中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB 6067.1-2010
起重機械安全規程 第1部分:總則(中英文版)
Safety rules for lifting appliances - Part 1: General
特價
  SJ 50681/31-1994
tnc系列(不接電纜)插孔接觸件鎖緊螺母安裝氣密封2級射頻同軸插座連接器詳細規範(中英文版)
Connectors, receptacle, coaxial, radio frequency(series TNC(uncabled), socket contact, jamnut mounted, hermetic sealed, class 2), detail specification for
  QB/T 3792-1999
食品添加劑.菊花黃(中英文版)
Food additive.Coreopsis-yellow
  GB/T 20168-2006
快淬釹鐵硼永磁粉(中英文版)
Rapidly-quenched neodymium iron boron permanent magnetic powder
  GB/T 3091-2008
低壓流體輸送用焊接鋼管(中英文版)
Welded steel pipes for low pressure liquid delivery
特價
  TB 2065-1989
機車牽引用柴油機等離子噴塗金屬鉬塗層技術條件(中英文版)
(Diesel locomotives plasma sprayed molybdenum coating technology conditions)
  SY/T 5841-2011
鑽井技術經濟指標及計算方法(中英文版)
Drilling tech-economic indexes and calculation methods
  QB/T 1583-2005
皮制手套號型(中英文版)
Size designation of leather gloves
  QC/T 941-2013
汽車材料中汞的檢測方法(中英文版)
Test methods of mercury in automobiles materials
  GB/T 17517-1998
膠粘劑壓縮剪切強度試驗方法 木材與木材(中英文版)
Adhesives--Wood to wood adhesive bonds--Determination of shear strength by compression loading
  GB/T 23485-2009
城鎮汙水處理廠污泥處置 混合填埋用泥質(中英文版)
The disposal of sludge from municipal wastewater treatment plant - Quality of sludge for co-landfilling
  SJ/T 2964.2-2013
電子元器件品質評定體系規範 壓電陶瓷鑒頻器 第2部分:分規範 鑒定批准(中英文版)
Piezoelectric ceramic discriminators. A specification in the quality assessment system for electronic components. Part 2: Sectional specification. Qualification approval
  JT 421-2000
港口固定起重機安全規程(中英文版)
Safety rules for the harbour stationary crane
  TB/T 2591-2007
鐵路機車滾動軸承訂貨技術條件(中英文版)
Specification for rolling bearing of rail-locomotive for booking
  SH/T 0194-1992
潤滑油和含添加劑油的活性硫測定法(中英文版)
(Determination of active sulfur-containing additives, lubricants and oils)
  GB/T 6379.2-2004
測量方法與結果的準確度(正確度與精密度) 第2部分:確定標準測量方法重複性與再現性的基本方法(中英文版)
Accuracy(trueness and precision)of measurement methods and results--Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
特價
  JJG 2083-1990
光譜輻射亮度 光譜輻射照度計量器具檢定系統(中英文版)
Verification Scheme of Measuring Instruments for Spectral Radiance and Irradiance
  FZ/T 12010-2001
棉氨綸包芯本色紗(中英文版)
Cotton covered spandex grey yarn
  SN/T 4314-2015
出口模具檢驗規程(中英文版)
(Export mold inspection procedures)
  JJF 1084-2002
框式水平儀和條式水平儀校準規範(中英文版)
Calibration Specification for Frame Levels and Shaft Levels
  GB 19452-2004
氧化性危險貨物危險特性檢驗安全規範(中英文版)
Safety code for inspection of hazardous properties for dangerous goods of oxidizing substances
  GB/T 28713.2-2012
管殼式熱交換器用強化傳熱元件 第2部分:不銹鋼波紋管(中英文版)
Enhanced heat transfer elements used in tube-shell heat exchangers- Part 2:Stainless steel corrugated tubes
  YD 5096-2000
(中英文版)
Interim Provisions for Test of Anti-seismic Performances of Power Supply Equipment for Telecommunications
  GY/T 198-2003
有線數位電視廣播qam調製器技術要求和測量方法(中英文版)
Specifications and methods of measurement on QAM modulator used in digital cable broadcasting system
  JG/T 338-2011
建築玻璃用隔熱塗料(中英文版)
Thermal insulation coatings for building glass
  HG/T 4504-2013
工業過氧化鎂(中英文版)
Magnesium peroxide for industrial use
  GB/T 21403-2008
噴灌設備 文丘裡式差壓液體添加射流器(中英文版)
Irrigation equipment - Differential pressure Venturi-type liquid additive injectors
  GB 9706.17-2009
醫用電氣設備 第2部分:γ射束治療設備安全專用要求(中英文版)
Medical electrical equipment - Part 2: Particular requirements for the safety of gamma beam therapy equipment
  YD/T 2455.6-2013
電信網視頻監控系統 第6部分:服務品質要求(中英文版)
Visual surveillance system over telecommunication networks. Part 6: QoS requirements
  HG/T 2871-1997
膠鞋整鞋屈撓試驗方法(中英文版)
Determination of flex resistance of whole rubber shoes
  GB/T 13782-1992
紡織纖維長度分佈參數試驗方法 電容法(中英文版)
Test method for textile fibre length distribution parameters--Electric condenser method
  GB/T 4103.4-2012
鉛及鉛合金化學分析方法 第4部分:鐵量的測定(中英文版)
Methods for chemical analysis of lead and lead alloys - Part 4: Determination of iron content
  DL/T 665-2009
水汽集中取樣分析裝置驗收導則(中英文版)
Inspection guide for water and steam integrated sampling and on-line analysing unit
  HG 21601-1999
常壓快開不銹鋼手孔(中英文版)
(Stainless steel pressure quick hand hole)
  GB/T 7253-2019
(中英文版)
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type
  SN/T 0972-2012
出口可哥豆檢驗規程(中英文版)
Rules for the inspection of cocoa beans for export
  GB/T 1844.3-2008
塑膠 符號和縮略語 第3部分:增塑劑(中英文版)
Plastics - Symbols and abbrebiated terms - Part 3: Plasticizers
  GB/T 25966-2010
帶電輔助能源的家用太陽能熱水系統技術條件(中英文版)
Specification of domestic solar water heating systems with electrical auxiliary heat source
  SJ 2575-1985
薄膜介質c類預調可變電容器總技術條件(中英文版)
(Class C preset film dielectric variable capacitors total technical conditions)
  GB/T 6730.47-2017
鐵礦石 鈮含量的測定 氯代磺酚S分光光度法(中英文版)
Iron ores—Determination of niobium content—Sulfochlorophenol S spectrophotometric method
特價
  GB 29702-2013
食品安全國家標準 水產品中甲氧苄啶殘留量的測定 高效液相色譜法(中英文版)
National Food Safety Standard-Determination of Trimethoprim Residue in Aquatic Products by High Performance Liquid Chromatography
  GB 51247-2018
水工建築物抗震設計標準(中英文版)
Seismic design standard for hydraulic structures
特價
  GB 50458-2008
跨座式單軌交通設計規範(中英文版)
Code for design of straddle monorail transit
特價
  GB/T 2315-2017
電力金具標稱破壞載荷系列及連接型式尺寸(中英文版)
Specified failure load series and coupling dimensions for electric power fittings
  GB/T 15259-2008
礦山安全術語(中英文版)
Terms relating to mine safety
特價
  GB/T 9217.10-2005
硬質合金旋轉銼 第10部分:錐形圓頭旋轉銼(L型)(中英文版)
Hardmetal burrs--Part 10:Conical round-(ball-)nose burrs(style L)
  SJ/T 31293-1994
幹簧自動封結機完好要求和檢查評定方法(中英文版)
Requirements of readiness and methods of inspection and assessment for automatic reed sealing machines
  JR/T 0032-2007
保險術語(修訂版)(中英文版)
Insurance Terminology (Revised Edition)
  GB/T 31192-2014
常溫銅系脫砷劑砷容試驗方法(中英文版)
Test method of arsenic content for copper series arsenic removal capacity at room temperature
  TB 1539.4-1984
冷沖模導向裝置 滑動導套(b型)(中英文版)
(Die guide sliding bushings (B type))

找到:110742條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [36] [37] [38] [39] [40] [41] [42]