2部分:使用性能试验方法(中英文版) Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties |
|||
GB/T 37052-2018 光伏建筑一体化(BIPV)组件电池额定工作温度测试方法(中英文版) Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules |
|||
GB/T 5170.19-2018 环境试验设备检验方法-第19部分:温度、振动(正弦)综合试验设备(中英文版) Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment |
|||
GB/T 13477.12-2018 建筑密封材料试验方法-第12部分:同一温度下拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants-Part 12:Determination of adhesion/cohesion properties at constant temperature |
|||
GB/T 34699-2017 低温硫磺尾气加氢催化剂物理性能试验方法(中英文版) Test method of physical properties for low temperature sulphur tail gas hydrogenation catalyst |
|||
GB/T 34520.7-2017 连续碳化硅纤维测试方法 第7部分:高温强度保留率(中英文版) Test methods for continuous silicon carbide fiber—Part 7 :High temperature strength retention rate |
|||
GB/T 34614-2017 光伏玻璃 温和气候下城市环境自然曝露试验方法及性能评价(中英文版) Photovoltaic(PV)glass—Test method and performance evaluation of exposure to urban environment in temperate climate |
|||
GB/T 1817-2017 硬质合金常温冲击韧性试验方法(中英文版) Test method for impact toughness of cemented carbides at room temperature |
|||
GB/T 34551-2017 玻璃纤维增强复合材料筋高温耐碱性试验方法(中英文版) Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition |
|||
GB/T 34228-2017 耐热浸胶帆布 高温粘合性能试验方法(中英文版) Dipped heat-resistant canvas―Test method for adhesion strength at high temperature |
|||
GB/T 34233-2017 低温硫磺尾气加氢催化剂活性试验方法(中英文版) Test method of activity for low temperature sulphur tail gas hydrogenation catalyst |
|||
GB/T 33861-2017 高低温试验箱能效测试方法(中英文版) Testing method of energy efficiency for temperature test chambers |
|||
GB/T 35306-2017 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法(中英文版) Test method for carbon and oxygen content of single crystal silicon—Low temperature fourier transform infrared spectrometry |
|||
GB/T 5170.2-2017 环境试验设备检验方法 第2部分:温度试验设备(中英文版) Inspection methods for environmental testing equipments—Part 2: Temperature testing equipments |
|||
GB/T 5170.10-2017 环境试验设备检验方法 第10部分:高低温低气压试验设备(中英文版) Inspection methods for environmental testing equipments—Part 10:Combined high and low temperature/low air pressure testing equipments |
|||
GB/T 11297.10-2015 热释电材料居里温度Tc的测试方法(中英文版) Test method for Curie temperature of pyroelectric materials |
|||
GB/T 7166-2015 核电厂反应堆堆芯和主冷却剂回路内温度计的特性和试验方法(中英文版) Characteristics and test methods for in-core and primary coolant circuit temperature sensors in nuclear power plants |
|||
GB/T 31967.1-2015 稀土永磁材料物理性能测试方法 第1部分:磁通温度特性的测定(中英文版) Test method for physical property of rare earth permanent magnetic materials—Part 1:Determination of temperature coefficient of magnetic flux |
|||
GB/T 31544-2015 玻璃材料高温弹性性能试验方法 脉冲激振法(中英文版) Test method for elastic properties of glass at high temperatures—Impulse excitation of vibration |
|||
GB/T 31405-2015 管道耐蚀涂敷层高温阴极剥离试验方法(中英文版) Standard test method for cathodic disbonding of pipeline coatings subjected to elevated temperatures |
|||
GB/T 31192-2014 常温铜系脱砷剂砷容试验方法(中英文版) Test method of arsenic content for copper series arsenic removal capacity at room temperature |
|||
GB/T 31191-2014 常温锰系脱氧剂脱氧性能试验方法(中英文版) Test method of manganese deoxidizer deoxy performance at room temperature |
|||
GB/T 30824-2014 燃气热处理炉温度均匀性测试方法(中英文版) Testing method for temperature uniformity of gas heat treatment furnace |
|||
GB/T 11145-2014 润滑剂低温黏度的测定 勃罗克费尔特黏度计法(中英文版) Standard test method for measurement of low-temperature viscosity of lubricants―Brookfield viscometer method |
|||
GB/T 5169.13-2013 电工电子产品着火危险试验 第13部分:灼热丝/热丝基本试验方法 材料的灼热丝起燃温度(GWIT)试验方法(中英文版) Fire hazard testing for electric and electronic product―Part 13:Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials |
|||
GB/T 30103.1-2013 冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版) Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing |
|||
GB/T 29459.2-2012 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法(中英文版) Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature |
|||
GB/T 29174-2012 物质恒温稳定性的热分析试验方法(中英文版) Thermal analysis test method for constant-temperature stability of materials |
|||
GB/T 28958-2012 乘用车低温性能试验方法(中英文版) Test methods of low temperature performance for passenger car |
|||
GB/T 9292-2012 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法(中英文版) Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition |
|||
GB/T 27970-2011 非金属垫片材料烧失量试验方法(中英文版) Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures |
|||
GB/T 7962.16-2010 无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版) Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature |
|||
GB/T 14634.7-2010 灯用稀土三基色荧光粉试验方法 第7部分:热猝灭性的测定(中英文版) Test methods of rare earth three-band phosphors for fluorescent lamps - Part 7: Determination of temperature quenching |
|||
GB 12476.8-2010 可燃性粉尘环境用电气设备 第8部分: 试验方法 确定粉尘最低点燃温度的方法(中英文版) Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust |
|||
GB/T 23595.7-2010 白光LED灯用稀土黄色荧光粉试验方法 第7部分:热猝灭性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 7: Determination of temperature quenching |
|||
GB/T 24581-2009 低温傅立叶变换红外光谱法测量硅单晶中III、V族杂质含量的测试方法(中英文版) Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities |
|||
GB/T 24276-2009 评估部分型式试验的低压成套开关设备和控制设备(PTTA)温升的外推法(中英文版) A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear |
|||
GB/T 23806-2009 精细陶瓷断裂韧性试验方法 单边预裂纹梁(SEPB)法(中英文版) Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
|||
GB/T 23805-2009 精细陶瓷室温拉伸强度试验方法(中英文版) Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
|||
GB/T 16534-2009 精细陶瓷室温硬度试验方法(中英文版) Fine ceramics(advanced ceramics,advanced technical ceramics)- Test method for hardness of monolithic ceramics at room temperature |
|||
GB/T 23711.3-2009 氟塑料衬里压力容器 耐高温试验方法(中英文版) High temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 23711.2-2009 氟塑料衬里压力容器 耐低温试验方法(中英文版) Low temperature test method for pressure vessels lined with fluoroplastics |
|||
GB/T 4074.7-2009 绕组线试验方法 第7部分:测定漆包绕组线温度指数的试验方法(中英文版) Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires |
|||
GB/T 4074.8-2009 绕组线试验方法 第8部分:测定漆包绕组线温度指数的试验方法 快速法(中英文版) Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method |
|||
GB/T 22567-2008 电气绝缘材料 测定玻璃化转变温度的试验方法(中英文版) Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
|||
GB/T 14390-2008 精细陶瓷高温弯曲强度试验方法(中英文版) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature |
|||
GB/T 22307-2008 密封垫片高温抗压强度试验方法(中英文版) Standard test method for compressive strength of gaskets at elevated temperatures |
|||
GB/T 9343-2008 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定(中英文版) Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature |
|||
GB/T 22052-2008 用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法(中英文版) Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope |
|||
GB/T 2951.51-2008 电缆和光缆绝缘和护套材料通用试验方法 第51部分:填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component |
|||
GB/T 2951.42-2008 电缆和光缆绝缘和护套材料通用试验方法 第42部分:聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi |
|||
GB/T 2951.31-2008 电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking |
|||
GB/T 2951.14-2008 电缆和光缆绝缘和护套材料通用试验方法 第14部分:通用试验方法 低温试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature |
|||
GB/T 3903.18-2008 鞋类 帮面试验方法 高温性能(中英文版) Footwear - Test methods for uppers - High temperature behaviour |
|||
GB/T 5170.10-2008 电工电子产品环境试验设备检验方法 高低温低气压试验设备(中英文版) Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments |
|||
GB/T 5170.2-2008 电工电子产品环境试验设备检验方法 温度试验设备(中英文版) Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments |
|||
GB/T 2423.102-2008 电工电子产品环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(正弦)综合(中英文版) Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) |
|||
GB/T 9291-2008 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法(中英文版) Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions |
|||
GB/T 6803-2008 铁素体钢的无塑性转变温度落锤试验方法(中英文版) Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels |
|||
GB/T 21860-2008 液体化学品自燃温度的试验方法(中英文版) Liquid chemicals - Test method for the autoignition temperature |
|||
GB/T 21859-2008 气体和蒸气点燃温度的测定方法(中英文版) Method of test for ignition temperature of gases and vapours |
|||
GB/T 21613-2008 危险品 自加速分解温度试验方法(中英文版) Dangerous goods - Test method for determination of the accelerating decomposition temperature |
|||
GB/T 15972.52-2008 光纤试验方法规范 第52部分:环境性能的测量方法和试验程序 温度循环(中英文版) Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature |
|||
GB/T 7702.9-2008 煤质颗粒活性炭试验方法 着火点的测定(中英文版) Test method for granular activated carbon from coal - Determination of ignition temperature |
|||
GB/T 5332-2007 可燃液体和气体引燃温度试验方法(中英文版) Method of test for ignition temperature of flammable liquids and gases |
|||
GB/T 328.15-2007 建筑防水卷材试验方法 第15部分:高分子防水卷材 低温弯折性(中英文版) Test methods for building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature |
|||
GB/T 328.14-2007 建筑防水卷材试验方法 第14部分:沥青防水卷材 低温柔性(中英文版) Test methods for building sheets for waterproofing - Part 14: Bitumen sheets for waterproofing-flexibility at low temperature |
|||
GB/T 328.11-2007 建筑防水卷材试验方法 第11部分:沥青防水卷材 耐热性(中英文版) Test methods for building sheets for waterproofing - Part 11: Bitumen sheets for waterproofing-flow resistance at elevated temperature |
|||
GB/T 20450-2006 活性炭着火点测试方法(中英文版) Test method for ignition temperature of activated carbon |
|||
GB/T 6569-2006 精细陶瓷弯曲强度试验方法(中英文版) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature |
|||
GB/T 10581-2006 绝缘材料在高温下电阻和电阻率的试验方法(中英文版) Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
|||
GB/T 5170.18-2005 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments |
|||
GB/T 6148-2005 精密电阻合金电阻温度系数测试方法(中英文版) Test method for temperature-resistance coefficient of precision resistance alloys |
|||
GB/T 5170.19-2005 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备(中英文版) Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments |
|||
GB/T 19137-2003 农药低温稳定性测定方法(中英文版) Testing method for the storage stability at lowtemperature of pesticides |
|||
GB/T 19136-2003 农药热贮稳定性测定方法(中英文版) Testing method for the storage stability at elevated temperature of pesticides |
|||
GB/T 8243.3-2003 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature |
|||
GB/T 5137.3-2002 汽车安全玻璃试验方法 第3部分:耐辐照高温潮湿燃烧和耐模拟气候试验(中英文版) Road vehicles--Safety glazing materials--Part 3:Test methods for resistance to radiation,high temperature,humidity,fire and simulated weathering |
|||
GB/T 13477.12-2002 建筑密封材料试验方法 第12部分:同一温度下拉伸-压缩循环后粘结性的测定(中英文版) Test method for building sealants--Part 12:Determination of adhesion/cohesion properties at constant temperature |
|||
GB/T 13477.7-2002 建筑密封材料试验方法 第7部分:低温柔性的测定(中英文版) Test method for building sealants--Part 7:Determination of low-temperature flexibility |
|||
GB/T 13477.13-2002 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定(中英文版) Test method for building sealants--Part 13:Determination of adhesion/cohesion properties at variable temperatures |
|||
GB/T 4067-1999 金属材料电阻温度特征参数的测定(中英文版) Testing method for electrical resistance-temperature characteristic parameters of metallic materials |
|||
GB/T 6427-1999 压电陶瓷振子频率温度稳定性的测试方法(中英文版) Test method for frequency temperature stability of piezoelectric ceramic vibrator |
|||
GB/T 17711-1999 钇钡铜氧(123相)超导薄膜临界温度Tc的直流电阻试验方法(中英文版) The DC electric resistance test method for the critical temperature Tc of a YBa2Cu3O7-δ superconducting thin film |
|||
GB/T 17339-1998 汽车安全玻璃耐化学浸蚀性和耐温度变化性试验方法(中英文版) Road vehicles--Safety glazing materials--Test methods for resistant-to-chemicals and resistant-to-temperature changes |
|||
GB/T 1425-1996 贵金属及其合金熔化温度范围的测定 热分析试验方法(中英文版) Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis |
|||
GB/T 13823.16-1995 振动与冲击传感器的校准方法 温度响应比较测试法(中英文版) Methods for calibrationof vibration and shock pick-ups--Testing of temperature response by comparison |
|||
GB/T 13823.15-1995 振动与冲击传感器的校准方法 瞬变温度灵敏度测试法(中英文版) Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity |
|||
GB/T 15309-1994 船舶货舱温湿度仪技术要求及试验方法(中英文版) Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel |
|||
GB/T 11297.10-1989 热释电材料居里温度 TC 的测试方法(中英文版) Test method for curie temperature of TC pyroelectric materials |
|||
GB/T 11310-1989 压电陶瓷材料性能测试方法 相对自由介电常数温度特性的测试(中英文版) Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants |
找到:147條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |