中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 42125.14-2023
测量、控制和实验室用电气设备的安全要求 第14部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
  GB 43473-2023
照明产品用控制装置及其部件 安全要求(中英文版)
Control devices and components for lighting products Safety requirements
  GB/T 19510.1-2023
光源控制装置 第 1 部分:一般要求和安全要求(中英文版)
Light source control devices Part 1: General and safety requirements
  GB/T 43342-2023
带有远程操作功能的家用和类似用途电器自动控制器的安全要求(中英文版)
Safety requirements for automatic controllers of household and similar electrical appliances with remote operation functions
  GB/T 43347-2023
核电厂安全重要电气、仪表与控制设备环境参数的监测(中英文版)
Monitoring of environmental parameters of electrical, instrumentation and control equipment important for nuclear power plant safety
  GB/T 16895.22-2022
低压电气装置 第5-53部分:电气设备的选择和安装 用于安全防护、隔离、通断、控制和监测的电器(中英文版)
Low-voltage electrical installations - Part 5-53: Selection and installation of electrical equipment. Electrical appliances for safety protection, isolation, switching, control and monitoring
  GB/T 19671-2022
机械安全 双手操纵装置 设计和选择原则(中英文版)
Safety of machinery - Two-hand controls - Principles for design and selection
  GB/T 18268.31-2022
测量、控制和实验室用的电设备 电磁兼容性要求 第31部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 一般工业应用(中英文版)
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera
  GB/T 18268.32-2022
测量、控制和实验室用的电设备 电磁兼容性要求 第32部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 特定电磁环境的工业应用(中英文版)
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu
  GB/T 42125.10-2022
测量、控制和实验室用电气设备的安全要求 第10部分:绝缘电阻测量和介电强度试验设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric strength test equipment
  GB/T 42125.19-2022
测量、控制和实验室用电气设备的安全要求 第19部分:电动控制阀门执行器的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves
  GB/T 41142-2021
核电厂安全重要数字仪表和控制系统硬件设计要求(中英文版)
Hardware design requirements of computer-based instrumentation and control systems important to safety for nuclear power plants
  GB 9706.224-2021
医用电气设备 第2-24部分:输液泵和输液控制器的基本安全和基本性能专用要求(中英文版)
Medical electrical equipment—Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
  GB/T 24621.1-2021
低压成套开关设备和控制设备的电气安全应用指南 第1部分:成套开关设备(中英文版)
Application guide for electric safety of low-voltage switchgear and controlgear assemblies—Part 1: switchgear assemblies
  GB/T 40444-2021
核电厂安全重要仪表和控制系统总体要求(中英文版)
General requirements for instrumentation and control systems important to safety in nuclear power plants
  GB 31653-2021
食品安全国家标准 食品中黄曲霉毒素污染控制规范(中英文版)
National Food Safety Standards Specifications for Control of Aflatoxin Contamination in Food
  GB/T 39521-2020
农业拖拉机和机械 拖拉机和自走式机械的自动导航系统 安全要求(中英文版)
Tractors and machinery for agriculture—Auto-guidance systems for operator-controlled tractors and self-propelled machines—Safety requirements
  GB/T 38756-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 点火装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Ignition unit
  GB/T 38874.4-2020
农林拖拉机和机械 控制系统安全相关部件 第4部分:生产、运行、修改与支持规程(中英文版)
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 4:Production,operation,modification and supporting processes
  GB/T 38874.3-2020
农林拖拉机和机械 控制系统安全相关部件 第3部分:软硬件系列开发(中英文版)
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 3: Series development,hardware and software
  GB/T 38874.2-2020
农林拖拉机和机械 控制系统安全相关部件 第2部分:概念阶段(中英文版)
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 2: Concept phase
  GB/T 38874.1-2020
农林拖拉机和机械 控制系统安全相关部件 第1部分:设计与开发通则(中英文版)
Tractors and machinery for agriculture and forestry—Safety-related parts of control systems—Part 1:General principles for design and development
  GB/T 38693-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 热电式熄火保护装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Thermoelectric flame supervision controls
  GB/T 38595-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 机械式温度控制装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Mechanical thermostats
  GB/T 38603-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 电子控制器(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Electronic controller
  GB 9706.217-2020
医用电气设备 第2-17部分:自动控制式近距离治疗后装设备的基本安全和基本性能专用要求(中英文版)
Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment
  GB/T 39673.3-2020
住宅和楼宇电子系统(HBES)及楼宇自动化和控制系统(BACS) 第3部分:电气安全要求(中英文版)
Home and building electronic systems (HBES) and building automation and control systems (BACS)—Part 3: Electrical safety requirements
  GB/T 39493-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力调节装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure regulators
  GB/T 39488-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 电子式燃气与空气比例控制系统(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Electronic type gas and air ratio control system
  GB/T 39485-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 手动燃气阀(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Manual gas valves
  GB/T 37499-2019
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 自动和半自动阀(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Automatic and semi-automatic valves
  GB 4793.4-2019
测量、控制和实验室用电气设备的安全要求 第4部分:用于处理医用材料的灭菌器和清洗消毒器的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement,control and laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  GB/T 37992-2019
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 自动截止阀的阀门检验系统(中英文版)
Safety and control devices for gas burners and gas-burning-appliances—Particular requirements—Vavle-proving systems for automatic shut-off valves
  GB/T 36006-2018
控制与通信网络 Safety-over-EtherCAT规范(中英文版)
Control and communicatoin network—Safety-over-EtherCAT specification
  GB/T 34923.5-2017
路灯控制管理系统 第5部分:安全防护技术规范(中英文版)
Street lights control and management system—Part 5: Technical specification of safety protection
  GB/T 34353-2017
土方机械 应用电子器件的机器控制系统(MCS) 功能性安全的性能准则和试验(中英文版)
Earth-moving machinery-Machine-control systems (MCS) using electronic components-Performance criteria and tests for functional safety
  GB/T 34402-2017
汽车产品安全 风险评估与风险控制指南(中英文版)
Safety of motor vehicle product—Guidelines for risk assessment and risk control
  GB/Z 34066-2017
控制与通信网络CIP Safety规范(中英文版)
Control and communicatoin network CIP Safety specification
  GB/T 34136-2017
机械电气安全 GB 28526和GB/T 16855.1用于机械安全相关控制系统设计的应用指南(中英文版)
Electrical safety of machinery—Guidance on the application of GB 28526 and GB/T 16855.1 in the design of safety-related control systems for machinery
  GB/T 33191-2016
机动车安全技术检测仪器设备计算机控制与通信技术条件(中英文版)
Technical conditions for computer control and interactive communication with vehicle safety inspection equipment
  GB/T 33170.2-2016
大型活动安全要求 第2部分:人员管控(中英文版)
Safety requirements for large-scale activities—Part2:Personnel management and control
  GB/T 14048.18-2016
低压开关设备和控制设备 第7-3部分:辅助器件 熔断器接线端子排的安全要求(中英文版)
Low-voltage switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks
  GB/T 31445-2015
雾天高速公路交通安全控制条件(中英文版)
Standard for expressway traffic safety control under fog weather conditions
  GB 31459-2015
家用和类似用途地暖设备用温度控制系统的安全要求(中英文版)
Safety requirements for temperature control systems for floor heating for household and similar use
  GB 51024-2014
煤矿安全生产智能监控系统设计规范(中英文版)
Code for design of intelligent monitoring and control system of coal mine safety production
  GB/Z 30993-2014
测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式(中英文版)
Safety requirements for electrical equipment for measurement, control, and laboratory use―Conformity verification report for GB 4793.1-2007
  GB/T 30597-2014
燃气燃烧器和燃烧器具用安全和控制装置通用要求(中英文版)
General requirements of safety and control devices for gas burners and gas-burning appliances
  GB/Z 30249-2013
测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程(中英文版)
Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series
  GB 4793.9-2013
测量、控制和实验室用电气设备的安全要求 第9部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use―Part 9: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
  GB/T 30175-2013
机械安全 应用GB/T 16855.1和GB 28526设计安全相关控制系统的指南(中英文版)
Safety of machinery―Guidance on the application of GB/T 16855.1 and GB 28526 in the design of safety-related control systems
  GB/T 29308-2012
核电厂安全重要仪表和控制系统老化管理要求(中英文版)
Management requirement of ageing of instrumentation and control systems important to safety for nuclear power plants
  GB 28526-2012
机械电气安全 安全相关电气、电子和可编程电子控制系统的功能安全(中英文版)
Electrical safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
  GB 19212.3-2012
电力变压器、电源、电抗器和类似产品的安全 第3部分:控制变压器和内装控制变压器的电源的特殊要求和试验(中英文版)
Safety of power transformers, power supplies, reactors and similar products - Part 3: Particular requirements and tests for control transformers and power supplies incorporating control transformers
  GB/T 28471.2-2012
工业过程测量和控制系统用隔离式安全栅 第2部分:性能评定方法(中英文版)
Safety barrier for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance
  GB/T 28471.1-2012
工业过程测量和控制系统用隔离式安全栅 第1部分:通用技术条件(中英文版)
Safety barrier for use in industrial-process measure and control systems - Part 1: General technical specification
  GB/T 28216-2011
消费品质量安全因子评估和控制 通则(中英文版)
General principles - Assessment and control on consumer products quality safety factors
  GB 26509-2011
园林机械 以汽(柴)油机为动力的步进式草坪割草机 安全技术要求和试验方法(中英文版)
Garden machinery - Pedestrian-controlled lawnmower with a petrol(diesel)engine - Safety requirements and testing methods
  GB/T 15474-2010
核电厂安全重要仪表和控制功能分类(中英文版)
Classification on instrumentation and control function of instrumentation and control systems important to safety for nuclear power plants
  GB/T 24621.1-2009
低压成套开关设备和控制设备的电气安全应用指南 第1部分:成套开关设备(中英文版)
Application guide for electric safety of low-voltage switchgear and controlgear assemblies - Part 1: Switchgear assemblies
  GB 19510.1-2009
灯的控制装置 第1部分:一般要求和安全要求(中英文版)
Lamp controlgear - Part 1: General and safety requirements
  GB/T 23734-2009
食品生产加工小作坊质量安全控制基本要求(中英文版)
Basic requirements for quality and safety control of food workshop
  GB 22998-2008
机床安全 大规格数控车床与车削中心(中英文版)
Safety of machine tools - Large numerically controlled turning machines and turning centres
  GB 22997-2008
机床安全 小规格数控车床与车削中心(中英文版)
Safety of machine tools - Small numerically controlled turning machines and turning centres
  GB/T 14048.18-2008
低压开关设备和控制设备 第7-3部分:辅助器件 熔断器接线端子排的安全要求(中英文版)
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
  GB 22659-2008
木工机床安全 数控钻床和数控镂铣机(中英文版)
Safety of woodworking machines - Numerically controlled (NC)boring machines and routing machines
  GB 4793.7-2008
测量、控制和实验室用电气设备的安全要求 第7部分:实验室用离心机的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 7: Particular requirements for laboratory centrifuges
  GB 4793.2-2008
测量、控制和实验室用电气设备的安全要求 第2部分:电工测量和试验用手持和手操电流传感器的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2: Particular requirements for hand-held and hand-manipulated cruuent sensors for electrical test and measurement
  GB 4793.3-2008
测量、控制和实验室用电气设备的安全要求 第3部分:实验室用混合和搅拌设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Particular requirements for laboratory equipment for mixing and stirring
  GB 4793.5-2008
测量、控制和实验室用电气设备的安全要求 第5部分:电工测量和试验用手持探头组件的安全要求(中英文版)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 5: Safety requirements for hand-held probe assemblies for electrical measurement and test
  GB 4793.6-2008
测量、控制和实验室用电气设备的安全要求 第6部分:实验室用材料加热设备的特殊要求(中英文版)
Safety requirements for electrical for measurement, control, and laboratory use - Part 6: Particular requirements for laboratory equipment for the heating of materials
  GB/Z 21724-2008
出口蔬菜质量安全控制规范(中英文版)
Code on quality and safety control of vegetable for export
  GB/Z 21722-2008
出口茶叶质量安全控制规范(中英文版)
Code on quality and safety control of tea for export
  GB/Z 21702-2008
出口水产品质量安全控制规范(中英文版)
Code on quality and safety control of fishery products for export
  GB/Z 21701-2008
出口禽肉及制品质量安全控制规范(中英文版)
Code of quality and safety control on poultry and poultry products for export
  GB/Z 21700-2008
出口鳗鱼制品质量安全控制规范(中英文版)
Code on quality and safety control of eel products for export
  GB 4793.8-2008
测量、控制和试验室用电气设备的安全要求 第2-042部分:使用有毒气体处理医用材料及供试验室用的压力灭菌器和灭菌器的专用要求(中英文版)
Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials,and for laboratory processes
  GB/T 21098-2007
灯头、灯座及检验其安全性和互换性的量规 第4部分:导则及一般信息(中英文版)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
  GB 4793.1-2007
测量、控制和实验室用电气设备的安全要求 第1部分:通用要求(中英文版)
Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 1: General requirements
  GB/T 18272.7-2006
工业过程测量和控制 系统评估中系统特性的评定 第7部分:系统安全性评估(中英文版)
Industrial-process measurement and control-Evaluation of system properties for the purpose of system assessment-Part7:Assessment of system safety
  GB 9706.27-2005
医用电气设备 第2部分:输液泵和输液控制器安全专用要求(中英文版)
Medical eletrical equipment Part2:Particular requirements for the safety of infusion pumps and controllers
  GB/T 19671-2005
机械安全 双手操纵装置 功能状况及设计原则(中英文版)
Safety of machinery-Two-hand control devices-Functional aspects and design principles
  GB/T 16855.100-2005
机械安全 控制系统有关安全部件 第100部分:GB/T 16855.1的应用指南(中英文版)
Safety of machinery-Safety-related parts of control systems-Part 100:Guidelines for the use and application of GB/T 16855.1
  GB 4706.78-2005
家用和类似用途电器的安全 第二部分:步行控制的电动割草机的特殊要求(中英文版)
Safety of household and similar electrical appliances Part2:Particular requirements for pedestrian controlled mains-operated lawnmowers
  GB/T 15146.11-2004
反应堆外易裂变材料的核临界安全 基于限制和控制慢化剂的核临界安全(中英文版)
Nuclear criticality safety for fissile materials outside reactor--Nuclear criticalitysafety based on limiting and controlling moderators
  GB 4706.65-2003
家用和类似用途电器的安全 步行控制的电动草坪松土机和松砂机的专用要求(中英文版)
Safety of household and similar electrical appliances--Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
  GB 4793.4-2001
测量、控制及实验室用电气设备的安全 实验室用处理医用材料的蒸压器的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement,control and laboratory use--Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
  GB 17681-1999
易燃易爆罐区安全监控预警系统验收技术要求(中英文版)
Technical requirements of acceptance for safety monitoring,controlling and early warning system of inflammable and explosive tank farm
  GB 15146.5-1994
反应堆外易裂变材料的核临界安全 钚-天然铀混合物的核临界控制准则和次临界限值(中英文版)
Nuclear criticality safety for fissile materials outside reactor--Nuclearcriticality control criteria and subcritical limits for plutonium-natural uranium mixtures

找到:88條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1