中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB/T 3301-2023 日用陶瓷器规格误差和缺陷尺寸的测定方法（中英文版） Determination method of specification error and defect size of ceramics for daily use |
 |
|
|
|
GB/T 42637-2023 大洋多金属硫化物资源调查规范（中英文版） Specifications for investigation of oceanic polymetallic sulphide resources |
|
|
|
|
GB/T 42556-2023 电能表监督管理规范（中英文版） Specifications for Supervision and Management of Electric Energy Meters |
|
|
|
|
GB/T 18779.3-2023 产品几何技术规范（GPS） 工件与测量设备的测量检验 第3部分：关于测量不确定度表述达成共识的指南（中英文版） Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment - Part 3: Guidance on reaching consensus on the expression of measurement uncertainty |
|
|
|
|
GB/T 18779.2-2023 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分：GPS测量、测量设备校准和产品验证中的测量不确定度评估指南（中英文版） Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification |
|
|
|
|
GB/T 42352-2023 金属覆盖层 钢铁上物理气相沉积镉涂层 技术规范与试验方法（中英文版） Metallic coatings - Physical vapor deposition of cadmium coatings on iron and steel - Specifications and test methods |
|
|
|
|
GB/T 43412-2023 金属薄板电阻点焊推荐工艺规范（中英文版） Recommended process specifications for resistance spot welding of metal sheets |
|
|
|
|
GB/Z 6113.404-2023 无线电骚扰和抗扰度测量设备和测量方法规范 第4-4部分：不确定度、统计学和限值建模 投诉的统计和保护无线电业务的限值计算模型（中英文版） Specification for radio disturbance and immunity measuring equipment and measurement methods Part 4-4: Uncertainty, statistics and limit value modeling Statistics of complaints and limit value calculation model for the protection of radio services |
|
|
|
|
GB/T 6113.402-2022 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分：不确定度、统计学和限值建模 测量设备和设施的不确定度（中英文版） Specifications for radio disturbance and immunity measuring equipment and methods of measurement - Part 4-2: Uncertainty, statistics and limit value modeling Uncertainties of measuring equipment and facilities |
|
|
|
|
GB/T 42197-2022 公安物联网视频图像内容元数据描述规范（中英文版） Specification for Metadata Description of Video Image Content in Public Security Internet of Things |
|
|
|
|
GB/T 33523.3-2022 产品几何技术规范（GPS） 表面结构 区域法 第3部分：规范操作集（中英文版） Geometric Product Specification (GPS) Surface Structure Area Method Part 3: Set of Specification Operations |
|
|
|
|
GB/T 33523.603-2022 产品几何技术规范（GPS） 表面结构 区域法 第603部分：非接触（相移干涉显微）式仪器的标称特性（中英文版） Product Geometry Specification (GPS) Surface Structure Area Method Part 603: Nominal Properties of Non-Contact (Phase Shift Interferometry) Type Instruments |
|
|
|
|
GB/T 33523.604-2022 产品几何技术规范（GPS） 表面结构 区域法 第604部分：非接触（相干扫描干涉）式仪器的标称特性（中英文版） Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent Scanning Interferometry) Type Instruments |
|
|
|
|
GB/T 16857.12-2022 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第12部分：关节臂式坐标测量机（中英文版） Geometric product specification (GPS) Acceptance testing and re-inspection testing of coordinate measuring systems (CMS) Part 12: Coordinate measuring machines with articulated arms |
|
|
|
|
GB/T 33523.602-2022 产品几何技术规范（GPS） 表面结构 区域法 第602部分：非接触（共聚焦色差探针）式仪器的标称特性（中英文版） Product Geometry Specification (GPS) Surface Structure Area Method Part 602: Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Type Instruments |
|
|
|
|
GB/T 33523.606-2022 产品几何技术规范（GPS） 表面结构 区域法 第606部分：非接触（变焦）式仪器的标称特性（中英文版） Geometric Product Specification (GPS) Surface Structure Area Method Part 606: Nominal Characteristics of Non-Contact (Zoom) Type Instruments |
|
|
|
|
GB/T 33523.605-2022 产品几何技术规范（GPS） 表面结构 区域法 第605部分：非接触（点自动对焦探针）式仪器的标称特性（中英文版） Product Geometric Specifications (GPS) Surface Structure Area Method Part 605: Nominal Characteristics of Non-Contact (Point AF Probe) Type Instruments |
|
|
|
|
GB/T 41816-2022 物联网 面向智能燃气表应用的物联网系统技术规范（中英文版） Internet of Things Technical Specifications for Internet of Things System for Smart Gas Meter Applications |
|
|
|
|
GB/T 42124.1-2022 产品几何技术规范（GPS） 模制件的尺寸和几何公差 第1部分：词汇（中英文版） Geometric product specification (GPS) Dimensional and geometric tolerances of molded parts - Part 1: Vocabulary |
|
|
|
|
GB/T 18779.1-2022 产品几何技术规范(GPS) 工件与测量设备的测量检验 第1部分：按规范验证合格或不合格的判定规则（中英文版） Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1: Rules for Passing or Failing Verification According to Specifications |
|
|
|
|
GB 40164-2021 汽车和挂车 制动器用零部件技术要求及试验方法（中英文版） Automobiles and trailer — Specifications and test methods of brake part |
|
|
|
|
GB/T 40548-2021 煤层气井分层控压合层排采技术规范（中英文版） Technical specification of separate layers pressure control and combined layers drainage for coalbed methane wells |
|
|
|
|
GB/T 17850.9-2021 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite |
|
|
|
|
GB/T 40375-2021 金属连接（紧固）结构耐蚀作业技术规范（中英文版） Technical specification of corrosion control operation for metal connection (fastening) structure |
|
|
|
|
GB 40164-2021 汽车和挂车 制动器用零部件技术要求及试验方法（中英文版） Automobiles and trailer - Specifications and test methods of brake part |
|
|
|
|
GB/T 15972.30-2021 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验（中英文版） Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test |
|
|
|
|
GB/T 34077.2-2021 基于云计算的电子政务公共平台管理规范 第2部分：服务度量计价（中英文版） Management specification of electronic government common platform based on cloud computing -- Part 2: Services metrics and valuation |
|
|
|
|
GB/T 41104.2-2021 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定（中英文版） Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content |
|
|
|
|
GB/T 41012-2021 含有色金属固体废物回收利用技术规范（中英文版） Technical specifications for collection and recovery of non-ferrous metal contained solid waste |
|
|
|
|
GB/T 40742.5-2021 产品几何技术规范（GPS） 几何精度的检测与验证 第5部分:几何特征检测与验证中测量不确定度的评估（中英文版） Geometrical product specifications (GPS)—Geometrical precisionverification—Part 5:Estimation of uncertainty of measurement for geometrical characteristics verification |
|
|
|
|
GB/T 40810.2-2021 产品几何技术规范（GPS） 生产过程在线测量 第2部分：几何特征（形位）的在线检测与验证（中英文版） Geometrical product specifications (GPS)—Online measurement in process—Part 2：Online verifications of geometric features（form and position） |
|
|
|
|
GB/T 40810.1-2021 产品几何技术规范（GPS） 生产过程在线测量 第1部分：几何特征（尺寸、表面结构）的在线检测与验证（中英文版） Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture) |
|
|
|
|
GB/T 40742.4-2021 产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式（中英文版） Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone |
|
|
|
|
GB/T 40742.2-2021 产品几何技术规范（GPS） 几何精度的检测与验证 第2部分：形状、方向、位置、跳动和轮廓度特征的检测与验证（中英文版） Geometrical product specifications (GPS)—Geometrical precision verification—Part 2：Verification of form characteristics, orientation characteristics, position characteristics, run-out characteristics and profile characteristics |
|
|
|
|
GB/T 40523-2021 1:25000 1:50000光学测绘卫星几何检校技术规范（中英文版） Technology specification for geometric calibration of 1:25000 1:50000 optical mapping satellite |
|
|
|
|
GB 39800.3-2020 个体防护装备配备规范 第3部分：冶金、有色（中英文版） Specifications for the provision of personal protective equipment—Part 3：Metallurgy,nonferrous metals |
|
|
|
|
GB/T 39518-2020 产品几何技术规范（GPS） 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南（中英文版） Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
|
|
|
|
GB/T 39203-2020 铜冶炼烟灰提取有价金属技术规范（中英文版） Technical specifications for extraction of valuable metals from copper smelting dust |
|
|
|
|
GB/T 39216-2020 行政许可流程优化的方法与技术规范（中英文版） Method and technical specification for improvement of administrative licensing process |
|
|
|
|
GB/T 38984.1-2020 基于属性的产品信息通用规范 第1部分：原则和方法（中英文版） Generic specification of information on products by properties—Part 1: Principles and methods |
|
|
|
|
GB/T 39029-2020 生物产品去除重金属功效评价技术规范（中英文版） Technical specification of efficacy evaluation for removing of heavy metal by biological products |
|
|
|
|
GB/T 14563-2020 高岭土及其试验方法（中英文版） Specification and test method of kaolin clay |
|
|
|
|
GB/T 1800.1-2020 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础（中英文版） Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits |
|
|
|
|
GB/T 38615-2020 超声波物位计通用技术条件（中英文版） General specification of ultrasonic levelmeter |
|
|
|
|
GB/T 1800.2-2020 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表（中英文版） Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
|
|
|
|
GB/T 34874.6-2020 产品几何技术规范（GPS） X射线三维尺寸测量机 第6部分：工件的检测方法（中英文版） Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces |
|
|
|
|
GB/T 38371.3-2020 数字内容对象存储、复用与交换规范 第3部分：对象一致性检查方法（中英文版） Specification of digital content object storage, reuse and exchange—Part 3: Object conformance examination method |
|
|
|
|
GB/T 25156-2020 橡胶塑料注射成型机通用技术要求及检测方法（中英文版） General specifications and inspection methods of rubber and plastics injection moulding machines |
|
|
|
|
GB/T 26958.28-2020 产品几何技术规范（GPS） 滤波 第28部分: 轮廓滤波器 端部效应（中英文版） Geometrical product specifications (GPS)—Filtration—Part 28: Profile filters：End effects |
|
|
|
|
GB/T 18779.4-2020 产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础（中英文版） Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules |
|
|
|
|
GB/T 26958.21-2020 产品几何技术规范（GPS） 滤波 第21部分：线性轮廓滤波器 高斯滤波器（中英文版） Geometrical product specifications (GPS)—Filtration—Part 21: Linear profile filters: Gaussian filters |
|
|
|
|
GB/T 24635.1-2020 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第1部分：概要和计量特性（中英文版） Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics |
|
|
|
|
GB/T 6113.203-2020 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3部分：无线电骚扰和抗扰度测量方法 辐射骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of measurement of disturbances and immunity—Radiated disturbance measurements |
|
|
|
|
GB/T 18779.6-2020 产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则（中英文版） Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
|
|
|
|
GB/T 33523.1-2020 产品几何技术规范（GPS） 表面结构 区域法 第1部分：表面结构的表示法（中英文版） Geometrical product specifications (GPS)—Surface texture: Areal—Part 1: Indication of surface texture |
|
|
|
|
GB/T 33523.71-2020 产品几何技术规范（GPS） 表面结构 区域法 第71部分：软件测量标准（中英文版） Geometrical product specifications (GPS)—Surface texture: Areal—Part 71: Software measurement standards |
|
|
|
|
GB/T 39643-2020 产品几何技术规范（GPS） 长度测量中温度影响引入的系统误差和测量不确定度来源（中英文版） Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
|
|
|
|
GB/T 24635.4-2020 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度（中英文版） Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation |
|
|
|
|
GB/T 18779.5-2020 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度（中英文版） Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments |
|
|
|
|
GB/T 39415.2-2020 包装袋 特征性能规范方法 第2部分：热塑性软质薄膜袋（中英文版） Packaging sacks—Method of specifications for characteristics—Part 2: Sacks made from thermoplastic flexible film |
|
|
|
|
GB/T 39415.1-2020 包装袋 特征性能规范方法 第1部分：纸袋（中英文版） Packaging sacks—Method of specifications for characteristics—Part 1: Paper sacks |
|
|
|
|
GB/Z 6113.403-2020 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分：不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products |
|
|
|
|
GB/T 39247-2020 增材制造 金属制件热处理工艺规范（中英文版） Additive manufacturing—Specification for heat treatment process of metal parts |
|
|
|
|
GB/T 39252-2020 增材制造 金属材料粉末床熔融工艺规范（中英文版） Additive manufacturing—Specification for powder bed fusion process of metal materials |
|
|
|
|
GB/T 39253-2020 增材制造 金属材料定向能量沉积工艺规范（中英文版） Additive manufacturing—Specification for directed energy deposition of metal materials |
|
|
|
|
GB/T 16310.5-2019 船舶散装运输液体化学品危害性评价规范 第5部分：危害性评价程序与污染分类方法（中英文版） Specification on evaluation method of hazards of liquid chemical transported in bulk by shipping－Part 5: Hazard evaluation procedure and determination of pollution category |
|
|
|
|
GB/T 38439-2019 室外照明干扰光测量规范（中英文版） Measuring specifications for methods to obtrusive light of outdoor lighting |
|
|
|
|
GB/T 37523-2019 风电场气象观测资料审核、插补与订正技术规范（中英文版） Specification for data inspection and correction of wind power plant meteorological observation |
|
|
|
|
GB/T 37301-2019 地面气象资料服务产品技术规范（中英文版） Technical specification of surface meteorological data product |
|
|
|
|
GB/T 38368-2019 产品几何技术规范（GPS） 基于数字化模型的测量通用要求（中英文版） Geometrical product specifications (GPS)—Requirements of digital model-based measurement |
|
|
|
|
GB/T 1182-2018 产品几何技术规范（GPS） 几何公差 形状、方向、位置和跳动公差标注（中英文版） Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out |
|
|
|
|
GB/T 6113.201-2018 无线电骚扰和抗扰度测量设备和测量方法规范-第2-1部分：无线电骚扰和抗扰度测量方法-传导骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods－Part 2-1：Methods of measurement of disturbances and immunity－Conducted disturbance measurements |
|
|
|
|
GB/T 19181-2018 生咖啡 分级方法导则（中英文版） Green coffee—Guidelines on methods of specification |
|
|
|
|
GB/T 35979-2018 金属波纹管膨胀节选用、安装、使用维护技术规范（中英文版） Technical specification for selection,installation,use and maintenance of metal bellows expansion joints |
|
|
|
|
GB/T 11313.11-2018 射频连接器 第11部分：外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范（中英文版） Radio-frequency connectors—Part 11：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) |
|
|
|
|
GB/T 17852-2018 产品几何技术规范（GPS） 几何公差 轮廓度公差标注（中英文版） Geometrical product specifications(GPS)—Geometrical tolerancing—Profile tolerancing |
|
|
|
|
GB/T 24845-2018 1000kV交流系统用无间隙金属氧化物避雷器技术规范（中英文版） Specification of metal–oxide surge arresters without gaps for 1000kV a.c. system |
|
|
|
|
GB/T 6113.202-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第2-2 部分：无线电骚扰和抗扰度测量方法 骚扰功率测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-2: Methods of measurement of disturbances and immunity—Measurement of disturbance power |
|
|
|
|
GB/T 36277-2018 电动汽车车载静止式直流电能表技术条件（中英文版） Technical specification for on-board static DC electric energy meter of electric vehicle |
|
|
|
|
GB/T 36742-2018 气象灾害防御重点单位气象安全保障规范（中英文版） Specifications for safeguard measures of the key units of meteorological disaster prevention |
|
|
|
|
GB/T 34879-2017 产品几何技术规范（GPS） 光学共焦显微镜计量特性及测量不确定度评定导则（中英文版） Geometrical product specifications (GPS)—Metrological characteristics and guide to uncertainty of measurement for optical confocal microscopes |
|
|
|
|
GB/T 34881-2017 产品几何技术规范（GPS） 坐标测量机的检测不确定度评估指南（中英文版） Geometrical product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
|
|
|
|
GB/T 34540-2017 甲醇转化变压吸附制氢系统技术要求（中英文版） Specification of hydrogen production by methanol reforming and pressure swing adsorption |
|
|
|
|
GB/T 34547-2017 煤矿区煤层气地面抽采效果检测与评价（中英文版） Specification for detection and evaluation of coalbed methane surface drainage effect in coal mine |
|
|
|
|
GB/T 34634-2017 产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择（中英文版） Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument |
|
|
|
|
GB/T 15972.44-2017 光纤试验方法规范 第44部分：传输特性和光学特性的测量方法和试验程序 截止波长（中英文版） Specifications for optical fibre test methods—Part 44: Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength |
|
|
|
|
GB/T 6113.201-2017 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1 部分：无线电骚扰和抗扰度测量方法 传导骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-1: Methods of measurement of disturbances and immunity—Conducted disturbance measurements |
|
|
|
|
GB/T 18762-2017 贵金属及其合金钎料规范（中英文版） Specification for filler brazing materials made of precious metal and their alloy |
|
|
|
|
GB/T 26831.4-2017 社区能源计量抄收系统规范 第4部分：仪表的无线抄读（中英文版） Specification for reading system of energy metering in community—Part 4：Wireless meter readout |
|
|
|
|
GB/T 26831.5-2017 社区能源计量抄收系统规范 第5部分：无线中继（中英文版） Specification for reading system of energy metering in community—Part 5：Wireless relaying |
|
|
|
|
GB/Z 33902-2017 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法（中英文版） Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods |
|
|
|
|
GB/T 33657-2017 纳米技术 晶圆级纳米尺度相变存储单元电学操作参数测试规范（中英文版） Nanotechnologies—Electrical operating parameter test specification of wafer level nano-scale phase change memory cells |
|
|
|
|
GB/T 33697-2017 公路交通气象监测设施技术要求（中英文版） Specification for meteorological observation facilities of highway traffic |
|
|
|
|
GB/Z 26958.30-2017 产品几何技术规范(GPS) 滤波 第30部分：稳健轮廓滤波器 基本概念（中英文版） Geometrical product specifications (GPS)—Filtration—Part 30: Robust profile filters—Basic concept |
|
|
|
|
GB/T 33523.6-2017 产品几何技术规范(GPS) 表面结构 区域法 第6部分：表面结构测量方法的分类（中英文版） Geometrical product Specifications (GPS)—Surface texture: Areal—Part 6: Classification of methods for measuring surface texture |
|
|
|
|
GB/T 33523.601-2017 产品几何技术规范(GPS) 表面结构 区域法 第601部分：接触(触针)式仪器的标称特性（中英文版） Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal characteristics of contact (stylus) instruments |
|
|
|
|
GB/T 18838.2-2017 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit |
|
|
|
|
GB/T 35400-2017 燃油加油机计量检定移动实验室通用技术规范（中英文版） General technical specification for mobile laboratory of fuel dispensers metrological verification |
|
|
|
|
GB/T 17850.5-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag |
|
|
|
|
GB/T 17850.1-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification |
|
|
|
|
GB/T 17850.4-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分：煤炉渣（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag |
|
|
|
|
GB/T 17850.7-2017 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide |
|
|
|
|
GB/T 33480-2016 党政机关电子公文元数据规范（中英文版） Metadata specification for electronic official document of Party and government organs |
|
|
|
|
GB/T 32965-2016 钢渣中金属回收处理技术规范（中英文版） Technical specifications on metal recovery of steel slag |
|
|
|
|
GB/T 6113.203-2016 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3 部分：无线电骚扰和抗扰度测量方法 辐射骚扰测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of measurement of disturbances and immunity—Radiated disturbance measurements |
|
|
|
|
GB/T 32095.3-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第3部分：耐腐蚀性测试规范（中英文版） Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 3：Test specification of corrosion resistance |
|
|
|
|
GB/T 32095.2-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第2部分：不粘性及耐磨性测试规范（中英文版） Performance and test methods of non-stick surface of domestic metal cooking utensils for household food—Part 2：Specification on non-stick performance and abrasion resistance |
|
|
|
|
GB/T 20726-2015 微束分析 电子探针显微分析X射线能谱仪主要性能参数及核查方法（中英文版） Microbeam analysis—Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis |
|
|
|
|
GB/T 32095.4-2015 家用食品金属烹饪器具不粘表面性能及测试规范 第4部分：食物模拟测试规范及评价方法（中英文版） Test specification on simulative test and evaluation methods with food for non-stick surface of domestic metal utensils for household food |
|
|
|
|
GB/T 18838.5-2015 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸（中英文版） Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot |
|
|
|
|
GB/T 11313.8-2015 射频连接器 第8部分：外导体内径为6.5mm(0.256in)、特性阻抗为50Ω（75Ω）、卡口连接的射频同轴连接器（BNC型）分规范（中英文版） Radio-frequency connectors—Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock—Characteristic impedance 50Ω（75Ω）(type BNC) |
|
|
|
|
GB/T 11313.16-2015 射频连接器 第16部分：外导体内径为7mm（0.276in）、特性阻抗为50Ω（75Ω）、螺纹连接的射频同轴连接器（N型）分规范（中英文版） Radio-frequency connectors—Part 16：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N) |
|
|
|
|
GB/T 31769-2015 创新方法应用能力等级规范（中英文版） Rating specification for applied competence of innovation method |
|
|
|
|
GB/T 31425-2015 库仑测硫仪技术条件（中英文版） Specifications for determinator of sulfur by coulometric titration |
|
|
|
|
GB/T 31566-2015 金属覆盖层 物理气相沉积铝涂层 技术规范与检测方法（中英文版） Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods |
|
|
|
|
GB/T 30639-2014 全自动金属罐浓酱（浆）灌装封罐机通用技术条件（中英文版） General technical specification of automatic metal canned sauce(syrup) filling and sealing machine |
|
|
|
|
GB/T 30687-2014 馆藏金属文物保护修复记录规范（中英文版） Specification for recording conservation and restoration of metal collection |
|
|
|
|
GB/T 31246-2014 水处理剂 阳离子型聚丙烯酰胺的技术条件和试验方法（中英文版） Water treatment chemicals—Technical specification and test method of cationic polyacrylamides |
|
|
|
|
GB 31222-2014 气象探测环境保护规范 高空气象观测站（中英文版） Specifications for observing environs protection of upper-air meteorological station |
|
|
|
|
GB 31221-2014 气象探测环境保护规范 地面气象观测站（中英文版） Specifications for observing environs protection of surface meteorological station |
|
|
|
|
GB/T 31162-2014 地面气象观测场（室）防雷技术规范（中英文版） Technical specification for lightning protection of surface meteorological observing site and duty office |
|
|
|
|
GB/T 18735-2014 微束分析 分析电镜（ＡＥＭ／ＥＤＳ）纳米薄标样通用规范（中英文版） Microbeam analysis—General guide for the specification of nanometer thin reference materials for analytical transmission electron microscope (AEM/EDS) |
|
|
|
|
GB/T 30722-2014 水性油墨颜色的表示方法（中英文版） Method of specification for water-based ink color |
|
|
|
|
GB/T 30571-2014 金属冷冲压件 通用技术条件（中英文版） General specifications of sheet metal stamping parts |
|
|
|
|
GB/T 18204.6-2013 公共场所卫生检验方法 第6部分：卫生监测技术规范（中英文版） Examination methods for public places―Part 6: Technical specifications of health monitoring |
|
|
|
|
GB/Z 6113.205-2013 无线电骚扰和抗扰度测量设备和测量方法规范 第2-5部分：大型设备骚扰发射现场测量（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods―Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment |
|
|
|
|
GB/T 30143-2013 YZR系列起重及冶金用绕线转子三相异步电动机技术条件（机座号450～500）（中英文版） Specification for YZR series of wound-rotor three-phase induction motors for crane and metallurgical applications |
|
|
|
|
GB/T 29872-2013 工业企业能源计量数据集中采集终端通用技术条件（中英文版） Generic specification of energy metrology data concentrated collection terminal of industrial enterprise |
|
|
|
|
GB/T 29844-2013 用于先进集成电路光刻工艺综合评估的图形规范（中英文版） Specifications of metrology patterns for the evaluation of advanced photolithgraphy |
|
|
|
|
GB 50882-2013 轻金属冶炼机械设备安装工程施工规范（中英文版） Code for construction specification of light-metal smelting mechanical equipment installation engineering |
|
|
|
|
GB/T 29119-2012 煤层气资源勘查技术规范（中英文版） Technical specification of coalbed methane resource exploration |
|
|
|
|
GB/T 15637-2012 数字多用表校准仪通用规范（中英文版） General specification for calibrator of digital multimeter |
|
|
|
|
GB/T 29046-2012 城镇供热预制直埋保温管道技术指标检测方法（中英文版） Test methods of technical specification for pre-insulated directly buried district heating pipes |
|
|
|
|
GB/T 29036-2012 不锈钢表面氧化着色 技术规范和试验方法（中英文版） Coloring of stainless steel by Oxidation - Specification and test methods |
|
|
|
|
GB/T 28869.1-2012 软磁材料制成的磁心 测量方法 第1部分：通用规范（中英文版） Cores made of soft magnetic materials - Measuring methods - Part 1：Generic specification |
|
|
|
|
GB/T 28435-2012 地面数字电视广播发射机技术要求和测量方法（中英文版） Technical specifications and methods of measurement for digital terrestrial television broadcasting transmitters |
|
|
|
|
GB/T 17157-2012 1:25 000 1:50 000 1:100 000地形图航空摄影测量解析测图规范（中英文版） Specifications for aerial photogrammetric analytical mapping of 1:25 000 1:50 000 1:100 000 topographic maps |
|
|
|
|
GB/T 13990-2012 1:5 000 1:10 000 地形图航空摄影测量内业规范（中英文版） Specifications for aerophotogrammetric office operation of 1:5 000 1:10 000 topographic maps |
|
|
|
|
GB/T 13977-2012 1:5 000 1:10 000 地形图航空摄影测量外业规范（中英文版） Specifications for aerophotogrammetric field work of 1:5 000 1:10 000 topographic maps |
|
|
|
|
GB/T 2688-2012 滑动轴承 粉末冶金轴承技术条件（中英文版） Plain bearing - Technical specification of powder metallurgy bearing |
|
|
|
|
GB/T 17850.11-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分：钢渣特种型砂（中英文版） Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag |
|
|
|
|
GB/T 27623.1-2011 渔用抗菌药物药效试验技术规范 第1部分：常量肉汤稀释法药物敏感性试验（中英文版） Pharmacodynamic test technical specification for aquaculture antimicrobial agent - Part 1: Antibiotics susceptibility test of macro-broth dilution method |
|
|
|
|
GB/T 17850.6-2011 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣（中英文版） Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag |
|
|
|
|
GB/T 27678-2011 湿法炼锌企业废水循环利用技术规范（中英文版） The technical specification of waste water recycle fo hydrometallurgical zinc enterprise |
|
|
|
|
GB/T 11441.2-2011 通信和电子设备用变压器和电感器铁心片 第2部分：软磁金属叠片最低磁导率规范（中英文版） Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials |
|
|
|
|
GB/Z 26958.29-2011 产品几何技术规范(GPS) 滤波 第29部分：线性轮廓滤波器 样条小波（中英文版） Geometrical Product Specifications (GPS) - Filtration - Part 29: Linear profile filters：Spline wavelets |
|
|
|
|
GB/Z 26958.22-2011 产品几何技术规范(GPS) 滤波 第22部分：线性轮廓滤波器 样条滤波器（中英文版） Geometrical Product Specifications (GPS) - Filtration - Part 22: Linear profile filters : Spline filters |
|
|
|
|
GB/Z 26958.31-2011 产品几何技术规范(GPS) 滤波 第31部分：稳健轮廓滤波器 高斯回归滤波器（中英文版） Geometrical Product Specifications (GPS) - Filtration - Part 31: Robust profile filters - Gaussian regression filters |
|
|
|
|
GB/Z 26958.32-2011 产品几何技术规范(GPS) 滤波 第32部分：稳健轮廓滤波器 样条滤波器（中英文版） Geometrical Product Specifications (GPS) - Filtration - Part 32: Robust profile filters：Spline filters |
|
|
|
|
GB/Z 26958.40-2011 产品几何技术规范(GPS) 滤波 第40部分：形态学轮廓滤波器 基本概念（中英文版） Geometrical Product Specifications (GPS) - Filtration - Part 40: Morphological profile filter：Basic concepts |
|
| 找到:281條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |
