中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/Z 40602.4-2023 天线及接收系统的无线电干扰 第4部分:无线接收系统 集成无线模块电子设备电磁兼容测试方法(中英文版) Radio interference from antennas and receiving systems Part 4: Wireless receiving systems Electromagnetic compatibility test methods for electronic equipment with integrated wireless modules |
|||
GB/T 43200-2023 机器人一体化关节性能及试验方法(中英文版) Robot integrated joint performance and test methods |
|||
GB/T 42848-2023 半导体集成电路 直接数字频率合成器测试方法(中英文版) Semiconductor integrated circuits - Test methods for direct digital frequency synthesizers |
|||
GB/Z 43468.1-2023 残障人辅助技术系统和辅助器具 轮椅车系固和乘坐者约束系统 第1部分:一般要求和试验方法(中英文版) Assistive technology systems and assistive devices for persons with disabilities - Wheelchair fastening and occupant restraint systems - Part 1: General requirements and test methods |
|||
GB/Z 43510-2023 集成电路TSV三维封装可靠性试验方法指南(中英文版) Guide to Reliability Test Methods for Integrated Circuit TSV Three-Dimensional Packages |
|||
GB/T 43405-2023 封闭式货车 货物隔离装置及系固点技术要求和试验方法(中英文版) Enclosed trucks - technical requirements and test methods for cargo isolation devices and securing points |
|||
GB/T 41630-2022 智能泊车辅助系统性能要求及试验方法(中英文版) Performance requirements and test methods of intelligent parking assistance system |
|||
GB/T 41813.1-2022 信息技术 智能语音交互测试方法 第1部分:语音识别(中英文版) Information technology—Test methods for intelligent voice interaction—Part 1: Speech recognition |
|||
GB/T 42063-2022 锐器伤害保护 要求与试验方法 一次性使用皮下注射针、介入导管导引针和血样采集针的锐器伤害保护装置(中英文版) Sharps injury protection requirements and test methods - Sharps injury protection devices for disposable hypodermic needles, interventional catheter guide needles and blood sample collection needles |
|||
GB/T 3903.29-2022 鞋类 外底试验方法 剖层撕裂强度和层间剥离强度(中英文版) Footwear - Test methods for outsoles - Split tear strength and interlaminar peel strength |
|||
GB/T 41813.2-2022 信息技术 智能语音交互测试方法 第2部分:语义理解(中英文版) Information technology—Test methods for intelligent voice interaction—Part 2: Semantic understanding |
|||
GB/T 41798-2022 智能网联汽车 自动驾驶功能场地试验方法及要求(中英文版) Field test methods and requirements for autonomous driving functions of intelligent networked vehicles |
|||
GB/T 26957-2022 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法(中英文版) Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints |
|||
GB/T 8243.12-2021 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
|||
GB/T 39846-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 集群核心网到调度台接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between trunking core network and dispach console |
|||
GB/T 39840-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 空中接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Air interface |
|||
GB/T 39838-2021 基于LTE技术的宽带集群通信(B-TrunC)系统 接口测试方法(第一阶段) 终端到集群核心网接口(中英文版) LTE-based broadband trunking communication (B-TrunC) system—Test methods for interface (Phase 1)—Interface between UE and trunking core network |
|||
GB/T 41123.2-2021 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释(中英文版) Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation |
|||
GB/T 18978.304-2021 人-系统交互工效学 第304部分:电子视觉显示器的用户绩效测试方法(中英文版) Ergonomics of human-system interaction—Part 304: User performance test methods for electronic visual displays |
|||
GB/T 41170.2-2021 造口辅助器具的皮肤保护用品 试验方法 第2部分:耐湿完整性和黏合强度(中英文版) Skin barrier for ostomy aids -- Test methods -- Part 2: Wet integrity and adhesive strength |
|||
GB/T 40979-2021 智能家用电器个人信息保护要求和测评方法(中英文版) Personal information protection requirements and test methods for intelligent household appliances |
|||
GB/T 40922-2021 成人特里马滑雪靴 特里马滑雪板固定器接口 要求和试验方法(中英文版) Telemark ski-boots for adults—Interface with Telemark ski-bindings—Requirements and test methods |
|||
GB/T 40930-2021 成人旅行滑雪靴 旅行滑雪板固定器接口 要求和试验方法(中英文版) Touring ski-boots for adults—Interface with touring ski-bindings—Requirements and test methods |
|||
GB/T 40856-2021 车载信息交互系统信息安全技术要求及试验方法(中英文版) Technical requirements and test methods for cybersecurity of on-board information interactive system |
|||
GB/T 5095.2509-2020 电子设备用机电元件 基本试验规程及测量方法 第25-9部分:信号完整性试验 试验25i:外来串扰(中英文版) Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests-Test 25i: Alien crosstalk |
|||
GB/T 4334-2020 金属和合金的腐蚀 奥氏体及铁素体-奥氏体(双相)不锈钢晶间腐蚀试验方法(中英文版) Corrosion of metals and alloys-Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels |
|||
GB/T 8243.14-2020 内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings |
|||
GB/T 13448-2019 彩色涂层钢板及钢带试验方法(中英文版) Test methods for prepainted steel sheet and strip |
|||
GB/T 37789-2019 钢结构十字接头试验方法(中英文版) Test methods for cruciform joints of steel structures |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 28043-2019 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparison |
|||
GB/T 26857.4-2018 信息技术 开放系统互连 测试方法和规范(MTS) 测试和测试控制记法 第3版 第4部分:TTCN-3操作语义(中英文版) Information technology—Open systems interconnection—Methods for testing and specification(MTS)—The testing and test control notation—Version 3一Part 4: TTCN-3 operational semantics |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 35005-2018 集成电路倒装焊试验方法(中英文版) Test methods for flip chip integrated circuits |
|||
GB/T 19973.2-2018 医疗器械的灭菌 微生物学方法 第2部分:用于灭菌过程的定义、确认和维护的无菌试验(中英文版) Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition,validation and maintenance of a sterilization process |
|||
GB/T 36062-2018 数字印刷系统的使用要求及检验方法(中英文版) Use requirements and test methods for digital printing system |
|||
GB/T 8243.15-2018 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings |
|||
GB/T 36479-2018 集成电路 焊柱阵列试验方法(中英文版) Integrated circuits—Test methods for column grid array |
|||
GB/T 37052-2018 光伏建筑一体化(BIPV)组件电池额定工作温度测试方法(中英文版) Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules |
|||
GB/T 37172-2018 接入网设备测试方法-EPON系统互通性(中英文版) Test methods for access network equipment—Interoperability of EPON system |
|||
GB/T 37174-2018 接入网设备测试方法-GPON系统互通性(中英文版) Test methods for access network—Interoperability of GPON system |
|||
GB/T 8243.5-2018 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability |
|||
GB/T 35102-2017 信息技术 射频识别 800/900MHz空中接口符合性测试方法(中英文版) Information technology—Radio frequency identification—Conformance test methods for air interface at 800/900MHz |
|||
GB/T 13557-2017 印制电路用挠性覆铜箔材料试验方法(中英文版) Test methods for copper-clad material for flexible printed circuits |
|||
GB/T 33905.5-2017 智能传感器 第5部分:检查和例行试验方法(中英文版) Intelligent sensor—Part 5:Methods for inspection and routine testing |
|||
GB/T 15670.4-2017 农药登记毒理学试验方法 第4部分:急性经口毒性试验 概率单位法(中英文版) Toxicological test methods for pesticides registration—Part 4:Acute oral toxicity test—Miller and Taninter’s method |
|||
GB/T 4722-2017 印制电路用刚性覆铜箔层压板试验方法(中英文版) Test methods for rigid copper clad laminates for printed circuits board |
|||
GB/T 8243.7-2017 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7:Vibration fatigue test |
|||
GB/T 8243.6-2017 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test |
|||
GB/T 33739-2017 基于13.56MHz和2.45GHz双频技术的非接触式读写器射频接口测试方法(中英文版) Test methods for radio frequency interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology |
|||
GB/T 33737-2017 手机支付 基于2.45GHz RCC(限域通信)技术的智能卡测试方法(中英文版) Mobile payment—Test methods for intellegent card based on 2.45GHz RRC(range controlled communication) technology |
|||
GB/T 33379-2016 色漆和清漆用漆基 氨基树脂 通用试验方法(中英文版) Binders for paints and varnishes—Amino resins—General methods of test |
|||
GB/T 33371.1-2016 色漆和清漆用漆基 醇酸树脂 第1部分:通用试验方法(中英文版) Binders for paints and varnishes—Alkyd resins—Part 1: General methods of test |
|||
GB/T 33312-2016 色漆和清漆用漆基 多异氰酸酯树脂 通用试验方法(中英文版) Binders for paints and varnishes—Polyisocyanate resins—General methods of test |
|||
GB/T 33259-2016 数字印刷质量要求及检验方法(中英文版) Quality requirements and test methods for digital printing |
|||
GB/T 33258-2016 热固型轮转胶印涂布纸印刷适性要求及检验方法(中英文版) Printability requirements and test methods of coated paper for heatset web offset printing |
|||
GB/T 33016-2016 多层印制板用粘结片试验方法(中英文版) Test methods for bongding sheet for multilayer printed boards |
|||
GB/T 33099-2016 浸胶骨架材料硬挺度的测定 三点弯曲法(中英文版) Test methods of stiffness for dipped reinforcing material—Three-point bending |
|||
GB/T 15260-2016 金属和合金的腐蚀 镍合金晶间腐蚀试验方法(中英文版) Corrosion of metals and alloys—Test methods for intergranular corrosion of nickel alloys |
|||
GB/T 24218.10-2016 纺织品 非织造布试验方法 第10部分:干态落絮的测定(中英文版) Textiles—Test methods for nonwovens—Part 10: Lint and other particles generation in the dry state |
|||
GB/T 32361-2015 分离膜孔径测试方法 泡点和平均流量法(中英文版) Test methods for pore size properties of membrane filters—Bubble point and mean flow pore test |
|||
GB/T 8243.13-2015 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings |
|||
GB/T 18978.307-2015 人-系统交互工效学 第307部分:电子视觉显示器的分析和符合性试验方法(中英文版) Ergonomics of human-system interaction—Part 307: Analysis and compliance test methods for electronic visual displays |
|||
GB/T 32154-2015 电袋复合除尘器性能测试方法(中英文版) Methods of performance tests for electrostatic-fabric integrated precipitator |
|||
GB/T 32004-2015 信息与文献 纸张上书写、打印和复印字迹的耐久和耐用性 要求与测试方法(中英文版) Information and documentation—Permanence and durability of writing,printing and copying on paper—Requirements and test methods |
|||
GB/T 30655-2014 氮化物LED外延片内量子效率测试方法(中英文版) Test methods for internal quantum efficiency of nitride LED epitaxial layers |
|||
GB/T 30671-2014 纸质印刷品紫外线固化光油上光过程控制要求及检验方法(中英文版) Ultraviolet curable varnishing process control requirements and testing methods for paper prints |
|||
GB/T 30790.6-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分:实验室性能测试方法(中英文版) Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods |
|||
GB/T 30268.1-2013 信息技术 生物特征识别应用程序接口(BioAPI)的符合性测试 第1部分:方法和规程(中英文版) Information technology—Conformance testing for the biometric application programming interface (BioAPI)—Part 1: Methods and procedures |
|||
GB/T 30040.7-2013 双层罐渗漏检测系统 第7部分:双层间隙、防渗漏衬里及防渗漏外套的一般要求和试验方法(中英文版) Leak detection systems―Part 7:General requirements and test methods for interstitial spaces,leak protecting linings and leak protecting jacket |
|||
GB/T 29847-2013 印制板用铜箔试验方法(中英文版) Test methods for copper foil used for printed boards |
|||
GB/T 30001.5-2013 信息技术 基于射频的移动支付 第5部分:射频接口测试方法(中英文版) Information technology - RF-based mobile payment - Part 5: Test methods of radio frequency interface |
|||
GB/T 29040-2012 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性(中英文版) Test methods of rolling resistance for motor vehicle tyres - Single point test and correlation of measurement results |
|||
GB/T 27411-2012 检测实验室中常用不确定度评定方法与表示(中英文版) Routine methods for evaluation and expression of measurement uncertainty in testing laboratory |
|||
GB/T 18861-2012 汽车轮胎和摩托车轮胎滚动阻力试验方法 多点试验(中英文版) Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres - Multi-point test |
|||
GB/T 28926-2012 信息技术 射频识别 2.45GHz空中接口符合性测试方法(中英文版) Information technology - Radio frequency identification - Conformance test methods for air interface at 2.45GHz |
|||
GB/T 2820.11-2012 往复式内燃机驱动的交流发电机组 第11部分:旋转不间断电源 性能要求和试验方法(中英文版) Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
|||
GB/T 2423.50-2012 环境试验 第2部分:试验方法 试验Cy: 恒定湿热 主要用于元件的加速试验(中英文版) Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components |
|||
GB/T 8243.9-2012 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests |
|||
GB/T 27934.2-2011 纸质印刷品覆膜过程控制及检测方法 第2部分:乙烯-醋酸乙烯共聚物(EVA)热熔胶预涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive |
|||
GB/T 27903-2011 电梯层门耐火试验 完整性、隔热性和热通量测定法(中英文版) Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux |
|||
GB/T 20633.2-2011 承载印制电路板用涂料(敷形涂料) 第2部分:试验方法(中英文版) Coatings for loaded printed wire boards (conformal coatings) - Part 2:Methods of test |
|||
GB 27934.1-2011 纸质印刷品覆膜过程控制及检测方法 第1部分:基本要求(中英文版) Lamination process control and testing methods for paper prints - Part 1: General requirements |
|||
GB/T 27934.3-2011 纸质印刷品覆膜过程控制及检测方法 第3部分:水基胶黏剂即涂干式覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive |
|||
GB/T 27934.4-2011 纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜(中英文版) Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive |
|||
GB/T 27662-2011 激光光束指向和位置稳定性测试方法(中英文版) Test methods for pointing and positional stability of laser beam |
|||
GB/T 28043-2011 利用实验室间比对进行能力验证的统计方法(中英文版) Statistical methods for use in proficiency testing by interlaboratory comparisons |
|||
GB/T 26948.1-2011 工业车辆驾驶员约束系统技术要求及试验方法 第1部分:腰部安全带(中英文版) Industrial trucks - Specifications and test methods for operator restraint systems - Part 1:Lap-type seat belts |
|||
GB/T 17491-2011 液压泵、马达和整体传动装置 稳态性能的试验及表达方法(中英文版) Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance |
|||
GB/T 17961-2010 印刷体汉字识别系统要求与测试方法(中英文版) Requirements and test methods for printed Chinese character recognition system |
|||
GB/T 7962.16-2010 无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版) Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature |
|||
GB 26448-2010 危险货物运输 炸药中间体(ANE)的敏感性试验方法和判据(中英文版) Transport of dangerous goods - Test methods and criteria relating to the sensitivity of ammonium nitrate emulsions, suspension or gels, intermediate for blasting explosives(ANE) |
|||
GB/T 25774.3-2010 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验(中英文版) Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint |
|||
GB/Z 6113.405-2010 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分:不确定度、统计学和限值建模替换试验方法的使用条件(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods |
|||
GB/T 19902.4-2010 工业自动化系统与集成 制造软件互操作性能力建规 第4部分:一致性测试方法、判则及报告(中英文版) Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
|||
GB/Z 24987-2010 纸、纸板和纸浆 测试方法不确定度的评定(中英文版) Paper, board and pulps - Estimation of uncertainty for test methods |
|||
GB/T 24684.3-2009 植物保护机械 评价清洗系统的试验方法 第3部分:药液箱的内部清洗(中英文版) Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 3: Internal cleaning of tank |
|||
GB/T 24684.1-2009 植物保护机械 评价清洗系统的试验方法 第1部分:喷雾机整机的内部清洗(中英文版) Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1:Internal cleaning of complete sprayers |
|||
GB/T 18359-2009 中小学教科书用纸、印制质量要求和检验方法(中英文版) General requirements and test methods of paper and printing qualities for primary and secondary school textbooks |
|||
GB/T 13255.2-2009 工业用己内酰胺试验方法 第2部分:结晶点的测定(中英文版) Test methods of caprolactam for industrial use - Part 2: Determination of crystallizing point |
|||
GB/T 22846-2009 针织布(四分制)外观检验(中英文版) Test methods of four points system for visually inspecting knitted fabrics |
|||
GB/T 22719.1-2008 交流低压电机散嵌绕组匝间绝缘 第1部分:试验方法(中英文版) Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods |
|||
GB/T 4334-2008 金属和合金的腐蚀 不锈钢晶间腐蚀试验方法(中英文版) Corrosion of metals and alloys - Test methods for intergranular corrosion of stainless steels |
|||
GB/T 540-2008 耐油石棉橡胶板试验方法(中英文版) Test methods for oil-resisting compressed asbestos fibre jointing |
|||
GB/T 2951.51-2008 电缆和光缆绝缘和护套材料通用试验方法 第51部分:填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率(中英文版) Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component |
|||
GB/T 12605-2008 无损检测 金属管道熔化焊环向对接接头射线照相检测方法(中英文版) Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
|||
GB/T 21781-2008 化学品的熔点及熔融范围试验方法 毛细管法(中英文版) Test methods for melting point and melting range of chemical products - Capillary tube method |
|||
GB/T 21777-2008 色漆和清漆用漆基 氯化聚合物树脂 通用试验方法(中英文版) Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test |
|||
GB/T 21646-2008 400MHz频段模拟公众无线对讲机技术规范和测量方法(中英文版) Technical specification and testing methods for analog public radio interphone on 400MHz band |
|||
GB/T 6072.1-2008 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求(中英文版) Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use |
|||
GB/T 21427-2008 特殊环境条件 干热沙漠对内燃机电站系统的技术要求及试验方法(中英文版) Special environmental condition - Requirements and test methods for electric powerplant with internal combustion engines in dry heat-desert |
|||
GB/Z 6113.401-2007 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分: 不确定度、统计学和限值建模 标准化的EMC试验不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests |
|||
GB/T 8243.12-2007 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity |
|||
GB/T 8243.11-2007 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters |
|||
GB/T 328.23-2007 建筑防水卷材试验方法 第23部分:高分子防水卷材 接缝剪切性能(中英文版) Test methods for building sheets for waterproofing - Part 23: Plastic and rubber sheets for waterproofing-resistance to shearing of joints |
|||
GB/T 328.22-2007 建筑防水卷材试验方法 第22部分:沥青防水卷材 接缝剪切性能(中英文版) Test methods foe building sheets for waterproofing - Part 22: Bitumen sheets for waterproofing-resistance to shearing of joints |
|||
GB/T 328.20-2007 建筑防水卷材试验方法 第20部分:沥青防水卷材 接缝剥离性能(中英文版) Test methods for building sheets for waterproofing - Part 20: Bitumen sheets for waterproofing-resistance to peeling of joints |
|||
GB/T 8243.7-2006 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test |
|||
GB/T 3318-2006 电力机车制成后投入使用前的试验方法(中英文版) Test methods for electric locomotives on completion of construction and before entry into service |
|||
GB/T 3315-2006 内燃机车制成后投入使用前的试验方法(中英文版) Test methods for diesel locomotives on completion of construction and before entry into service |
|||
GB/T 8243.5-2006 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test |
|||
GB/T 8243.6-2006 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test |
|||
GB/T 13448-2006 彩色涂层钢板及钢带试验方法(中英文版) Test methods for Prepainted Steel Sheet |
|||
GB/T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture |
|||
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|||
GB/T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure |
|||
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
|||
GB/T 19816.2-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution |
|||
GB/T 19816.1-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling |
|||
GB/T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density |
|||
GB/T 15812.1-2005 非血管内导管 第1部分:一般性能试验方法(中英文版) Catheters other than intravascular catheters-Part 1:Test methods for common properties |
|||
GB/T 8243.4-2003 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法)(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method) |
|||
GB/T 8243.3-2003 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature |
|||
GB/T 8243.2-2003 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics |
|||
GB/T 8243.1-2003 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics |
|||
GB/T 16656.34-2002 工业自动化系统与集成 产品数据的表达与交换 第34部分:一致性测试方法论与框架:应用协议实现的抽象测试方法(中英文版) Industrial automation systems and integration--Product data representation and exchange--Part 34:Conformance testing methodology and framework:Abstract test methods for application protocol implementations |
|||
GB/T 17849-1999 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法(中英文版) Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives |
|||
GB/T 16513-1996 抑制射频干扰固定电感器 第2部分 分规范 试验方法和一般要求的选择(中英文版) Fixed inductors for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements |
|||
GB/T 16310.3-1996 船舶散装运输液体化学品危害性评价规范 水生生物沾染试验方法(中英文版) Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Taint testing method for aquatic organism |
|||
GB/T 15288-1994 抑制射频干扰整件滤波器 第二部分:分规范 试验方法的选择和一般要求(中英文版) Complete filter units for radio interference suppression--Part 2:Sectional specification--Selection of methods of test and general requirements |
|||
GB/T 14862-1993 半导体集成电路封装结到外壳热阻测试方法(中英文版) Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits |
|||
GB/T 4722-1992 印制电路用覆铜箔层压板试验方法(中英文版) Test methods for copper-clad laminatedsheets for printed circuits |
|||
GB/T 13557-1992 印制电路用挠性覆铜箔材料试验方法(中英文版) Test methods for flexible copper-clad material for printed circuits |
|||
GB/T 6753.3-1986 涂料贮存稳定性试验方法(中英文版) Methods of test for package stability of paints |
|||
GB/T 1724-1979 涂料细度测定法(中英文版) Methods of test for fineness of grind of paints |
|||
GB/T 1728-1979 漆膜、腻子膜干燥时间测定法(中英文版) Methods of test for drying time of coatingsof paints and putties |
|||
GB/T 1726-1979 涂料遮盖力测定法(中英文版) Methods of test for hiding power of paints |
找到:147條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |