中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43007-2023 床垫硬度等级分布测试与评价方法(中英文版) Mattress hardness grade distribution testing and evaluation method |
|||
GB/T 2423.56-2023 环境试验 第2部分:试验方法 试验Fh:宽带随机振动和导则(中英文版) Environmental testing Part 2: Test methods Test Fh: Broadband random vibration and guidelines |
|||
GB/T 42872-2023 无损检测 在役汽轮机叶片超声检测和评价方法(中英文版) Non-destructive testing Ultrasonic testing and evaluation methods for in-service steam turbine blades |
|||
GB/T 42592-2023 风力发电机组 风轮叶片超声波检测方法(中英文版) Wind turbines - Ultrasonic testing method for wind rotor blades |
|||
GB/T 43615-2023 增材制造 定向能量沉积金属成形件超声检测方法(中英文版) Additive manufacturing Ultrasonic testing method of directed energy deposition metal forming parts |
|||
GB/T 4893.4-2023 家具表面漆膜理化性能试验 第4部分:附着力交叉切割测定法(中英文版) Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method |
|||
GB/T 2423.24-2022 环境试验 第2部分:试验方法 试验S:模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则(中英文版) Environmental testing - Part 2: Test methods - Test S: Simulation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests |
|||
GB/T 12639-2021 地球同步轨道通信卫星有效载荷在轨测试方法(中英文版) Methods of in-orbit testing for GEO communication satellite payload performance |
|||
GB/T 5095.2503-2021 电子设备用机电元件 基本试验规程及测量方法 第25-3部分:试验25c:上升时间衰减(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation |
|||
GB/T 41123.2-2021 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释(中英文版) Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation |
|||
GB/T 41123.1-2021 无损检测 工业射线计算机层析成像检测 第1部分:原理、设备和样品(中英文版) Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples |
|||
GB/T 12604.12-2021 无损检测? 术语? 第12部分:工业射线计算机层析成像检测(中英文版) Non-destructive testing -- Terminology -- Part 12: Radiation methods for industrial computed tomography |
|||
GB/T 41123.3-2021 无损检测 工业射线计算机层析成像检测 第3部分:验证(中英文版) Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification |
|||
GB/T 5169.20-2021 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 11809-2021 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验(中英文版) Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing |
|||
GB/T 38787-2020 塑料 材料生物分解试验用样品制备方法(中英文版) Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials |
|||
GB/T 39427-2020 无损检测 工业Ir192伽玛射线源尺寸测定方法(中英文版) Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source |
|||
GB/T 39265-2020 道路车辆 盲区监测(BSD)系统性能要求及试验方法(中英文版) Road vehicles—Performance requirements and testing methods for blind spot detection (BSD) system |
|||
GB/T 37656-2019 海上导航和无线电通信设备及系统 D级数字选择性呼叫(DSC)甚高频(VHF)无线电话 测试方法及要求的测试结果(中英文版) Maritime navigation and radiocommunication equipment and systems—VHF radiotelephone equipment incorporating Class“D”Digital Selective Calling(DSC)—Methods of testing and required test results |
|||
GB/T 37417-2019 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果(中英文版) Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements,methods of testing and required test results |
|||
GB/T 37288-2019 边境(界)地区无线电电磁环境测试要求和测试方法(中英文版) Testing requirement and methods for radio electromagnetic environment in border areas |
|||
GB/T 2423.56-2018 环境试验-第2部分:试验方法-试验Fh:宽带随机振动和导则(中英文版) Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance |
|||
GB/T 36279-2018 架空导线自阻尼特性测试方法(中英文版) Methods for testing self-damping characteristics of overhead conductors |
|||
GB/T 36060-2018 精装书籍用水基胶黏剂粘接过程控制要求及检验方法(中英文版) Process control and testing methods on the water-based adhesives using in hardcover book binding production |
|||
GB/T 34641-2017 无损检测 直接热中子照相检测的像质测定方法(中英文版) Non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination |
|||
GB/T 5170.9-2017 环境试验设备检验方法 第9部分:太阳辐射试验设备(中英文版) Inspection methods for environmental testing equipments—Part 9:Solar radiation testing equipments |
|||
GB/T 2423.3-2016 环境试验 第2部分:试验方法 试验Cab:恒定湿热试验(中英文版) Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state |
|||
GB/T 7734-2015 复合钢板超声检测方法(中英文版) Method for ultrasonic testing of clad steel plates |
|||
GB/T 32268-2015 十八烷基键合相(C18)高效液相色谱柱性能测定方法(中英文版) Method of performance testing for octadecyl bonded(C18) high performance liquid chromatography(HPLC) column |
|||
GB/T 30707-2014 精细陶瓷涂层结合力试验方法 划痕法(中英文版) Testing method on adhesion of fine ceramic coatings―Scratching |
|||
GB/T 5169.20-2013 电工电子产品着火危险试验 第20部分:火焰表面蔓延 试验方法概要和相关性(中英文版) Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods |
|||
GB/T 2423.40-2013 环境试验 第2部分:试验方法 试验Cx:未饱和高压蒸汽恒定湿热(中英文版) Environmental testing―Part 2: Test methods―Test Cx: Damp heat, steady state (unsaturated pressurized vapour) |
|||
GB/T 2423.24-2013 环境试验 第2部分:试验方法 试验Sa:模拟地面上的太阳辐射及其试验导则(中英文版) Environmental testing - Part 2: Test methods - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
|||
GB/T 6839-2013 缝纫线润滑性试验方法(中英文版) Testing method for lubrication of sewing threads |
|||
GB/T 2423.34-2012 环境试验 第2部分:试验方法 试验Z/AD:温度/湿度组合循环试验(中英文版) Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test |
|||
GB/T 8077-2012 混凝土外加剂匀质性试验方法(中英文版) Methods for testing uniformity of concrete admixture |
|||
GB/T 2423.50-2012 环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验(中英文版) Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components |
|||
GB/T 27934.4-2011 纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive |
|||
GB/T 27934.3-2011 纸质印刷品覆膜过程控制及检测方法 第3部分:水基胶黏剂即涂干式覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive |
|||
GB/T 27934.2-2011 纸质印刷品覆膜过程控制及检测方法 第2部分:乙烯-醋酸乙烯共聚物(EVA)热熔胶预涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive |
|||
GB/T 9384-2011 广播收音机、广播电视接收机、磁带录音机、声频功率放大器(扩音机)的环境试验要求和试验方法(中英文版) Environmental testing requirements and methods for broadcasting receivers,broadcasting television receivers,tape recorders and audio amplifiers |
|||
GB/T 26642-2011 无损检测 金属材料计算机射线照相检测方法(中英文版) Non-destructive testing - Test method for computed radiography of metallic materials |
|||
GB/T 17491-2011 液压泵、马达和整体传动装置 稳态性能的试验及表达方法(中英文版) Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance |
|||
GB/T 14057.2-2011 放射性污染表面去污 第2部分:纺织品去污剂的试验方法(中英文版) Decontamination of radioactively contaminated surface - Part 2:Testing method of decontamination agents for textiles |
|||
GB/T 25758.3-2010 无损检测 工业X射线系统焦点特性 第3部分:狭缝照相机射线照相方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method |
|||
GB/T 25758.2-2010 无损检测 工业X射线系统焦点特性 第2部分:针孔照相机射线照相方法(中英文版) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method |
|||
GB/T 14144-2009 硅晶体中间隙氧含量径向变化测量方法(中英文版) Testing method for determination of radial interstitial oxygen variation in silicon |
|||
GB/T 14057.1-2008 放射性污染表面去污 第1部分:试验与评价去污难易程度的方法(中英文版) Decontamination of radioactively contaminated surfaces - Part 1: Method for testing and assessing the ease of decontamination |
|||
GB/T 11809-2008 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验(中英文版) Test method of weld of fuel rod for PWR - Metallographic examination and radiographic testing |
|||
GB/T 12954.1-2008 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法(中英文版) Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives |
|||
GB/T 6504-2008 化学纤维 含油率试验方法(中英文版) Testing method for oil content of man-made fibres |
|||
GB/T 5170.9-2008 电工电子产品环境试验设备检验方法 太阳辐射试验设备(中英文版) Inspection methods for environmental testing equipments for electric and electronic products - Solar radiation testing equipments |
|||
GB/T 12605-2008 无损检测 金属管道熔化焊环向对接接头射线照相检测方法(中英文版) Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
|||
GB/T 21646-2008 400MHz频段模拟公众无线对讲机技术规范和测量方法(中英文版) Technical specification and testing methods for analog public radio interphone on 400MHz band |
|||
GB/T 2423.15-2008 电工电子产品环境试验 第2部分: 试验方法 试验Ga和导则: 稳态加速度(中英文版) Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady |
|||
GB/T 21089.1-2007 建筑涂料水性助剂应用性能试验方法 第1部分:分散剂、消泡剂和增稠剂(中英文版) Testing method of application performance of waterborne additives for architectural coatings - part 1: Dispersing agent,Defoaming agent, Thickening agent |
|||
GB/T 2423.3-2006 电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验(中英文版) Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, Steady state |
|||
GB/T 2423.56-2006 电工电子产品环境试验 第2部分:试验方法 试验Fh:宽带随机振动(数字控制)和导则(中英文版) Environmental testing for electric and electronic products - Part 2: Test methods - Test Fh: Vibration、broad-band random(digital control) and guidance |
|||
GB/T 5270-2005 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述(中英文版) Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion |
|||
GB/T 7734-2004 复合钢板超声波检验方法(中英文版) Method for ultrasonic testing of clad steel plates |
|||
GB/T 12199-2000 非广播盒式磁带录像机环境要求和试验方法(中英文版) Environmental testing requirements and methods for non-broadcast video tape recorders |
|||
GB/T 17619-1998 机动车电子电器组件的电磁辐射抗扰性限值和测量方法(中英文版) Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation |
|||
GB/T 5095.5-1997 电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验(中英文版) Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components),static load tests(fixed components),endurance tests and overload tests |
|||
GB/T 15868-1995 全球海上遇险与安全系统(CMDSS) 船用无线电设备和海上导航设备通用要求测试方法和要求的测试结果(中英文版) Shipborne radio equipment forming part of the (globalmaritime distress and safety system) and marine navigational equipment--General require-ments,methods of testing and required test results |
|||
GB/T 15524-1995 非广播磁带录像机可靠性要求和试验方法(中英文版) Reliability requirements and testing methods for non-broadcast video tape recorders |
|||
GB/T 14903-1994 无机胶粘剂套接扭转剪切强度试验方法(中英文版) Testing method for torsional shear strength of doedl joint by inorganic adhesives |
|||
GB/T 12639-1990 通信卫星有效载荷性能的在轨测试方法(中英文版) Methods of in-orbit testing for communication satellite payload performances |
|||
GB/T 9391-1988 船用雷达技术要求和使用要求 测试方法和要求的测试结果(中英文版) Shipborne radar,technical and operation requirements--Method of testing and required test results |
|||
GB/T 9382-1988 彩色电视广播接收机可靠性验证试验 贝叶斯方法(中英文版) Bayes method of reliability demonstration testing for colour broadcasting TV receiver |
找到:69條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |