中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB/T 25774.1-2023 焊接材料的检验 第1部分： 钢、镍及镍合金熔敷金属力学性能试样的制备（中英文版） Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals |
 |
|
|
|
GB/T 25774.2-2023 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备（中英文版） Inspection of welding materials Part 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel |
|
|
|
|
GB/T 17850.9-2021 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite |
|
|
|
|
GB/T 2975-2018 钢及钢产品 力学性能试验取样位置及试样制备（中英文版） Steel and steel products—Location and preparation of samples and test pieces for mechanical testing |
|
|
|
|
GB/T 17850.5-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag |
|
|
|
|
GB/T 17850.7-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide |
|
|
|
|
GB/T 18838.2-2017 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit |
|
|
|
|
GB/T 17850.1-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification |
|
|
|
|
GB/T 17850.4-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分：煤炉渣（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag |
|
|
|
|
GB/T 25774.2-2016 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验（中英文版） Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel |
|
|
|
|
GB/T 18838.5-2015 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot |
|
|
|
|
GB/T 30790.4-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第4部分：表面类型和表面处理（中英文版） Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 4: Types of surface and surface preparation |
|
|
|
|
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|
|
|
|
GB/T 8923.4-2013 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级（中英文版） Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting |
|
|
|
|
GB/T 13288.2-2011 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
|
|
|
|
GB/T 17850.11-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分：钢渣特种型砂（中英文版） Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag |
|
|
|
|
GB/T 17850.6-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣（中英文版） Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag |
|
|
|
|
GB/T 8923.1-2011 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分：未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级（中英文版） Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou |
|
|
|
|
GB/T 18570.6-2011 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法（中英文版） Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method |
|
|
|
|
GB/T 26935-2011 集装箱钢材表面处理和涂料施工规范（中英文版） Preparation of steel substrates and paints application for freight containers |
|
|
|
|
GB/T 25774.1-2010 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验（中英文版） Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys |
|
|
|
|
GB/T 25151.4-2010 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取（中英文版） Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
|
|
|
|
GB/T 8923.3-2009 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第3部分：焊缝、边缘和其他区域的表面缺陷的处理等级（中英文版） Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds,edges and other areas with surface imperfections |
|
|
|
|
GB/T 18570.2-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分：清理过的表面上氯化物的实验室测定（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
|
|
|
|
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|
|
|
|
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|
|
|
|
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义（中英文版） Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|
|
|
|
GB/T 8923.2-2008 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第2部分: 已涂覆过的钢材表面局部清除原有涂层后的处理等级（中英文版） Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness - Part 2: Preparation grades of praviously coated steel substrates after localized removal of previous coatings |
|
|
|
|
GB/T 18838.3-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit |
|
|
|
|
GB/T 18838.4-2008 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸（中英文版） Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot |
|
|
|
|
GB/T 20066-2006 钢和铁 化学成分测定用试样的取样和制样方法（中英文版） Steel and iron -- Sampling and preparation of samples for the determination of chemical composition |
|
|
|
|
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|
|
|
|
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|
|
|
|
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|
|
|
|
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|
|
|
|
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|
|
|
|
GB/T 18570.8-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture |
|
|
|
|
GB/T 18570.5-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) |
|
|
|
|
GB/T 18570.3-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法)（中英文版） Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) |
|
|
|
|
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
|
|
|
|
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|
|
|
|
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|
|
|
|
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|
|
|
|
GB/T 17850.1-2002 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introductionand classification |
|
|
|
|
GB/T 18839.3-2002 涂覆涂料前钢材表面处理 表面处理方法 手工和动力工具清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning |
|
|
|
|
GB/T 18839.2-2002 涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning |
|
|
|
|
GB/T 18839.1-2002 涂覆涂料前钢材表面处理 表面处理方法 总则（中英文版） Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles |
|
|
|
|
GB/T 18838.1-2002 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification |
|
|
|
|
GB/T 18570.4-2001 涂覆涂料前钢材表面处理 表面清洁度的评定试验 涂覆涂料前凝露可能性的评定导则（中英文版） Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application |
|
|
|
|
GB/T 17850.3-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 铜精炼渣（中英文版） Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag |
|
|
|
|
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法（中英文版） Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
|
|
|
|
GB/T 2975-1998 钢及钢产品 力学性能试验取样位置及试样制备（中英文版） Steel and steel products--Location and preparation of test pieces for mechanical testing |
|
| 找到:54條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |
