中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 1927.13-2022
无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定(中英文版)
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity
  GB/T 1927.11-2022
无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版)
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain
  GB/T 41850.8-2022
机械振动 机器振动的测量和评价 第8部分:往复式压缩机系统(中英文版)
Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems
  GB/T 39960-2021
闭式单动机械压力机 参数和尺寸(中英文版)
Straight-sided single-action mechanical power presses -- Characteristicsand dimensions
  GB/T 1927.12-2021
无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版)
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain
  GB/T 7777-2021
容积式压缩机机械振动测量与评价(中英文版)
Measurement and evaluation of mechanical vibration of displacement compressors
  GB/T 40938-2021
皮革 物理和机械试验 水渗透压测定(中英文版)
Leather—Physical and mechanical tests—Determination of water penetration pressure
  GB/T 16702-2019
压水堆核电厂核岛机械设备设计规范(中英文版)
Design code for mechanical components in nuclear island of pressurized water reactor nuclear power plants
  GB/T 37903-2019
数控压力机可靠性评定方法(中英文版)
Reliability assessment method of NC mechanical presses
  GB/T 37048-2018
高速公路机电系统防雷技术规范(中英文版)
Technical specification for lightning protection of expressway electromechanical systems
  GB/T 35091-2018
闭式高速压力机 型式与基本参数(中英文版)
Straight-sided high-speed mechanical power presses—Types and basic parameters
  GB 27607-2011
机械压力机 安全技术要求(中英文版)
Mechanical press - Safety requirements
  GB 26483-2011
机械压力机 噪声限值(中英文版)
Noise limits of mechanical presses
  GB 14536.7-2010
家用和类似用途电自动控制器 压力敏感电自动控制器的特殊要求,包括机械要求(中英文版)
Automatic electrical controls for household and similar use - Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
  GB/T 24319-2009
釜用高压机械密封技术条件(中英文版)
Technical conditions of cauldron-using mechanical seal for high pressure
  GB/T 23561.7-2009
煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法(中英文版)
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient
  GB/T 23482-2009
开式压力机 术语(中英文版)
Open front mechanical power presses - Vocabulary
  GB/T 14347-2009
开式压力机 型式与基本参数(中英文版)
Open front mechanical power presses - Types and basic parameters
  GB/T 10924-2009
闭式单、双点压力机 精度(中英文版)
Straight sided single or two - Point mechanical power presses - Testing of the accuracy
  GB/T 14208.3-2009
纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分:压缩强度的测定(中英文版)
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength
  GB/T 23280-2009
开式压力机 精度(中英文版)
Open front mechanical power presses - Testing of the accuracy
  GB/T 9327-2008
额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求(中英文版)
Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements
  GB/T 11880-2008
模锻锤和大型机械锻压机用模块技术条件(中英文版)
Specification of large die-blocks used for die-forging hammer and mechanical forging press
  GB/T 4937.2-2006
半导体器件 机械和气候试验方法 第2部分:低气压(中英文版)
Semiconductor devices―Mechanical and climatic test methods―Part 2: Low air pressure
  GB/T 20201-2006
灌溉用聚乙烯(PE)压力管机械连接管件(中英文版)
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
  GB/T 7777-2003
容积式压缩机机械振动测量与评价(中英文版)
Measurement and evaluation of mechanical vibration of displacement compressors

找到:26條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1