中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 6881-2023 声学 声压法测定噪声源声功率级和声能量级 混响室精密法(中英文版) Acoustics - Determination of sound power level and sound energy level of noise sources by sound pressure method - Reverberation chamber precision method |
|||
GB/T 43211-2023 软木粒机械筛分测定粒度的试验方法(中英文版) Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving |
|||
GB/T 18950-2023 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定(中英文版) Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. |
|||
GB/T 12598-2023 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定(中英文版) Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding |
|||
GB/T 33061.7-2023 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法(中英文版) Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method |
|||
GB/T 5758-2023 离子交换树脂粒度、有效粒径和均一系数的测定方法(中英文版) Method for determination of particle size, effective particle size and uniformity coefficient of ion exchange resin |
|||
GB/T 33061.4-2023 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法(中英文版) Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method |
|||
GB/T 33061.6-2023 塑料 动态力学性能的测定 第6部分:非共振剪切振动法(中英文版) Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method |
|||
GB/T 17928-2023 皮革 物理和机械试验 针孔撕裂强度的测定(中英文版) Leather - Physical and mechanical tests - Determination of pinhole tear strength |
|||
GB/T 33061.5-2023 塑料 动态力学性能的测定 第5部分:非共振弯曲振动法(中英文版) Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method |
|||
GB/T 27698.4-2023 热交换器及传热元件性能测试方法 第4部分:空冷器噪声测定(中英文版) Performance test methods for heat exchangers and heat transfer elements - Part 4: Noise determination of air coolers |
|||
GB/T 8094-2023 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定(中英文版) Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unloading mechanism |
|||
GB/T 10561-2023 钢中非金属夹杂物含量的测定 标准评级图显微检验法(中英文版) Determination of the content of non-metallic inclusions in steel - standard grading chart microscopic examination method |
|||
GB/T 34877.2-2023 工业风机 标准实验室条件下风机声功率级的测定 第2部分:混响室法(中英文版) Industrial fans - Determination of fan sound power levels under standard laboratory conditions - Part 2: Reverberation chamber method |
|||
GB/T 43607-2023 钯锭分析方法 银、铝、金、铋、铬、铜、铁、铱、镁、锰、镍、铅、铂、铑、钌、硅、锡、锌含量测定 火花放电原子发射光谱法(中英文版) Palladium ingot analysis method Determination of silver, aluminum, gold, bismuth, chromium, copper, iron, iridium, magnesium, manganese, nickel, lead, platinum, rhodium, ruthenium, silicon, tin, zinc content Spark discharge atomic emission spectrometry |
|||
GB/T 19494.3-2023 煤炭机械化采样 第3部分:精密度测定和偏倚试验(中英文版) Mechanized sampling of coal Part 3: Determination of precision and bias testing |
|||
GB 5009.289-2023 食品安全国家标准 食品中低聚半乳糖的测定(中英文版) National food safety standards Determination of galactooligosaccharides in food |
|||
GB/T 13477.21-2022 建筑密封材料试验方法 第21部分:人工加速气候老化后颜色变化的测定(中英文版) Test methods for building sealing materials - Part 21: Determination of color change after artificial accelerated weathering |
|||
GB/T 1927.14-2022 无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain |
|||
GB/T 41524-2022 玩具材料中短链氯化石蜡含量的测定 气相色谱-质谱联用法(中英文版) Determination of short-chain chlorinated paraffins in toy materials by gas chromatography-mass spectrometry |
|||
GB/T 1927.13-2022 无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定(中英文版) Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity |
|||
GB/T 1927.15-2022 无疵小试样木材物理力学性质试验方法 第15部分:横纹抗拉强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains |
|||
GB/T 1927.11-2022 无疵小试样木材物理力学性质试验方法 第11部分:顺纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain |
|||
GB/T 1927.16-2022 无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定(中英文版) Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain |
|||
GB/T 10322.6-2022 高炉炉料用铁矿石 热裂指数的测定(中英文版) Determination of hot cracking index of iron ore for blast furnace charge |
|||
GB/T 41415-2022 纺织品 干湿热条件下尺寸变化率的测定(中英文版) Textiles - Determination of dimensional change rate under dry, wet and hot conditions |
|||
GB/T 5988-2022 耐火材料? 加热永久线变化试验方法(中英文版) Refractory products—Determination of permanent change in dimensions on heating |
|||
GB/T 1927.21-2022 无疵小试样木材物理力学性质试验方法 第21部分:握钉力测定(中英文版) Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force |
|||
GB/T 37211.3-2022 金属锗化学分析方法 第3部分:痕量杂质元素的测定 辉光放电质谱法(中英文版) Methods for chemical analysis of germanium metal - Part 3: Determination of trace impurity elements - Glow discharge mass spectrometry |
|||
GB/T 13477.22-2022 建筑密封材料试验方法 第22部分:固化特性的测定(中英文版) Test methods for building sealing materials - Part 22: Determination of curing characteristics |
|||
GB/T 41932-2022 塑料 断裂韧性(GIC和KIC)的测定 线弹性断裂力学(LEFM)法(中英文版) Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method |
|||
GB/T 41933-2022 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法(中英文版) Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method |
|||
GB/T 19466.5-2022 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间,反应焓和转化率的测定(中英文版) Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion |
|||
GB/T 33061.11-2022 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度(中英文版) Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature |
|||
GB/T 41937-2022 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性(中英文版) Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method |
|||
GB/T 30661.6-2022 轮椅车座椅 第6部分:模拟使用和座垫性能变化的测定(中英文版) Seats for wheelchairs - Part 6: Simulated use and determination of seat cushion performance changes |
|||
GB/T 18029.2-2022 轮椅车 第2部分:电动轮椅车动态稳定性的测定(中英文版) Wheelchairs - Part 2: Determination of the dynamic stability of electric wheelchairs |
|||
GB/T 5211.14-2021 颜料和体质颜料通用试验方法 第14部分:筛余物的测定 机械冲洗法(中英文版) General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical flushing procedure |
|||
GB/T 2408-2021 塑料 燃烧性能的测定 水平法和垂直法(中英文版) Plastics—Determination of burning characteristics—Horizontal and vertical test |
|||
GB/T 15596-2021 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定(中英文版) Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
|||
GB/T 40263-2021 纺织品 短链氯化石蜡的测定(中英文版) Textiles—Determination of short chain chlorinated paraffins |
|||
GB/T 40152-2021 蜂蜜中蔗糖转化酶的测定 分光光度法(中英文版) Determination of saccharase activity in honey—Spectrophotometric method |
|||
GB/T 22889-2021 皮革 物理和机械试验 表面涂层厚度的测定(中英文版) Leather—Physical and mechanical tests—Determination of surface coating thickness |
|||
GB/T 22888-2021 皮革 物理和机械试验 表面涂层低温脆裂温度的测定(中英文版) Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
|||
GB/T 40031-2021 电子电气产品中多氯化萘的测定 气相色谱-质谱法(中英文版) Determination of medium chain chlorinated paraffins in electrical and electronic products |
|||
GB/T 40030-2021 电子电气产品中中链氯化石蜡的检测方法(中英文版) Determination of medium chain chlorinated paraffins in electrical and electronic products |
|||
GB/T 39822-2021 塑料 黄色指数及其变化值的测定(中英文版) Plastics—Determination of yellowness index and change in yellowness index |
|||
GB/T 39804-2021 墙体材料中可浸出有害物质的测定方法(中英文版) Method for determination of leachable harmful substances in wall materials |
|||
GB/T 39748.10-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分:电位滴定法测定可萃取聚合物量(中英文版) Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration |
|||
GB/T 39748.11-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分:可吸入颗粒含量的测定(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles |
|||
GB/T 39748.7-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分:称重法测定压力作用下的吸液量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure |
|||
GB/T 39748.8-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分:称重法测定流量(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate |
|||
GB/T 39748.9-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分:称重法测定密度(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density |
|||
GB/T 39748.6-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
|||
GB/T 12736-2021 输送带 机械接头强度的测定 静态试验方法(中英文版) Conveyor belts—Determination of strenght of mechanical fastenings—Static test method |
|||
GB/T 1927.12-2021 无疵小试样木材物理力学性质试验方法 第12部分:横纹抗压强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain |
|||
GB/T 1927.3-2021 无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood |
|||
GB/T 1927.4-2021 无疵小试样木材物理力学性质试验方法 第4部分:含水率测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content |
|||
GB/T 1927.5-2021 无疵小试样木材物理力学性质试验方法 第5部分:密度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density |
|||
GB/T 1927.6-2021 无疵小试样木材物理力学性质试验方法 第6部分:干缩性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage |
|||
GB/T 1927.7-2021 无疵小试样木材物理力学性质试验方法 第7部分:吸水性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption |
|||
GB/T 1927.8-2021 无疵小试样木材物理力学性质试验方法 第8部分:湿胀性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling |
|||
GB/T 1927.10-2021 无疵小试样木材物理力学性质试验方法 第10部分:抗弯弹性模量测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending |
|||
GB/T 1927.17-2021 无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength |
|||
GB/T 1927.18-2021 无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation |
|||
GB/T 1927.19-2021 无疵小试样木材物理力学性质试验方法 第19部分:硬度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness |
|||
GB/T 1927.20-2021 无疵小试样木材物理力学性质试验方法 第20部分:抗劈力测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength |
|||
GB/T 1927.9-2021 无疵小试样木材物理力学性质试验方法 第9部分:抗弯强度测定(中英文版) Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength |
|||
GB/T 40927-2021 皮革 物理和机械试验 漆皮耐热性能的测定(中英文版) Leather—Physical and mechanical tests—Determination of heat resistance of patent leather |
|||
GB/T 40936-2021 皮革 物理和机械试验 服装革防水性能的测定(中英文版) Leather—Physical and mechanical tests—Determination of water repellency of garment leather |
|||
GB/T 40938-2021 皮革 物理和机械试验 水渗透压测定(中英文版) Leather—Physical and mechanical tests—Determination of water penetration pressure |
|||
GB/T 40726-2021 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定(中英文版) Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles |
|||
GB/T 40815.2-2021 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分:强迫风冷的确定方法(中英文版) Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling |
|||
GB/T 40789-2021 气体分析 一氧化碳含量、二氧化碳含量和氧气含量在线自动测量系统 性能特征的确定(中英文版) Gas analysis—Online automated measuring systems for content of carbon monoxide,carbon dioxide and oxygen—Determination of performance characteristics |
|||
GB/T 39500-2020 皮革 物理和机械试验 视密度和单位面积质量的测定(中英文版) Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area |
|||
GB/T 39507-2020 皮革 物理和机械试验 耐磨性能的测定:马丁代尔球盘法(中英文版) Leather—Physical and mechanical tests—Determination of abrasion resistance:Martindale ball plate method |
|||
GB/T 39059-2020 运动场地合成材料面层有害物质释放量的测定 环境测试舱法(中英文版) Determination of harmful substance emissions from synthetic sports surfaces—Environmental chambers method |
|||
GB/T 38939-2020 镍基合金 多元素含量的测定 火花放电原子发射光谱分析法(常规法)(中英文版) Nickel-based alloy—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(routine method) |
|||
GB/T 14513.3-2020 气动 使用可压缩流体元件的流量特性测定 第 3 部分:系统稳态流量特性的计算方法(中英文版) Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems |
|||
GB/T 38733-2020 办公家具 办公椅 尺寸测量方法(中英文版) Office furniture—Office chairs—Methods for the determination of dimensions |
|||
GB/T 5137.4-2020 汽车安全玻璃试验方法 第4部分:太阳能特性试验(中英文版) Test methods of safety glazing materials used on road vehicles—Part 4:Determination of solar characteristic |
|||
GB/T 38611-2020 办公家具 办公工作椅 稳定性、强度和耐久性测试方法(中英文版) Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability |
|||
GB/T 39560.2-2020 电子电气产品中某些物质的测定 第2部分:拆解、拆分和机械制样(中英文版) Determination of certain substances in electrical and electronic products—Part 2: Disassembly,disjointment and mechanical sample preparation |
|||
GB/T 7758-2020 硫化橡胶 低温性能的测定 温度回缩程序(TR 试验)(中英文版) Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) |
|||
GB/T 39368-2020 皮革 物理和机械试验 耐折牢度的测定:鞋面弯曲法(中英文版) Leather—Physical and mechanical tests—Determination of flex resistance:Vamp flex method |
|||
GB/T 39371-2020 皮革 物理和机械试验 柔软度的测定(中英文版) Leather—Physical and mechanical tests—Determination of softness |
|||
GB/T 39422-2020 木结构销槽承压强度及钉连接承载力特征值确定方法(中英文版) Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure |
|||
GB/T 5169.46-2020 电工电子产品着火危险试验 第46部分:试验火焰 非接触火焰源中起燃时特征热通量的测定(中英文版) Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source |
|||
GB/T 39365-2020 皮革 物理和机械试验 耐干热性的测定(中英文版) Leather—Physical and mechanical tests—Determination of dry heat resistance |
|||
GB/T 39370-2020 皮革 物理和机械试验 表面反射性能的测定(中英文版) Leather—Physical and mechanical tests—Determination of surface reflectance |
|||
GB/T 39375-2020 皮革 物理和机械试验 尺寸变化的测定(中英文版) Leather—Physical and mechanical tests—Determination of dimensional change |
|||
GB/T 39372-2020 皮革 物理和机械试验 伸长率的测定(中英文版) Leather—Physical and mechanical tests—Determination of percentage extension |
|||
GB/T 39374-2020 皮革 物理和机械试验 弯折力的测定(中英文版) Leather—Physical and mechanical tests—Determination of bending force |
|||
GB/T 39369-2020 皮革 物理和机械试验 透水汽性测定(中英文版) Leather—Physical and mechanical tests—Determination of water vapour permeability |
|||
GB/T 17634-2019 土工布及其有关产品 有效孔径的测定 湿筛法(中英文版) Geotextiles and geotextile-related products—Determination of the characteristic opening size—Wet sieving method |
|||
GB/T 37757-2019 电子电气产品用材料和零部件中挥发性有机物释放速率的测定 释放测试舱-气相色谱质谱法(中英文版) Determination of emission rate of volatile organic compounds from materials and components used in electrical and electronic products—Emission test chamber-gas chromatography mass spectrometry |
|||
GB/T 38268-2019 纺织染整助剂产品中短链氯化石蜡的测定(中英文版) Determination of short chain chlorinated paraffins in textiles dyeing and finishing auxiliaries |
|||
GB/T 38405-2019 皮革和毛皮 化学试验 短链氯化石蜡的测定(中英文版) Leather and fur—Chemical tests—Determination of short-chain chlorinated paraffins |
|||
GB/T 38268-2019 纺织染整助剂产品中短链氯化石蜡的测定(中英文版) Determination of short chain chlorinated paraffins in textiles dyeing and finishing auxiliaries |
|||
GB/T 38006-2019 纺织品 织物经蒸汽熨烫后尺寸变化试验方法(中英文版) Textiles—Method for determination of dimensional changes of fabrics by steam ironing |
|||
GB/T 15399-2018 饲料中含硫氨基酸的测定 离子交换色谱法(中英文版) Determination of sulfur amino acids in feeds—Ion exchange chromatography |
|||
GB/T 35818-2018 林业生物质原料分析方法 多糖及木质素含量的测定(中英文版) Standard method for analysis of forestry biomass-Determination of structural polysaccharides and lignin |
|||
GB/T 1043.2-2018 塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验(中英文版) Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test |
|||
GB/T 36058-2018 林业生物质原料分析方法 不可溶性糖测定(中英文版) Method for analysis of forestry biomas—Determination of insoluble saccharides content |
|||
GB/T 36056-2018 林业生物质原料分析方法 可溶性糖的测定(中英文版) Method for analysis of forestry biomass—Determination of soluble saccharides content |
|||
GB/T 36590-2018 高纯银化学分析方法 痕量杂质元素的测定 辉光放电质谱法(中英文版) Method for chemical analysis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry |
|||
GB/T 36800.2-2018 塑料 热机械分析法(TMA) 第2部分:线性热膨胀系数和玻璃化转变温度的测定(中英文版) Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
|||
GB/T 36799-2018 胶粘剂挥发性有机化合物释放量的测定 微舱法(中英文版) Determination of the emissions of volatile organic compounds from adhesives—Micro-scale chamber method |
|||
GB/T 36532-2018 纤维增强塑料 热固性模塑料和预浸料 固化特性测定(中英文版) Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics |
|||
GB/T 11349.1-2018 机械振动与冲击 机械导纳的试验确定 第1部分:基本术语与定义、传感器特性(中英文版) Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications |
|||
GB/T 2408-2008/XG1-2018 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单(中英文版) Plastics - Determination of burning characteristics - Horizontal and vertical test |
|||
GB/T 36769-2018 阳离子交换树脂再生转型率测定方法(中英文版) Determination of percent regeneration of cation exchange resins |
|||
GB/T 34848-2017 热收缩薄膜收缩性能试验方法(中英文版) Determination of shrinkage character for heat-shrinkable films |
|||
GB/T 34615-2017 水泥窑协同处置的生活垃圾预处理可燃物燃烧特性检测方法(中英文版) Determination of combustion characteristics of CMSW for coprocessing in cement kiln |
|||
GB/T 34209-2017 不锈钢 多元素含量的测定 辉光放电原子发射光谱法(中英文版) Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry |
|||
GB/T 13477.19-2017 建筑密封材料试验方法 第19部分:质量与体积变化的测定(中英文版) Test method for building sealants—Part 19:Determination of change in mass and volume |
|||
GB/T 33611-2017 纺织品 短链对特辛基苯酚乙氧基化物的测定(中英文版) Textiles—Determination of short chain 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylate |
|||
GB/T 14513.1-2017 气动 使用可压缩流体元件的流量特性测定 第1部分:稳态流动的一般规则和试验方法(中英文版) Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow |
|||
GB/T 35495-2017 弹性密封胶暴露于动态人工气候老化后内聚形态变化的试验方法(中英文版) Determination of changes in cohesion for elastic sealants after dynamic artificial weathering |
|||
GB/T 33236-2016 多晶硅 痕量元素化学分析 辉光放电质谱法(中英文版) Polycrystalline silicon—Determination of trace elements—Glow discharge mass spectrometry method |
|||
GB/T 33345-2016 电子电气产品中短链氯化石蜡的测定 气相色谱-质谱法(中英文版) Determination of short chain chlorinated paraffins in electrical and electronic products—Gas chromatography-mass spectrometry |
|||
GB/T 24218.5-2016 纺织品 非织造布试验方法 第5部分:耐机械穿透性的测定(钢球顶破法)(中英文版) Textiles—Test methods for nonwovens—Part 5: Determination of resistance to mechanical penetration (ball burst method) |
|||
GB/T 15789-2016 土工布及其有关产品 无负荷时垂直渗透特性的测定(中英文版) Geotextiles and geotextile-related products—Determination of water permeability characteristics normal to the plane,without load |
|||
GB/T 33061.1-2016 塑料 动态力学性能的测定 第1部分:通则(中英文版) Plastics—Determination of dynamic mechanical properties—Part 1: General principles |
|||
GB/T 33061.10-2016 塑料 动态力学性能的测定 第10部分:使用平行平板振荡流变仪测定复数剪切黏度(中英文版) Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer |
|||
GB/T 8834-2016 纤维绳索 有关物理和机械性能的测定(中英文版) Fibre ropes —Determination of certain physical and mechanical properties |
|||
GB/T 32616-2016 纺织品色牢度试验 试样变色的仪器评级方法(中英文版) Textiles—Tests for colour fastness—instrumental assessment of change in color for determination of grey scale rating |
|||
GB/T 4336-2016 碳素钢和中低合金钢 多元素含量的测定 火花放电原子发射光谱法(常规法)(中英文版) Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) |
|||
GB/T 32524.2-2016 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分:反射面上方近似自由场的工程法(中英文版) Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane |
|||
GB/T 32524.1-2016 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分:半消声室精密法(中英文版) Acoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms |
|||
GB/T 31926-2015 钢板及钢带 锌基和铝基镀层中铅、镉和铬含量的测定 辉光放电原子发射光谱法(中英文版) Zinc and aluminum based coatings on steel sheets and strips—Determination of lead,cadmium and chromium contens—Glow discharge atomic emission spectrometry method |
|||
GB/T 5159-2015 金属粉末(不包括硬质合金用粉) 与成型和烧结有联系的尺寸变化的测定方法(中英文版) Metallic powders,excluding powders for hardmetals—Determination of dimensional changes associated with compacting and sintering |
|||
GB/T 31762-2015 木质材料及其制品中苯酚释放量测定 小型释放舱法(中英文版) Determination of phenol emission from wooden materials and their furnishing products—Small chamber method |
|||
GB/T 30661.3-2015 轮椅车座椅 第3部分:体位支撑装置的静态、冲击和疲劳强度测定(中英文版) Wheelchair seating—Part 3: Determination of static, impact and repetitive load strengths for postural support devices |
|||
GB/T 31532-2015 牙膏中丁磺氨钾和糖精钠的测定 高效液相色谱法(中英文版) Determination of acesulfame potassium and sodium saccharin in toothpaste—High performance liquid chromatography |
|||
GB/T 31565-2015 热交换器用钢板搪瓷边缘覆盖率的测定(中英文版) Vitreous ang porcelain enamels—Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
|||
GB/T 30661.2-2014 轮椅车座椅 第2部分:维持组织完整性装置的物理和机械特性测定 座垫(中英文版) Wheelchair seating―Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity―Seat cushions |
|||
GB/T 31107-2014 家具中挥发性有机化合物检测用气候舱通用技术条件(中英文版) Environmental chamber for the determination of volatile organic compounds of furniture―General technical requirements |
|||
GB/T 30823-2014 测定工业淬火油冷却性能的镍合金探头试验方法(中英文版) Nickel-alloy probe test method for determination cooling characteristics of industrial quenching oil |
|||
GB/T 30316-2013 影像材料 胶片和相纸 尺寸变化的测定(中英文版) Imaging materials―Film and paper―Determination of dimensional change |
|||
GB/T 30390-2013 油料种籽中果糖、葡萄糖、蔗糖含量的测定 高效液相色谱法(中英文版) Determination of monosaccharide and disaccharide in oil seeds—High-performance liquid chromatography |
|||
GB/T 8630-2013 纺织品 洗涤和干燥后尺寸变化的测定(中英文版) Textiles―Determination of dimensional change in washing and drying |
|||
GB/T 8628-2013 纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量(中英文版) Textiles—Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
|||
GB/T 29899-2013 人造板及其制品中挥发性有机化合物释放量试验方法 小型释放舱法(中英文版) Determination of the emission of volatile organic compounds from wood-based panels and furnishing - Small chamber method |
|||
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|||
GB/T 8107-2012 液压阀 压差-流量特性的测定(中英文版) Hydraulic fluid power-Valves - Determination of pressure differential/flow characteristics |
|||
GB/T 8151.18-2012 锌精矿化学分析方法 第18部分:锌量的测定 离子交换-Na2EDTA滴定法(中英文版) Methods for chemical analysis of zinc concentrates - Part 18: Determination of zinc content - Ion-exchange/ Na2EDTA titrimetric method |
|||
GB/T 14999.4-2012 高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版) Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings |
|||
GB/T 7052-2012 色素炭黑 流动度的测定(中英文版) Colour carbon black - Determination of flow characteristic |
|||
GB/T 28487-2012 贵金属及其合金链 抗拉强度的测定 拉伸试验法(中英文版) Precious metal alloys chains - Determination of tensile strength - Method of tensile testing |
找到:285條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |