中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43016-2023 人造革合成革试验方法 表面褶皱的测定和评价(中英文版) Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles |
|||
GB/T 28896-2023 金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版) Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints |
|||
GB/T 29043-2023 建筑幕墙保温性能检测方法(中英文版) Methods for testing the thermal insulation performance of building curtain walls |
|||
GB/T 33393-2023 鞋类 整鞋试验方法 热阻和湿阻的测定(中英文版) Footwear - Test methods for complete shoes - Determination of thermal and moisture resistance |
|||
GB/T 1927.11-2022 无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain |
|||
GB/T 1927.16-2022 无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain |
|||
GB/T 2423.24-2022 环境试验 第2部分:试验方法 试验S:模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则(中英文版) Environmental testing - Part 2: Test methods - Test S: Simulation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests |
|||
GB/T 13477.21-2022 建筑密封材料试验方法 第21部分:人工加速气候老化后颜色变化的测定(中英文版) Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering |
|||
GB/T 1927.14-2022 无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain |
|||
GB/T 3298-2022 日用陶瓷器抗热震性测定方法(中英文版) Test method for thermal shock resistance of ceramic ware for daily use |
|||
GB/T 13477.23-2022 建筑密封材料试验方法 第23部分:人工加速气候老化下拉伸-压缩循环后耐久性的测定(中英文版) Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering |
|||
GB/T 41793-2022 人造革合成革试验方法 潜在酚黄变的测定(中英文版) Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing |
|||
GB/T 3658-2022 软磁金属材料和粉末冶金材料20Hz~100kHz频率范围磁性能的环形试样测量方法(中英文版) Ring test method for magnetic properties of soft magnetic metal materials and powder metallurgy materials in the frequency range of 20Hz to 100kHz |
|||
GB/T 41753-2022 密封胶人工气候老化下拉压循环耐久性试验方法(中英文版) Test method for artificial weathering pull-down compression cycle durability of sealants |
|||
GB/T 40512-2021 汽车整车大气暴露试验方法(中英文版) Test method of exposure to weathering for motor vehicle |
|||
GB/T 20081.3-2021 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法(中英文版) Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
|||
GB/T 40286-2021 低温双循环余热回收利用装置性能测试方法(中英文版) The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization |
|||
GB/T 40200-2021 工业有机废气净化装置性能测定方法(中英文版) Method of testing the performance of equipment for industrial organic waste gas purification |
|||
GB/T 40128-2021 表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法(中英文版) Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets |
|||
GB/T 8361-2021 冷拉圆钢表面超声检测方法(中英文版) Ultrasonic testing method for the surface of cold drawn round steel |
|||
GB/T 4214.8-2021 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these |
|||
GB/T 1927.3-2021 无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood |
|||
GB/T 40858-2021 太阳能光热发电站集热管通用要求与测试方法(中英文版) General requirements and test methods for receivers of solar thermal power plants |
|||
GB/T 39145-2020 硅片表面金属元素含量的测定 电感耦合等离子体质谱法(中英文版) Test method for the content of surface metal elements on silicon wafers—Inductively coupled plasma mass spectrometry |
|||
GB/T 38930-2020 民用轻小型无人机系统抗风性要求及试验方法(中英文版) Requirements and test methods of the capability of wind resistance for civil small and light unmanned aircraft system |
|||
GB/T 38910-2020 卫生陶瓷 标志试验方法(中英文版) Sanitary wares—Test method of the marking |
|||
GB/T 24522-2020 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法(中英文版) Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
|||
GB/T 38712-2020 超薄玻璃导热系数试验方法 热流法(中英文版) Test method for thermal conductivity of ultrathin glass—Heat flow method |
|||
GB/T 5137.3-2020 汽车安全玻璃试验方法 第3部分:耐辐照、高温、潮湿、燃烧和耐模拟气候试验(中英文版) Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests |
|||
GB/T 38611-2020 办公家具 办公工作椅 稳定性、强度和耐久性测试方法(中英文版) Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability |
|||
GB/T 39684-2020 外窗热工缺陷现场测试方法(中英文版) Testing method of thermal irregularities for external window opening |
|||
GB/T 39524-2020 建筑门窗耐候性能试验方法(中英文版) Test method of weatherability for building windows and doors |
|||
GB/T 39605-2020 服装湿阻测试方法 出汗暖体假人法(中英文版) Test method for measuring the evaporative resistance of clothing—Sweating manikin method |
|||
GB/T 39525-2020 玻璃幕墙面板牢固度检测方法(中英文版) Test method for the fastening degree of glass curtain wall panel |
|||
GB/T 39382-2020 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法(中英文版) Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints |
|||
GB/T 37890-2019 橡胶或塑料涂覆织物 芯吸性能测试方法(中英文版) Rubber-or plastics-coated fabrics—Test method for wicking of the cloth |
|||
GB/T 37825-2019 建筑玻璃均布静载模拟风压试验方法(中英文版) Test method for simulating wind pressure resistance of building glass under the uniform static loads |
|||
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法(切口试验)(中英文版) Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) |
|||
GB/T 10066.6-2018 电热和电磁处理装置的试验方法-第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheating and electromagnetic processing installations—Part 6:Test methods for the determination of power output of industrial microwave heating installations |
|||
GB/T 36585-2018 外墙外保温系统动态风压试验方法(中英文版) Method of dynamic wind uplift test for external thermal insulation composite systems |
|||
GB/T 34824-2017 建筑纱门窗抗风性能检测方法(中英文版) The test method of wind load resistance performance for screens of windows and doors |
|||
GB/T 34407-2017 塑料管道壁厚超声波检测方法(中英文版) Test method for the wall thickness of plastic pipes by ultrasonic |
|||
GB/T 3250-2017 铝及铝合金铆钉用线材和棒材剪切与铆接试验方法(中英文版) Shearing and riveting test method of wires and rods for the aluminum and aluminum-alloy rivets |
|||
GB/T 33778-2017 视频监控系统无线传输设备射频技术指标与测试方法(中英文版) RF technical requirements and testing methods for the wireless transceiver of video monitoring system |
|||
GB/T 33569-2017 户外用木材涂饰表面人工老化试验方法(中英文版) Test method of artificial weathering for coatings on exterior wood |
|||
GB/T 33488.4-2017 化工用塑料焊接制承压设备检验方法 第4部分:超声检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination |
|||
GB/T 33488.1-2017 化工用塑料焊接制承压设备检验方法 第1部分:总则(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements |
|||
GB/T 33488.3-2017 化工用塑料焊接制承压设备检验方法 第3部分:射线检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination |
|||
GB/T 33488.2-2017 化工用塑料焊接制承压设备检验方法 第2部分:外观检测(中英文版) Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination |
|||
GB/T 35239-2017 人造板及其制品用甲醛清除剂清除能力的测试方法(中英文版) Test method of evaluating the clearance capacity of formaldehyde scavenger for wood-based panels and finishing products |
|||
GB/T 35169-2017 建筑外墙外保温系统耐候性试验方法(中英文版) Test method of weatherability for external thermal insulation composite systems of building |
|||
GB/T 35243-2017 人造板及其制品游离甲醛吸附材料吸附性能的测试方法(中英文版) Test method of evaluating the absorption property of formaldehyde absorption material for wood-based panels and finishing products |
|||
GB/T 35259-2017 纺织品 色牢度试验 试样颜色随照明体变化的仪器评定方法(CMCCON02)(中英文版) Textiles—Tests for colour fastness—Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant(CMCCON02) |
|||
GB/T 33393-2016 鞋类 整鞋试验方法 稳态条件下热阻和湿阻的测定(中英文版) Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions |
|||
GB/T 33365-2016 钢筋混凝土用钢筋焊接网 试验方法(中英文版) Weld steel fabric for the reinforcement of concrete—Test methods |
|||
GB/T 32991-2016 矿物棉绝热材料密度均匀性试验方法(中英文版) Test method for density uniformity of mineral wool for thermal insulation |
|||
GB/T 32981-2016 墙体材料当量导热系数测定方法(中英文版) Test method for effective thermal conductivity of wall materials |
|||
GB/T 2972-2016 镀锌钢丝锌层硫酸铜试验方法(中英文版) Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip |
|||
GB/T 32346.1-2015 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分:试验方法和要求(中英文版) Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 32217-2015 液压传动 密封装置 评定液压往复运动密封件性能的试验方法(中英文版) Hydraulic fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
|||
GB/T 18890.1-2015 额定电压220kV(Um=252 kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements |
|||
GB/T 32088-2015 汽车非金属部件及材料氙灯加速老化试验方法(中英文版) Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus |
|||
GB/T 10297-2015 非金属固体材料导热系数的测定 热线法(中英文版) Test method for thermal conductivity of nonmetal solid materials—hot-wire method |
|||
GB/T 31881-2015 汽车非金属部件及材料紫外加速老化试验方法(中英文版) Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus |
|||
GB/T 15256-2014 硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法)(中英文版) Rubber, vulcanized or thermoplastic―Determination of low-temperature brittleness(multiple test piece method) |
|||
GB/T 31294-2014 风电叶片用芯材 夹芯板面层剥离强度的测定(中英文版) The core to wind turbine blade―Test method for facing cleavage of sandwich panels |
|||
GB/T 31128-2014 毛巾产品毛圈钩拉力测试方法(中英文版) Test methods for the resistance to pile loop extraction of towel product |
|||
GB/T 11017.1-2014 额定电压110kV(Um=126kV)交联聚乙烯绝缘电力电缆及其附件 第1部分:试验方法和要求(中英文版) Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV(Um=126 kV)―Part 1: Test methods and requirements |
|||
GB/T 30792-2014 罐内水性涂料抗微生物侵染的试验方法(中英文版) Test method for resistance of water-borne coatings in the container to attack by microorganisms |
|||
GB/T 30798-2014 食品用洗涤剂试验方法 荧光增白剂的测定(中英文版) The test method for safety of food detergents―Limit test for fluorescent whitening agent |
|||
GB/T 10870-2014 蒸气压缩循环冷水(热泵)机组性能试验方法(中英文版) The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle |
|||
GB/T 17657-2013 人造板及饰面人造板理化性能试验方法(中英文版) Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels |
|||
GB/T 29043-2012 建筑幕墙保温性能分级及检测方法(中英文版) Graduation and test method for thermal insulating properties of curtain walls |
|||
GB/T 7196-2012 用液体萃取测定电气绝缘材料离子杂质的试验方法(中英文版) Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
|||
GB/T 29365-2012 塑木复合材料 人工气候老化试验方法(中英文版) Wood-Plastic Composite (WPC) - Test methods of artificial weathering |
|||
GB/T 28896-2012 金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版) Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds |
|||
GB/T 28860-2012 环氧粉末包封料胶化时间测定方法(中英文版) Test method for the determination of get time of encapsulating material of powdered epoxy |
|||
GB/T 25749.6-2012 机械安全 空气传播的有害物质排放的评估 第6部分:测量带导管出口的空气净化系统质量分离效率的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
|||
GB/T 25749.5-2012 机械安全 空气传播的有害物质排放的评估 第5部分:测量不带导管出口的空气净化系统质量分离效率的试验台法(中英文版) Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
|||
GB/T 27945.2-2011 热处理盐浴有害固体废物的管理 第2部分:浸出液检测方法(中英文版) The management of hazardous solid wastes from heat treatment salts Part 2:Test method of extractives |
|||
GB/T 27587-2011 日用陶瓷耐微波加热测试方法(中英文版) Test method for the resistance to microwave heating of domestic ceramicware |
|||
GB/T 1346-2011 水泥标准稠度用水量、凝结时间、安定性检验方法(中英文版) Test methods for water requirement of normal consistency, setting time and soundness of the portland cement |
|||
GB/T 25962-2010 高速条件下汽车轮毂轴承润滑脂漏失量测定法(中英文版) Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions |
|||
GB/T 25967-2010 带辅助能源的家用太阳能热水系统热性能试验方法(中英文版) Test methods for thermal performance of domestic solar-plus-supplementary water heating systems |
|||
GB/T 25275-2010 液晶显示器(LCD)用偏振片 光学性能和耐候性能测试方法(中英文版) Polarizing film for Liquid Crystal Display (LCD) - Method of test for the properties of photics and weather resistance |
|||
GB/T 13387-2009 硅及其它电子材料晶片参考面长度测量方法(中英文版) Test method for measuring flat length wafers of silicon and other electronic materials |
|||
GB/T 24522-2009 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法(中英文版) Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
|||
GB/T 24504-2009 煤层气井注入/压降试井方法(中英文版) The method of injection/falloff well test for coalbed methane well |
|||
GB/T 24210-2009 整体石墨电极弹性模量试验 声速法(中英文版) Test method for the elastis modulus of whole graphite electrodes - Velocity of sound |
|||
GB/T 24277-2009 评估部分型式试验成套设备(PTTA)短路耐受强度的一种方法(中英文版) A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) |
|||
GB/T 12705.2-2009 纺织品 织物防钻绒性试验方法 第2部分:转箱法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 2: Tumble test |
|||
GB/T 12705.1-2009 纺织品 织物防钻绒性试验方法 第1部分:摩擦法(中英文版) Textile - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test |
|||
GB/T 13465.7-2009 不透性石墨增重率和填孔率试验方法(中英文版) Test method of the rates of body weight gain and porefilling of impermeable graphite |
|||
GB/T 23595.4-2009 白光LED灯用稀土黄色荧光粉试验方法 第4部分:热稳定性的测定(中英文版) Test methods of rare earth yellow phosphor for white LED lamps - Part 4: Determination of thermostability |
|||
GB/T 23296.1-2009 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南(中英文版) Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th |
|||
GB/T 4074.8-2009 绕组线试验方法 第8部分:测定漆包绕组线温度指数的试验方法 快速法(中英文版) Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method |
|||
GB/T 4074.7-2009 绕组线试验方法 第7部分:测定漆包绕组线温度指数的试验方法(中英文版) Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires |
|||
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
|||
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|||
GB/T 21956.4-2009 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS |
|||
GB/T 22689-2008 测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法(中英文版) Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
|||
GB 23177-2008 举重杠铃的安全、性能要求和试验方法(中英文版) The safety and capability requirements and testing methods for barbell of weightlifting |
|||
GB/T 15838-2008 数字网中交换设备时钟性能测试方法(中英文版) Test methods for the performances of switching equipment clocks in digital network |
|||
GB/T 10066.6-2008 电热装置的试验方法 第6部分:工业微波加热装置输出功率的测定方法(中英文版) Test methods for electroheat installations - Part 6: Industrial microwave heating installations- test methods for the determination of power output |
|||
GB/T 10066.9-2008 电热装置的试验方法 第9部分:高频介质加热装置输出功率的测定(中英文版) Test methods for electroheat installtions - Part 9: The determination of power output for High-frequency dielectric heating installation |
|||
GB/T 3298-2008 日用陶瓷器抗热震性测定方法(中英文版) Standard test method for crazing resistance of domestic ceramic ware by a thermal shock method |
|||
GB/T 6375-2008 土方机械 牵引力测试方法(中英文版) Earth-moving machinery - Method of test for the measurement of drawbar pull |
|||
GB/T 14271-2008 毛绒净毛率试验方法 油压法(中英文版) Test method for the determination of scoured yield raw wool - Oil pressure method |
|||
GB/T 1036-2008 塑料 -30℃~30℃线膨胀系数的测定 石英膨胀计法(中英文版) Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer |
|||
GB/T 6384-2008 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法(中英文版) The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures |
|||
GB/T 16304-2008 压电陶瓷材料性能测试方法 电场应变特性的测试(中英文版) Test methods of the properties for piezoelectric ceramics - Test for relation between electric field and strain |
|||
GB/T 8484-2008 建筑外门窗保温性能分级及检测方法(中英文版) Graduation and test method for thermal insulating properties of doors and windows |
|||
GB/T 18856.6-2008 水煤浆试验方法 第6部分:密度测定(中英文版) Test methods for coal water mixture - Part 6: Determination of the density |
|||
GB/T 18856.5-2008 水煤浆试验方法 第5部分:稳定性测定(中英文版) Test methods for coal water mixture - Part 5: Determination of the stability |
|||
GB/T 7121.2-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法(中英文版) The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method |
|||
GB/T 8117.2-2008 汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验(中英文版) Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines |
|||
GB/T 2951.13-2008 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test |
|||
GB/T 2951.41-2008 电缆和光缆绝缘和护套材料通用试验方法 第41部分:聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl |
|||
GB/T 7121.1-2008 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法(中英文版) The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS |
|||
GB/T 21957-2008 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法(中英文版) The fatigue-life testing method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor |
|||
GB/T 21956.3-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS |
|||
GB/T 21956.2-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS |
|||
GB/T 21956.1-2008 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法(中英文版) The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS |
|||
GB/T 21767-2008 化学品 体内哺乳动物肝细胞非程序性DNA合成(UDS)试验方法(中英文版) Chemical - Test method of unscheduled DNA synthesis (UDS) test with mammalian liver cells In Vivo |
|||
GB/T 21771-2008 化学品 重复剂量毒性合并生殖/发育毒性筛选试验方法(中英文版) Chemicals - Test method of combined repeated dose toxicity study with the reproduction/developmental toxicity screening |
|||
GB/T 21768-2008 化学品 体外哺乳动物细胞DNA损伤与修复/非程序性DNA合成试验方法(中英文版) Chemical - Test method of DNA damage and repair/unscheduled DNA synthesis with mammalian cells in vitro |
|||
GB/T 15248-2008 金属材料轴向等幅低循环疲劳试验方法(中英文版) The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials |
|||
GB/T 18570.12-2008 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions |
|||
GB/T 19198-2008 贵金属及其合金对铂、对铜热电动势的测量方法(中英文版) Testing method for thermo-electromotive force of precious metals and their alloys pair up with platinum or copper |
|||
GB/T 11143-2008 加抑制剂矿物油在水存在下防锈性能试验法(中英文版) Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water |
|||
GB/T 21405-2008 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求(中英文版) Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
|||
GB/T 14786-2008 农林拖拉机和机械 驱动车轮扭转疲劳试验方法(中英文版) Tractors and machinery for agriculture and forestry - Test methods of the driving wheels torsion fatigue |
|||
GB/T 6976-2007 羊毛毛丛自然长度试验方法(中英文版) Test method for measure length of the wool staple natural formation |
|||
GB/T 21224-2007 评定绝缘材料水树枝化的试验方法(中英文版) Methods of test for the evaluation of water treeing in insulating materials |
|||
GB/T 10066.31-2007 电热装置的试验方法 第31部分:高频感应加热装置发生器输出功率的测定(中英文版) Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator |
|||
GB/T 6978-2007 含脂毛洗净率试验方法 烘箱法(中英文版) Test method for the determination of scoured yield of greasy wool - Drying oven method |
|||
GB/T 21030-2007 羊毛及其他动物纤维平均直径与分布试验方法 纤维直径光学分析仪法(中英文版) Test method for the mean and distribution of fibre diameter of wool and other animal fibre - an Optical Fibre Diameter Analyser (OFDA) |
|||
GB/T 12206-2006 城镇燃气热值和相对密度测定方法(中英文版) Testing method to determine the calorific values of town gas |
|||
GB/T 20493.2-2006 电子成像 办公文件黑白扫描用测试标板 第2部分:使用方法(中英文版) Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use |
|||
GB/T 6501-2006 羊毛纤维长度试验方法 梳片法(中英文版) Test method for measure length of the wool fibre - Comb sorter method |
|||
GB/T 19993-2005 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法(中英文版) Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling |
|||
GB/T 18570.9-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts |
|||
GB/T 18570.10-2005 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法(中英文版) Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride |
|||
GB/T 6147-2005 精密电阻合金热电动势率 测试方法(中英文版) Test method for thermoelectric power of precision resistance alloys |
|||
GB/T 19599.1-2004 合成纤维渔网片试验方法 网片重量(中英文版) Testing method for fishing nets of synthetic fibre--Weight of netting |
|||
GB/T 5822.2-2004 铁路内燃机车柴油机油 石油醚不溶物测定方法(中英文版) Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine |
|||
GB/T 19243-2003 硫化橡胶或热塑性橡胶与有机物接触污染的试验方法(中英文版) Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material |
|||
GB/T 19137-2003 农药低温稳定性测定方法(中英文版) Testing method for the storage stability at lowtemperature of pesticides |
|||
GB/T 7305-2003 石油和合成液水分离性测定法(中英文版) Standard test method for water separabilityof petroleum oils and synthetic fluids |
|||
GB/T 7260.3-2003 不间断电源设备(UPS) 第3部分: 确定性能的方法和试验要求(中英文版) Uninterruptiblepower systems(UPS)--Part 3:Method of specifying the performance and test requirements |
找到:168條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |