中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 42951-2023
计时仪器 硬材料制造的手表外观件 一般要求和试验方法(中英文版)
Timing instruments. Appearance parts of watches made of hard materials. General requirements and test methods.
  GB/T 42554-2023
计量器具环境试验的通用要求(中英文版)
General requirements for environmental testing of measuring instruments
  GB/T 42399.3-2023
无损检测仪器 相控阵超声设备的性能与检验 第3部分:组合系统(中英文版)
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: Combined systems
  GB/T 42399.2-2023
无损检测仪器 相控阵超声设备的性能与检验 第2部分:探头(中英文版)
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 2: Probes
  GB/T 42399.1-2023
无损检测仪器 相控阵超声设备的性能与检验 第1部分:仪器(中英文版)
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 1: Instruments
  GB/T 21838.3-2022
金属材料 硬度和材料参数的仪器化压入试验 第3部分:标准块的标定(中英文版)
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks
  GB/T 21838.2-2022
金属材料 硬度和材料参数的仪器化压入试验 第2部分:试验机的检验和校准(中英文版)
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines
  GB/Z 41476.4-2022
无损检测仪器 1MV以下X射线设备的辐射防护规则 第4部分:控制区域的计算(中英文版)
Non destructive testing instruments - radiation protection rules for X-ray equipment up to 1mV - Part 4: Calculation of control area
  GB/Z 41476.3-2022
无损检测仪器 1MV以下X射线设备的辐射防护规则 第3部分:450kV以下X射线设备辐射防护的计算公式和图表(中英文版)
Non destructive testing instruments - radiation protection rules for X-ray equipment below 1mV - Part 3: calculation formulas and charts for radiation protection of X-ray equipment below 450kv
  GB/T 12810-2021
实验室玻璃仪器 玻璃量器的容量校准和使用方法(中英文版)
Laboratory glassware—Capacity methods testing and use of volumetric instruments
  GB/T 40023-2021
无损检测仪器 超声衍射声时检测仪 技术要求(中英文版)
Non-destructive testing instruments - Ultrasonic time-of-flight diffraction instrument - Technical requirements
  GB/T 39849-2021
无损检测仪器 超声衍射声时检测仪 性能测试方法(中英文版)
Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
  GB/T 40968-2021
乐器产品中多环芳烃的测试方法(中英文版)
Test method of polycylic aromatic hydrocarbons in musical instrument
  GB/T 39555-2020
智能实验室 仪器设备 气候、环境试验设备的数据接口(中英文版)
Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment
  GB/T 18779.5-2020
产品几何技术规范(GPS) 工件与测量设备的测量检验 第5部分:指示式测量仪器的检验不确定度(中英文版)
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
  GB/T 39635-2020
金属材料 仪器化压入法测定压痕拉伸性能和残余应力(中英文版)
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
  GB/T 32065.8-2020
海洋仪器环境试验方法 第8部分:温度变化试验(中英文版)
Environmental test methods for oceanographic instruments—Part 8:Change of temperature test
  GB/T 37930-2019
无损检测仪器 汽车轮毂X射线实时成像检测仪技术要求(中英文版)
Non-destructive testing instruments—Technical specifications of X-ray real-time imaging system for automobile wheel
  GB/T 37929-2019
无损检测仪器 X射线管寿命试验方法(中英文版)
Non-destructive testing instruments—Testing methods for life of X-ray tubes
  GB/T 1043.2-2018
塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验(中英文版)
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
  GB/T 36071-2018
无损检测仪器 X射线实时成像系统检测仪技术要求(中英文版)
Non-destructive testing instruments—technical requirements of X-ray real-time imaging system
  GB/T 36015-2018
无损检测仪器 工业X射线数字成像装置性能和检测规则(中英文版)
Non-destructive testing instruments—Performance and testintg rules of industrial digital X-ray imaging system
  GB/T 34807-2017
岩土工程仪器设备的检验测试通用技术规范(中英文版)
General technical specifications for inspection and test of geotechnical engineering instruments & equipment
  GB/T 34578-2017
火力发电厂热工仪表与执行装置运行维护与试验技术规程(中英文版)
Technical requirements for operation,maintenance and test of instrumentation and actuating equipment in thermal power plant
  GB/T 33888-2017
无损检测仪器 超声测厚仪特性与验证(中英文版)
Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment
  GB/T 35259-2017
纺织品 色牢度试验 试样颜色随照明体变化的仪器评定方法(CMCCON02)(中英文版)
Textiles—Tests for colour fastness—Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant(CMCCON02)
  GB/T 9359-2016
水文仪器基本环境试验条件及方法(中英文版)
Basic conditions and methods of environmental test for hydrological instrument
  GB/T 32616-2016
纺织品色牢度试验 试样变色的仪器评级方法(中英文版)
Textiles—Tests for colour fastness—instrumental assessment of change in color for determination of grey scale rating
  GB/T 32598-2016
纺织品 色牢度试验 贴衬织物沾色的仪器评级方法(中英文版)
Textile—Tests for colour fastness—Method for the instrumental assessment of staining of adjiacent fabrics
  GB/T 16896.2-2016
高电压和大电流试验测量用仪器和软件 第2部分:对冲击电压和冲击电流试验用软件的要求(中英文版)
Instruments and software used for measurement in high-voltage and high-current tests—Part 2: Requirements for software for tests with impulse voltages and currents
  GB/T 32267-2015
分析仪器性能测定术语(中英文版)
Terminology of performance testing for analytical instrument
  GB/T 32277-2015
硅的仪器中子活化分析测试方法(中英文版)
Test method for instrumental neutron activation analysis (INAA) of silicon
  GB/T 29302-2012
无损检测仪器 相控阵超声检测系统的性能与检验(中英文版)
Non-destructive testing instruments - Characterization and verification of phased array ultrasonic examination systems
  GB/T 29247-2012
工业自动化仪表通用试验方法(中英文版)
General methods for testing the performance of industrial process measurement and control instruments
  GB/T 28880-2012
无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定(中英文版)
Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
  GB/T 27669-2011
无损检测 超声检测 超声检测仪电性能评定(中英文版)
Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
  GB/T 27664.1-2011
无损检测 超声检测设备的性能与检验 第1部分:仪器(中英文版)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1:Instruments
  GB/T 26834-2011
无损检测仪器 小焦点及微焦点X射线管有效焦点尺寸测量方法(中英文版)
Non-destructive testing instruments - Measurement of effective focal spot size of mini and micro focus X-ray tubes
  GB/T 26594-2011
无损检测仪器 工业用X射线管性能测试方法(中英文版)
Non-destructive testing instruments - Properties test methods of industrial X-ray tube
  GB/T 26593-2011
无损检测仪器 工业用X射线CT装置性能测试方法(中英文版)
Non-destructive testing instruments - Properties test method for performance of industrial X-ray computed tomography(CT)equipment
  GB/T 26592-2011
无损检测仪器 工业X射线探伤机 性能测试方法(中英文版)
Non-destructive testing instruments - Properties test methods of industrial X-ray apparatus
  GB/T 12085.1-2010
光学和光学仪器 环境试验方法 第1部分:术语、试验范围(中英文版)
Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing
  GB/T 25898-2010
仪器化纳米压入试验方法 薄膜的压入硬度和弹性模量(中英文版)
Instrumented nanoindentation test - Indentation hardness and modulus of thin film
  GB/T 25480-2010
仪器仪表运输、贮存基本环境条件及试验方法(中英文版)
Basic environmental conditions and testing methods for transportation and storage of instruments
  GB/T 24105-2009
岩土工程仪器基本环境试验条件及方法(中英文版)
Basic conditions and methods of environmental test for geotechnical engineering instrument
  GB/T 24110-2009
进出口笔类产品笔帽和端盖安全要求及测试方法(中英文版)
Safety requirements and tests for caps and end closures of writing and marking instruments for import and export
  GB/T 23467-2009
用假人评估轰燃条件下服装阻燃性能的测试方法(中英文版)
Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin
  GB/T 22458-2008
仪器化纳米压入试验方法通则(中英文版)
General rules of instrumented nanoindentation test
  GB/T 1043.1-2008
塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验(中英文版)
Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test
  GB/T 21838.3-2008
金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定(中英文版)
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
  GB/T 21838.2-2008
金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准(中英文版)
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
  GB/T 13634-2008
单轴试验机检验用标准测力仪的校准(中英文版)
Calibration of force-proving instruments used for the verification of uniaxlial testing machines
  GB/T 11606-2007
分析仪器环境试验方法(中英文版)
Methods of environmental test for analytical instruments
  GB/T 14282.1-2006
仪表着陆系统(ILS) 第1部分:下滑信标性能要求和测试方法(中英文版)
Instrument landing system (ILS) - Part 1: Performance requirements and test methods of glide path beacon
  GB/T 20392-2006
HVI棉纤维物理性能试验方法(中英文版)
Test method of properties of cotton fibers by High Volume Instruments
  GB/T 16896.1-2005
高电压冲击测量仪器和软件 第一部分:对仪器的要求(中英文版)
Instruments and software used for measurements in high-voltage impulse tests Part 1:requirements for instruments
  GB/T 9359-2001
水文仪器基本环境试验条件及方法(中英文版)
Basic conditions and methods of environmental test for hydrologic instruments
  GB/T 8424.2-2001
纺织品 色牢度试验 相对白度的仪器评定方法(中英文版)
Textiles--Tests for colour fastness--Instrumental assessment of relative whiteness
  GB/T 16990-1997
纺织品 色牢度试验 颜色1/1标准深度的仪器测定(中英文版)
Textiles--Tests for colour fastness--Instrumental determination of 1/1 standard depth of colour
  GB/T 15479-1995
工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法(中英文版)
Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
  GB/T 15309-1994
船舶货舱温湿度仪技术要求及试验方法(中英文版)
Technical requirements and testing methods for temperature and humidity instruments for cargo hold of vessel

找到:61條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1